//
// simple driver to test "ecdhp384" core in hardware
//
//
// note, that the test program needs a custom bitstream where
// the core is located at offset 0 (without the core selector)
//
// stm32 headers
#include "stm-init.h"
#include "stm-led.h"
#include "stm-fmc.h"
// locations of core registers
#define CORE_ADDR_NAME0 (0x00 << 2)
#define CORE_ADDR_NAME1 (0x01 << 2)
#define CORE_ADDR_VERSION (0x02 << 2)
#define CORE_ADDR_CONTROL (0x08 << 2)
#define CORE_ADDR_STATUS (0x09 << 2)
// locations of data buffers
#define CORE_ADDR_BUF_K (0x80 << 2)
#define CORE_ADDR_BUF_XIN (0x90 << 2)
#define CORE_ADDR_BUF_YIN (0xA0 << 2)
#define CORE_ADDR_BUF_XOUT (0xB0 << 2)
#define CORE_ADDR_BUF_YOUT (0xC0 << 2)
// bit maps
#define CORE_CONTROL_BIT_NEXT 0x00000002
#define CORE_STATUS_BIT_READY 0x00000002
// curve selection
#define USE_CURVE 2
#include "../../../user/shatov/ecdh_fpga_model/ecdh_fpga_model.h"
#include "../../../user/shatov/ecdh_fpga_model/test_vectors/ecdh_test_vectors.h"
#define BUF_NUM_WORDS (OPERAND_WIDTH / (sizeof(uint32_t) << 3)) // 8
//
// test vectors
//
static const uint32_t p384_da[BUF_NUM_WORDS] = P_384_DA;
static const uint32_t p384_db[BUF_NUM_WORDS] = P_384_DB;
static const uint32_t p384_gx[BUF_NUM_WORDS] = P_384_G_X;
static const uint32_t p384_gy[BUF_NUM_WORDS] = P_384_G_Y;
static const uint32_t p384_qax[BUF_NUM_WORDS] = P_384_QA_X;
static const uint32_t p384_qay[BUF_NUM_WORDS] = P_384_QA_Y;
static const uint32_t p384_qbx[BUF_NUM_WORDS] = P_384_QB_X;
static const uint32_t p384_qby[BUF_NUM_WORDS] = P_384_QB_Y;
static const uint32_t p384_qa2x[BUF_NUM_WORDS] = P_384_QA2_X;
static const uint32_t p384_qa2y[BUF_NUM_WORDS] = P_384_QA2_Y;
static const uint32_t p384_qb2x[BUF_NUM_WORDS] = P_384_QB2_X;
static const uint32_t p384_qb2y[BUF_NUM_WORDS] = P_384_QB2_Y;
static const uint32_t p384_sx[BUF_NUM_WORDS] = P_384_S_X;
static const uint32_t p384_sy[BUF_NUM_WORDS] = P_384_S_Y;
static const uint32_t p384_0[BUF_NUM_WORDS] = P_384_ZERO;
static const uint32_t p384_1[BUF_NUM_WORDS] = P_384_ONE;
static const uint32_t p384_hx[BUF_NUM_WORDS] = P_384_H_X;
static const uint32_t p384_hy[BUF_NUM_WORDS] = P_384_H_Y;
static const uint32_t p384_n[BUF_NUM_WORDS] = P_384_N;
static uint32_t p384_2[BUF_NUM_WORDS]; // 2
static uint32_t p384_n1[BUF_NUM_WORDS]; // n + 1
static uint32_t p384_n2[BUF_NUM_WORDS]; // n + 2
//
// prototypes
//
void toggle_yellow_led(void);
int test_p384_multiplier(const uint32_t *k,
const uint32_t *xin, const uint32_t *yin,
const uint32_t *xout, const uint32_t *yout);
//
// test routine
//
int main()
{
int ok;
stm_init();
fmc_init();
led_on(LED_GREEN);
led_off(LED_RED);
led_off(LED_YELLOW);
led_off(LED_BLUE);
uint32_t core_name0;
uint32_t core_name1;
fmc_read_32(CORE_ADDR_NAME0, &core_name0);
fmc_read_32(CORE_ADDR_NAME1, &core_name1);
// "ecdh", "p384"
if ((core_name0 != 0x65636468) || (core_name1 != 0x70333834)) {
led_off(LED_GREEN);
led_on(LED_RED);
while (1);
}
// prepare more numbers
size_t w;
for (w=0; w<BUF_NUM_WORDS; w++)
{ p384_2[w] = p384_0[w]; // p384_2 = p384_z = 0
p384_n1[w] = p384_n[w]; // p384_n1 = p384_n = N
p384_n2[w] = p384_n[w]; // p384_n2 = p384_n = N
}
// note, that we can safely cheat and compute n+1 and n+2 by
// just adding 1 and 2 to the least significant word of n, the
// word itself is 0xccc52973, so it will not overflow and we don't
// need to take care of carry propagation
p384_2[BUF_NUM_WORDS-1] += 2; // p384_2 = 2
p384_n1[BUF_NUM_WORDS-1] += 1; // p384_n1 = N + 1
p384_n2[BUF_NUM_WORDS-1] += 2; // p384_n2 = N + 2
// repeat forever
while (1)
{
ok = 1;
/* 1. QA = dA * G */
/* 2. QB = dB * G */
ok = ok && test_p384_multiplier(p384_da, p384_gx, p384_gy, p384_qax, p384_qay);
ok = ok && test_p384_multiplier(p384_db, p384_gx, p384_gy, p384_qbx, p384_qby);
/* 3. S = dA * QB */
/* 4. S = dB * QA */
ok = ok && test_p384_multiplier(p384_da, p384_qbx, p384_qby, p384_sx, p384_sy);
ok = ok && test_p384_multiplier(p384_db, p384_qax, p384_qay, p384_sx, p384_sy);
/* 5. O = 0 * QA */
/* 6. O = 0 * QB */
ok = ok && test_p384_multiplier(p384_0, p384_qax, p384_qay, p384_0, p384_0);
ok = ok && test_p384_multiplier(p384_0, p384_qbx, p384_qby, p384_0, p384_0);
/* 7. QA = 1 * QA */
/* 8. QB = 1 * QB */
ok = ok && test_p384_multiplier(p384_1, p384_qax, p384_qay, p384_qax, p384_qay);
ok = ok && test_p384_multiplier(p384_1, p384_qbx, p384_qby, p384_qbx, p384_qby);
/* 9. O = n * G */
ok = ok && test_p384_multiplier(p384_n, p384_gx, p384_gy, p384_0, p384_0);
/* 10. G = (n + 1) * G */
ok = ok && test_p384_multiplier(p384_n1, p384_gx, p384_gy, p384_gx, p384_gy);
/* 11. H = 2 * G */
/* 12. H = (n + 2) * G */
ok = ok && test_p384_multiplier(p384_2, p384_gx, p384_gy, p384_hx, p384_hy);
ok = ok && test_p384_multiplier(p384_n2, p384_gx, p384_gy, p384_hx, p384_hy);
/* 13. QA2 = 2 * QA */
/* 14. QA2 = (n + 2) * QA */
ok = ok && test_p384_multiplier(p384_2, p384_qax, p384_qay, p384_qa2x, p384_qa2y);
ok = ok && test_p384_multiplier(p384_n2, p384_qax, p384_qay, p384_qa2x, p384_qa2y);
/* 15. QB2 = 2 * QB */
/* 16. QB2 = (n + 2) * QB */
ok = ok && test_p384_multiplier(p384_2, p384_qbx, p384_qby, p384_qb2x, p384_qb2y);
ok = ok && test_p384_multiplier(p384_n2, p384_qbx, p384_qby, p384_qb2x, p384_qb2y);
// check
if (!ok) {
led_off(LED_GREEN);
led_on(LED_RED);
}
toggle_yellow_led();
}
}
//
// this routine uses the hardware multiplier to obtain R(rx, ry), which is the
// scalar multiple of the point P(xin, yin), rx and ry are then compared to the values
// xout and yout (correct result known in advance)
//
int test_p384_multiplier(const uint32_t *k,
const uint32_t *xin, const uint32_t *yin,
const uint32_t *xout, const uint32_t *yout)
{
int i, num_cyc;
uint32_t reg_control, reg_status;
uint32_t k_word, qx_word, qy_word;
// fill k
for (i=0; i<BUF_NUM_WORDS; i++) {
k_word = k[i];
fmc_write_32(CORE_ADDR_BUF_K + ((BUF_NUM_WORDS - (i + 1)) * sizeof(uint32_t)), &k_word);
}
// fill xin, yin
for (i=0; i<BUF_NUM_WORDS; i++) {
qx_word = xin[i];
qy_word = yin[i];
fmc_write_32(CORE_ADDR_BUF_XIN + ((BUF_NUM_WORDS - (i + 1)) * sizeof(uint32_t)), &qx_word);
fmc_write_32(CORE_ADDR_BUF_YIN + ((BUF_NUM_WORDS - (i + 1)) * sizeof(uint32_t)), &qy_word);
}
// clear 'next' control bit, then set 'next' control bit again to trigger new operation
reg_control = 0;
fmc_write_32(CORE_ADDR_CONTROL, ®_control);
reg_control = CORE_CONTROL_BIT_NEXT;
fmc_write_32(CORE_ADDR_CONTROL, ®_control);
// wait for 'ready' status bit to be set
num_cyc = 0;
do {
num_cyc++;
fmc_read_32(CORE_ADDR_STATUS, ®_status);
}
while (!(reg_status & CORE_STATUS_BIT_READY));
// read back x and y word-by-word, then compare to the reference values
for (i=0; i<BUF_NUM_WORDS; i++) {
fmc_read_32(CORE_ADDR_BUF_XOUT + (i * sizeof(uint32_t)), &qx_word);
fmc_read_32(CORE_ADDR_BUF_YOUT + (i * sizeof(uint32_t)), &qy_word);
if ((qx_word != xout[BUF_NUM_WORDS - (i + 1)])) return 0;
if ((qy_word != yout[BUF_NUM_WORDS - (i + 1)])) return 0;
}
// everything went just fine
return 1;
}
//
// toggle the yellow led to indicate that we're not stuck somewhere
//
void toggle_yellow_led(void)
{
static int led_state = 0;
led_state = !led_state;
if (led_state) led_on(LED_YELLOW);
else led_off(LED_YELLOW);
}
//
// end of file
//
