diff options
author | Joachim StroĢmbergson <joachim@secworks.se> | 2014-02-19 13:42:31 +0100 |
---|---|---|
committer | Joachim StroĢmbergson <joachim@secworks.se> | 2014-02-19 13:42:31 +0100 |
commit | 665fe30de3c4debf0f9d39c1f69c7bb6623eec3f (patch) | |
tree | 566d1d2c87ba2a16d29aeb675131ae3f57d2968a /src | |
parent | 8ea622defc06b7260401d8559ff513fdf72ae5a4 (diff) |
Adding a Wishbone wrapper for the SHA256 core.
Diffstat (limited to 'src')
-rw-r--r-- | src/rtl/wb_sha256.v | 674 |
1 files changed, 674 insertions, 0 deletions
diff --git a/src/rtl/wb_sha256.v b/src/rtl/wb_sha256.v new file mode 100644 index 0000000..024d0b9 --- /dev/null +++ b/src/rtl/wb_sha256.v @@ -0,0 +1,674 @@ +//====================================================================== +// +// wb_sha256.v +// ----------- +// Wisbone compliant top level wrapper for the SHA-256 hash core. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2014 SUNET +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module wb_sha256( + // Clock and reset. + input wire CLK_I, + input wire RST_I, + + // Control and status. + input wire STB_I, + input wire WE_I, + output wire ACK_O, + output wire ERR_O, + + // Address and data. + input wire [7 : 0] ADR_I, + input wire [31 : 0] DAT_I, + output wire [31 : 0] DAT_O + ); + + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter ADDR_NAME0 = 8'h00; + parameter ADDR_NAME1 = 8'h01; + parameter ADDR_VERSION = 8'h02; + + parameter ADDR_CTRL = 8'h08; + parameter CTRL_INIT_BIT = 0; + parameter CTRL_INIT_VALUE = 8'h01; + parameter CTRL_NEXT_BIT = 1; + parameter CTRL_NEXT_VALUE = 8'h02; + + parameter ADDR_STATUS = 8'h09; + parameter STATUS_READY_BIT = 0; + parameter STATUS_VALID_BIT = 1; + + parameter ADDR_BLOCK0 = 8'h10; + parameter ADDR_BLOCK1 = 8'h11; + parameter ADDR_BLOCK2 = 8'h12; + parameter ADDR_BLOCK3 = 8'h13; + parameter ADDR_BLOCK4 = 8'h14; + parameter ADDR_BLOCK5 = 8'h15; + parameter ADDR_BLOCK6 = 8'h16; + parameter ADDR_BLOCK7 = 8'h17; + parameter ADDR_BLOCK8 = 8'h18; + parameter ADDR_BLOCK9 = 8'h19; + parameter ADDR_BLOCK10 = 8'h1a; + parameter ADDR_BLOCK11 = 8'h1b; + parameter ADDR_BLOCK12 = 8'h1c; + parameter ADDR_BLOCK13 = 8'h1d; + parameter ADDR_BLOCK14 = 8'h1e; + parameter ADDR_BLOCK15 = 8'h1f; + + parameter ADDR_DIGEST0 = 8'h20; + parameter ADDR_DIGEST1 = 8'h21; + parameter ADDR_DIGEST2 = 8'h22; + parameter ADDR_DIGEST3 = 8'h23; + parameter ADDR_DIGEST4 = 8'h24; + parameter ADDR_DIGEST5 = 8'h25; + parameter ADDR_DIGEST6 = 8'h26; + parameter ADDR_DIGEST7 = 8'h27; + + parameter CORE_NAME0 = 32'h73686132; // "sha2" + parameter CORE_NAME1 = 32'h2d323536; // "-256" + parameter CORE_VERSION = 32'h302e3830; // "0.80" + + + //---------------------------------------------------------------- + // Registers including update variables and write enable. + //---------------------------------------------------------------- + reg init_reg; + reg next_reg; + reg ctrl_we; + + reg ready_reg; + + reg [31 : 0] block0_reg; + reg block0_we; + reg [31 : 0] block1_reg; + reg block1_we; + reg [31 : 0] block2_reg; + reg block2_we; + reg [31 : 0] block3_reg; + reg block3_we; + reg [31 : 0] block4_reg; + reg block4_we; + reg [31 : 0] block5_reg; + reg block5_we; + reg [31 : 0] block6_reg; + reg block6_we; + reg [31 : 0] block7_reg; + reg block7_we; + reg [31 : 0] block8_reg; + reg block8_we; + reg [31 : 0] block9_reg; + reg block9_we; + reg [31 : 0] block10_reg; + reg block10_we; + reg [31 : 0] block11_reg; + reg block11_we; + reg [31 : 0] block12_reg; + reg block12_we; + reg [31 : 0] block13_reg; + reg block13_we; + reg [31 : 0] block14_reg; + reg block14_we; + reg [31 : 0] block15_reg; + reg block15_we; + + reg [255 : 0] digest_reg; + + reg digest_valid_reg; + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + wire core_init; + wire core_next; + wire core_ready; + wire [511 : 0] core_block; + wire [255 : 0] core_digest; + wire core_digest_valid; + + reg [31 : 0] tmp_data_out; + reg tmp_ACK_O; + reg tmp_ERR_O; + + wire reset_n; + + + //---------------------------------------------------------------- + // Concurrent connectivity for ports etc. + //---------------------------------------------------------------- + assign core_init = init_reg; + + assign core_next = next_reg; + + assign core_block = {block0_reg, block1_reg, block2_reg, block3_reg, + block4_reg, block5_reg, block6_reg, block7_reg, + block8_reg, block9_reg, block10_reg, block11_reg, + block12_reg, block13_reg, block14_reg, block15_reg}; + + assign DAT_O = tmp_data_out; + + assign ACK_O = tmp_ACK_O; + assign ERR_O = tmp_ERR_O; + + assign reset_n = ~RST_I; + + + //---------------------------------------------------------------- + // core instantiation. + //---------------------------------------------------------------- + sha256_core core( + .clk(CLK_I), + .reset_n(reset_n), + + .init(core_init), + .next(core_next), + + .block(core_block), + + .ready(core_ready), + + .digest(core_digest), + .digest_valid(core_digest_valid) + ); + + + //---------------------------------------------------------------- + // reg_update + // + // Update functionality for all registers in the core. + // All registers are positive edge triggered with synchronous + // active low reset. All registers have write enable. + //---------------------------------------------------------------- + always @ (posedge CLK_I) + begin + if (!reset_n) + begin + init_reg <= 0; + next_reg <= 0; + ready_reg <= 0; + digest_reg <= 256'h0000000000000000000000000000000000000000000000000000000000000000; + digest_valid_reg <= 0; + block0_reg <= 32'h00000000; + block1_reg <= 32'h00000000; + block2_reg <= 32'h00000000; + block3_reg <= 32'h00000000; + block4_reg <= 32'h00000000; + block5_reg <= 32'h00000000; + block6_reg <= 32'h00000000; + block7_reg <= 32'h00000000; + block8_reg <= 32'h00000000; + block9_reg <= 32'h00000000; + block10_reg <= 32'h00000000; + block11_reg <= 32'h00000000; + block12_reg <= 32'h00000000; + block13_reg <= 32'h00000000; + block14_reg <= 32'h00000000; + block15_reg <= 32'h00000000; + end + else + begin + ready_reg <= core_ready; + digest_valid_reg <= core_digest_valid; + + if (ctrl_we) + begin + init_reg <= DAT_I[CTRL_INIT_BIT]; + next_reg <= DAT_I[CTRL_NEXT_BIT]; + end + + if (core_digest_valid) + begin + digest_reg <= core_digest; + end + + if (block0_we) + begin + block0_reg <= DAT_I; + end + + if (block1_we) + begin + block1_reg <= DAT_I; + end + + if (block2_we) + begin + block2_reg <= DAT_I; + end + + if (block3_we) + begin + block3_reg <= DAT_I; + end + + if (block4_we) + begin + block4_reg <= DAT_I; + end + + if (block5_we) + begin + block5_reg <= DAT_I; + end + + if (block6_we) + begin + block6_reg <= DAT_I; + end + + if (block7_we) + begin + block7_reg <= DAT_I; + end + + if (block8_we) + begin + block8_reg <= DAT_I; + end + + if (block9_we) + begin + block9_reg <= DAT_I; + end + + if (block10_we) + begin + block10_reg <= DAT_I; + end + + if (block11_we) + begin + block11_reg <= DAT_I; + end + + if (block12_we) + begin + block12_reg <= DAT_I; + end + + if (block13_we) + begin + block13_reg <= DAT_I; + end + + if (block14_we) + begin + block14_reg <= DAT_I; + end + + if (block15_we) + begin + block15_reg <= DAT_I; + end + + end + end // reg_update + + + //---------------------------------------------------------------- + // addr_decoder + // + // IF SEL_I is enabled will either try to write to or read + // from the internal registers. + //---------------------------------------------------------------- + always @* + begin : addr_decoder + ctrl_we = 0; + block0_we = 0; + block1_we = 0; + block2_we = 0; + block3_we = 0; + block4_we = 0; + block5_we = 0; + block6_we = 0; + block7_we = 0; + block8_we = 0; + block9_we = 0; + block10_we = 0; + block11_we = 0; + block12_we = 0; + block13_we = 0; + block14_we = 0; + block15_we = 0; + tmp_data_out = 32'h00000000; + tmp_ERR_O = 0; + tmp_ACK_O = 0; + + if (STB_I) + begin + if (WE_I) + begin + case (ADR_I) + // Write operations. + ADDR_CTRL: + begin + ctrl_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK0: + begin + block0_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK1: + begin + block1_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK2: + begin + block2_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK3: + begin + block3_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK4: + begin + block4_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK5: + begin + block5_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK6: + begin + block6_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK7: + begin + block7_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK8: + begin + block8_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK9: + begin + block9_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK10: + begin + block10_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK11: + begin + block11_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK12: + begin + block12_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK13: + begin + block13_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK14: + begin + block14_we = 1; + tmp_ACK_O = 1; + end + + ADDR_BLOCK15: + begin + block15_we = 1; + tmp_ACK_O = 1; + end + + default: + begin + tmp_ERR_O = 1; + end + endcase // case (ADR_I) + end // if (WE_I) + + else + begin + case (ADR_I) + // Read operations. + ADDR_NAME0: + begin + tmp_data_out = CORE_NAME0; + tmp_ACK_O = 1; + end + + ADDR_NAME1: + begin + tmp_data_out = CORE_NAME1; + tmp_ACK_O = 1; + end + + ADDR_VERSION: + begin + tmp_data_out = CORE_VERSION; + tmp_ACK_O = 1; + end + + ADDR_CTRL: + begin + tmp_data_out = {28'h0000000, 2'b00, next_reg, init_reg}; + tmp_ACK_O = 1; + end + + ADDR_STATUS: + begin + tmp_data_out = {28'h0000000, 2'b00, digest_valid_reg, ready_reg}; + tmp_ACK_O = 1; + end + + ADDR_BLOCK0: + begin + tmp_data_out = block0_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK1: + begin + tmp_data_out = block1_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK2: + begin + tmp_data_out = block2_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK3: + begin + tmp_data_out = block3_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK4: + begin + tmp_data_out = block4_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK5: + begin + tmp_data_out = block5_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK6: + begin + tmp_data_out = block6_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK7: + begin + tmp_data_out = block7_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK8: + begin + tmp_data_out = block8_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK9: + begin + tmp_data_out = block9_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK10: + begin + tmp_data_out = block10_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK11: + begin + tmp_data_out = block11_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK12: + begin + tmp_data_out = block12_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK13: + begin + tmp_data_out = block13_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK14: + begin + tmp_data_out = block14_reg; + tmp_ACK_O = 1; + end + + ADDR_BLOCK15: + begin + tmp_data_out = block15_reg; + tmp_ACK_O = 1; + end + + ADDR_DIGEST0: + begin + tmp_data_out = digest_reg[255 : 224]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST1: + begin + tmp_data_out = digest_reg[223 : 192]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST2: + begin + tmp_data_out = digest_reg[191 : 160]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST3: + begin + tmp_data_out = digest_reg[159 : 128]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST4: + begin + tmp_data_out = digest_reg[127 : 96]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST5: + begin + tmp_data_out = digest_reg[95 : 64]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST6: + begin + tmp_data_out = digest_reg[63 : 32]; + tmp_ACK_O = 1; + end + + ADDR_DIGEST7: + begin + tmp_data_out = digest_reg[31 : 0]; + tmp_ACK_O = 1; + end + + default: + begin + tmp_ERR_O = 1; + end + endcase // case (ADR_I) + end + end + end // addr_decoder +endmodule // wb_sha256 + +//====================================================================== +// EOF wb_sha256.v +//====================================================================== |