//======================================================================
//
// tb_sha512_core.v
// ----------------
// Testbench for the SHA-512 core.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
//------------------------------------------------------------------
// Test module.
//------------------------------------------------------------------
module tb_sha512_core();
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
parameter DEBUG = 1;
parameter CLK_PERIOD = 2;
parameter CLK_HALF_PERIOD = CLK_PERIOD / 2;
parameter MODE_SHA_512_224 = 0;
parameter MODE_SHA_512_256 = 1;
parameter MODE_SHA_384 = 2;
parameter MODE_SHA_512 = 3;
//----------------------------------------------------------------
// Register and Wire declarations.
//----------------------------------------------------------------
reg [31 : 0] cycle_ctr;
reg [31 : 0] error_ctr;
reg [31 : 0] tc_ctr;
reg tb_clk;
reg tb_reset_n;
reg tb_init;
reg tb_next;
reg [1 : 0] tb_mode;
reg [1023 : 0] tb_block;
wire tb_ready;
wire [511 : 0] tb_digest;
wire tb_digest_valid;
//----------------------------------------------------------------
// Device Under Test.
//----------------------------------------------------------------
sha512_core dut(
.clk(tb_clk),
.reset_n(tb_reset_n),
.init(tb_init),
.next(tb_next),
.mode(tb_mode),
.work_factor(1'h0),
.work_factor_num(32'h0),
.block(tb_block),
.ready(tb_ready),
.state_wr_data(32'h0),
.state00_we(1'h0),
.state01_we(1'h0),
.state02_we(1'h0),
.state03_we(1'h0),
.state04_we(1'h0),
.state05_we(1'h0),
.state06_we(1'h0),
.state07_we(1'h0),
.state08_we(1'h0),
.state09_we(1'h0),
.state10_we(1'h0),
.state11_we(1'h0),
.state12_we(1'h0),
.state13_we(1'h0),
.state14_we(1'h0),
.state15_we(1'h0),
.digest(tb_digest),
.digest_valid(tb_digest_valid)
);
//----------------------------------------------------------------
// clk_gen
//
// Always running clock generator process.
//----------------------------------------------------------------
always
begin : clk_gen
#CLK_HALF_PERIOD;
tb_clk = !tb_clk;
end // clk_gen
//----------------------------------------------------------------
// sys_monitor()
//
// An always running process that creates a cycle counter and
// conditionally displays information about the DUT.
//----------------------------------------------------------------
always
begin : sys_monitor
cycle_ctr = cycle_ctr + 1;
#(CLK_PERIOD);
if (DEBUG)
begin
dump_dut_state();
end
end
//----------------------------------------------------------------
// dump_dut_state()
//
// Dump the state of the dut.
//----------------------------------------------------------------
task dump_dut_state;
begin
$display("State of DUT");
$display("------------");
$display("Cycle %010d", cycle_ctr);
$display("Inputs and outputs:");
$display("init = 0x%01x, next = 0x%01x. mode = 0x%01x",
dut.init, dut.next, dut.mode);
$display("ready = 0x%01x, valid = 0x%01x",
dut.ready, dut.digest_valid);
$display("block = 0x%0128x", dut.block);
$display("digest = 0x%064x", dut.digest);
$display("");
$display("Control signals and counter:");
$display("sha512_ctrl_reg = 0x%02x", dut.sha512_ctrl_reg);
$display("digest_init = 0x%01x, digest_update = 0x%01x",
dut.digest_init, dut.digest_update);
$display("state_init = 0x%01x, state_update = 0x%01x",
dut.state_init, dut.state_update);
$display("first_block = 0x%01x, ready_flag = 0x%01x, w_init = 0x%01x",
dut.first_block, dut.ready_flag, dut.w_init);
$display("round_ctr_inc = 0x%01x, round_ctr_rst = 0x%01x, round_ctr_reg = 0x%02x",
dut.round_ctr_inc, dut.round_ctr_rst, dut.round_ctr_reg);
$display("");
$display("State registers:");
$display("a_reg = 0x%08x, b_reg = 0x%08x, c_reg = 0x%08x, d_reg = 0x%08x",
dut.a_reg, dut.b_reg, dut.c_reg, dut.d_reg);
$display("e_reg = 0x%08x, f_reg = 0x%08x, g_reg = 0x%08x, h_reg = 0x%08x",
dut.e_reg, dut.f_reg, dut.g_reg, dut.h_reg);
$display("");
$display("Digest registers:");
$display("H0_reg = 0x%08x, H1_reg = 0x%08x, H2_reg = 0x%08x, H3_reg = 0x%08x",
dut.H0_reg, dut.H1_reg, dut.H2_reg, dut.H3_reg);
$display("H4_reg = 0x%08x, H5_reg = 0x%08x, H6_reg = 0x%08x, H7_reg = 0x%08x",
dut.H4_reg, dut.H5_reg, dut.H6_reg, dut.H7_reg);
$display("");
$display("State update values:");
$display("w = 0x%08x, k = 0x%08x", dut.w_data, dut.k_data);
$display("t1_new = 0x%08x, t2_new = 0x%08x", dut.t1_new, dut.t2_new);
$display("t1_reg = 0x%08x, t2_reg = 0x%08x", dut.t1_reg, dut.t2_reg);
$display("a_new = 0x%08x, b_new = 0x%08x, c_new = 0x%08x, d_new = 0x%08x",
dut.a_new, dut.b_new, dut.c_new, dut.d_new);
$display("e_new = 0x%08x, f_new = 0x%08x, g_new = 0x%08x, h_new = 0x%08x",
dut.e_new, dut.f_new, dut.g_new, dut.h_new);
$display("");
end
endtask // dump_dut_state
//----------------------------------------------------------------
// dump_dut_wmem()
//
// Dump the state of the dut wmem.
//----------------------------------------------------------------
task dump_dut_wmem;
begin
$display("State of DUT WMEM");
$display("-----------------");
$display("W[00] = 0x%016x, W[01] = 0x%016x, W[02] = 0x%016x, W[03] = 0x%016x",
dut.w_mem_inst.w_mem[00], dut.w_mem_inst.w_mem[01],
dut.w_mem_inst.w_mem[02], dut.w_mem_inst.w_mem[03]);
$display("W[04] = 0x%016x, W[05] = 0x%016x, W[06] = 0x%016x, W[07] = 0x%016x",
dut.w_mem_inst.w_mem[04], dut.w_mem_inst.w_mem[05],
dut.w_mem_inst.w_mem[06], dut.w_mem_inst.w_mem[07]);
$display("W[08] = 0x%016x, W[09] = 0x%016x, W[10] = 0x%016x, W[11] = 0x%016x",
dut.w_mem_inst.w_mem[08], dut.w_mem_inst.w_mem[09],
dut.w_mem_inst.w_mem[10], dut.w_mem_inst.w_mem[11]);
$display("W[12] = 0x%016x, W[13] = 0x%016x, W[14] = 0x%016x, W[15] = 0x%016x",
dut.w_mem_inst.w_mem[12], dut.w_mem_inst.w_mem[13],
dut.w_mem_inst.w_mem[14], dut.w_mem_inst.w_mem[15]);
$display("");
end
endtask // dump_dut_wmem
//----------------------------------------------------------------
// reset_dut()
//
// Toggle reset to put the DUT into a well known state.
//----------------------------------------------------------------
task reset_dut;
begin
$display("*** Toggle reset.");
tb_reset_n = 0;
#(2 * CLK_PERIOD);
tb_reset_n = 1;
end
endtask // reset_dut
//----------------------------------------------------------------
// init_sim()
//
// Initialize all counters and testbed functionality as well
// as setting the DUT inputs to defined values.
//----------------------------------------------------------------
task init_sim;
begin
cycle_ctr = 0;
error_ctr = 0;
tc_ctr = 0;
tb_clk = 0;
tb_reset_n = 1;
tb_init = 0;
tb_next = 0;
tb_next = 2'b00;
tb_mode = 2'b00;
tb_block = {1024'h0};
end
endtask // init_dut
//----------------------------------------------------------------
// display_test_result()
//
// Display the accumulated test results.
//----------------------------------------------------------------
task display_test_result;
begin
if (error_ctr == 0)
begin
$display("*** All %02d test cases completed successfully", tc_ctr);
end
else
begin
$display("*** %02d test cases did not complete successfully.", error_ctr);
end
end
endtask // display_test_result
//----------------------------------------------------------------
// wait_ready()
//
// Wait for the ready flag in the dut to be set.
//
// Note: It is the callers responsibility to call the function
// when the dut is actively processing and will in fact at some
// point set the flag.
//----------------------------------------------------------------
task wait_ready;
begin
while (!tb_ready)
begin
#(2 * CLK_PERIOD);
end
end
endtask // wait_ready
//----------------------------------------------------------------
// single_block_test()
//
// Run a test case spanning a single data block.
//----------------------------------------------------------------
task single_block_test(input [7 : 0] tc_number,
input [1 : 0] mode,
input [1023 : 0] block,
input [511 : 0] expected);
reg [511 : 0] mask;
begin
$display("*** TC %0d single block test case started.", tc_number);
tc_ctr = tc_ctr + 1;
tb_block = block;
tb_mode = mode;
tb_init = 1;
#(2 * CLK_PERIOD);
tb_init = 0;
wait_ready();
case (mode)
MODE_SHA_512_224:
begin
mask = {{7{32'hffffffff}}, 288'h0};
end
MODE_SHA_512_256:
begin
mask = {{8{32'hffffffff}}, 256'h0};
end
MODE_SHA_384:
begin
mask = {{12{32'hffffffff}}, 128'h0};
end
MODE_SHA_512:
begin
mask = {16{32'hffffffff}};
end
endcase // case (mode)
if ((tb_digest & mask) == expected)
begin
$display("*** TC %0d successful.", tc_number);
$display("");
end
else
begin
$display("*** ERROR: TC %0d NOT successful.", tc_number);
$display("Expected: 0x%064x", expected);
$display("Got: 0x%064x", tb_digest);
$display("");
error_ctr = error_ctr + 1;
end
end
endtask // single_block_test
//----------------------------------------------------------------
// double_block_test()
//
// Run a test case spanning two data blocks. We check both
// intermediate and final digest.
//----------------------------------------------------------------
task double_block_test(input [7 : 0] tc_number,
input [1 : 0] mode,
input [1023 : 0] block1,
input [1023 : 0] block2,
input [511 : 0] expected1,
input [511 : 0] expected2);
reg [511 : 0] mask;
reg [511 : 0] db_digest1;
reg db_error;
begin
$display("*** TC %0d double block test case started.", tc_number);
db_error = 0;
tc_ctr = tc_ctr + 1;
$display("*** TC %0d first block started.", tc_number);
tb_mode = mode;
tb_block = block1;
tb_init = 1;
#(2 * CLK_PERIOD);
tb_init = 0;
wait_ready();
db_digest1 = tb_digest;
$display("*** TC %0d first block done.", tc_number);
$display("*** TC %0d second block started.", tc_number);
tb_block = block2;
tb_next = 1;
#(2 * CLK_PERIOD);
tb_next = 0;
wait_ready();
$display("*** TC %0d second block done.", tc_number);
if (db_digest1 == expected1)
begin
$display("*** TC %0d first block successful", tc_number);
$display("");
end
else
begin
$display("*** ERROR: TC %0d first block NOT successful", tc_number);
$display("Expected: 0x%064x", expected1);
$display("Got: 0x%064x", db_digest1);
$display("");
db_error = 1;
end
case (mode)
MODE_SHA_512_224:
begin
mask = {{224{1'h1}}, 288'h0};
end
MODE_SHA_512_256:
begin
mask = {{256{1'h1}}, 256'h0};
end
MODE_SHA_384:
begin
mask = {{384{1'h1}}, 128'h0};
end
MODE_SHA_512:
begin
mask = {512{1'h1}};
end
endcase // case (mode)
if ((tb_digest & mask) == expected2)
begin
$display("*** TC %0d second block successful", tc_number);
$display("");
end
else
begin
$display("*** ERROR: TC %0d second block NOT successful", tc_number);
$display("Expected: 0x%064x", expected2);
$display("Got: 0x%064x", tb_digest);
$display("");
db_error = 1;
end
if (db_error)
begin
error_ctr = error_ctr + 1;
end
end
endtask // double_block_test
//----------------------------------------------------------------
// sha512_core_test
// The main test functionality.
//
// Test cases taken from:
// http://csrc.nist.gov/groups/ST/toolkit/documents/Examples/SHA_All.pdf
//----------------------------------------------------------------
initial
begin : sha512_core_test
reg [1024 : 0] single_block;
reg [511 : 0] tc1_expected;
reg [511 : 0] tc2_expected;
reg [511 : 0] tc3_expected;
reg [511 : 0] tc4_expected;
reg [1024 : 0] double_block_one;
reg [1024 : 0] double_block_two;
reg [511 : 0] tc5_expected;
reg [511 : 0] tc6_expected;
reg [511 : 0] tc7_expected;
reg [511 : 0] tc8_expected;
reg [511 : 0] tc9_expected;
reg [511 : 0] tc10_expected;
reg [511 : 0] tc11_expected;
reg [511 : 0] tc12_expected;
$display(" -- Testbench for sha512 core started --");
init_sim();
dump_dut_state();
reset_dut();
dump_dut_state();
// Single block test mesage.
single_block = 1024'h6162638000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000018;
// SHA-512 single block digest and test.
tc1_expected = 512'hDDAF35A193617ABACC417349AE20413112E6FA4E89A97EA20A9EEEE64B55D39A2192992A274FC1A836BA3C23A3FEEBBD454D4423643CE80E2A9AC94FA54CA49F;
single_block_test(8'h01, MODE_SHA_512, single_block, tc1_expected);
/*
// SHA-512_224 single block digest and test.
tc2_expected = {224'h4634270F707B6A54DAAE7530460842E20E37ED265CEEE9A43E8924AA, {9{32'h00000000}}};
single_block_test(8'h02, MODE_SHA_512_224, single_block, tc2_expected);
// SHA-512_256 single block digest and test.
tc3_expected = {256'h53048E2681941EF99B2E29B76B4C7DABE4C2D0C634FC6D46E0E2F13107E7AF23, {8{32'h00000000}}};
single_block_test(8'h03, MODE_SHA_512_256, single_block, tc3_expected);
// SHA-384 single block digest and test.
tc4_expected = {384'hCB00753F45A35E8BB5A03D699AC65007272C32AB0EDED1631A8B605A43FF5BED8086072BA1E7CC2358BAECA134C825A7, {4{32'h00000000}}};
single_block_test(8'h04, MODE_SHA_384, single_block, tc4_expected);
// Two block test message.
double_block_one = 1024'h61626364656667686263646566676869636465666768696A6465666768696A6B65666768696A6B6C666768696A6B6C6D6768696A6B6C6D6E68696A6B6C6D6E6F696A6B6C6D6E6F706A6B6C6D6E6F70716B6C6D6E6F7071726C6D6E6F707172736D6E6F70717273746E6F70717273747580000000000000000000000000000000;
double_block_two = 1024'h0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000380;
// SHA-512 two block digests and test.
tc5_expected = 512'h4319017A2B706E69CD4B05938BAE5E890186BF199F30AA956EF8B71D2F810585D787D6764B20BDA2A26014470973692000EC057F37D14B8E06ADD5B50E671C72;
tc6_expected = 512'h8E959B75DAE313DA8CF4F72814FC143F8F7779C6EB9F7FA17299AEADB6889018501D289E4900F7E4331B99DEC4B5433AC7D329EEB6DD26545E96E55B874BE909;
double_block_test(8'h05, MODE_SHA_512, double_block_one, double_block_two, tc5_expected, tc6_expected);
// SHA-512_224 two block digests and test.
tc7_expected = 512'h9606CB2DB7823CE75FE35E2674A8F9EF1417ED9E89C412BB54EA29664586108625852563EED495096DEBAAE2F4737FD75319224B135486F8E6C0F55E700C35B3;
tc8_expected = {224'h23FEC5BB94D60B23308192640B0C453335D664734FE40E7268674AF9, {9{32'h00000000}}};
double_block_test(8'h06, MODE_SHA_512_224, double_block_one, double_block_two, tc7_expected, tc8_expected);
// SHA-512_256 two block digests and test.
tc9_expected = 512'h8DD99EB081311F8BCBBBC42CC7AFB288E8E9408730419D1E953FF7A2B194048DAE24175483C44C7C809B348E8E88E3ECBF2EA614CEED9C5B51807937F11867E1;
tc10_expected = {256'h3928E184FB8690F840DA3988121D31BE65CB9D3EF83EE6146FEAC861E19B563A, {8{32'h00000000}}};
double_block_test(8'h07, MODE_SHA_512_256, double_block_one, double_block_two, tc9_expected, tc10_expected);
// SHA-384 two block digests and test.
tc11_expected = 512'h2A7F1D895FD58E0BEAAE96D1A673C741015A2173796C1A88F6352CA156ACAFF7C662113E9EBB4D6417B61A85E2CCF0A937EB9A6660FEB5198F2EBE9A81E6A2C5;
tc12_expected = {384'h09330C33F71147E83D192FC782CD1B4753111B173B3B05D22FA08086E3B0F712FCC7C71A557E2DB966C3E9FA91746039, {4{32'h00000000}}};
double_block_test(8'h08, MODE_SHA_384, double_block_one, double_block_two, tc11_expected, tc12_expected);
*/
display_test_result();
$display("*** Simulation done.");
$finish;
end // sha512_core_test
endmodule // tb_sha512_core
//======================================================================
// EOF tb_sha512_core.v
//======================================================================
