path: root/src/rtl/sha1.v

//======================================================================
//
// sha1.v
// ------
// Top level wrapper for the SHA-1 hash function providing
// a simple memory like interface with 32 bit data access.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, SUNET
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or
// without modification, are permitted provided that the following
// conditions are met:
//
// 1. Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in
//    the documentation and/or other materials provided with the
//    distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module sha1(
            // Clock and reset.
            input wire           clk,
            input wire           reset_n,

            // Control.
            input wire           cs,
            input wire           we,

            // Data ports.
            input wire  [7 : 0]  address,
            input wire  [31 : 0] write_data,
            output wire [31 : 0] read_data,
            output wire          error
           );

  //----------------------------------------------------------------
  // Internal constant and parameter definitions.
  //----------------------------------------------------------------
  parameter ADDR_NAME0       = 8'h00;
  parameter ADDR_NAME1       = 8'h01;
  parameter ADDR_VERSION     = 8'h02;

  parameter ADDR_CTRL        = 8'h08;
  parameter CTRL_INIT_BIT    = 0;
  parameter CTRL_NEXT_BIT    = 1;

  parameter ADDR_STATUS      = 8'h09;
  parameter STATUS_READY_BIT = 0;
  parameter STATUS_VALID_BIT = 1;

  parameter ADDR_BLOCK0    = 8'h10;
  parameter ADDR_BLOCK1    = 8'h11;
  parameter ADDR_BLOCK2    = 8'h12;
  parameter ADDR_BLOCK3    = 8'h13;
  parameter ADDR_BLOCK4    = 8'h14;
  parameter ADDR_BLOCK5    = 8'h15;
  parameter ADDR_BLOCK6    = 8'h16;
  parameter ADDR_BLOCK7    = 8'h17;
  parameter ADDR_BLOCK8    = 8'h18;
  parameter ADDR_BLOCK9    = 8'h19;
  parameter ADDR_BLOCK10   = 8'h1a;
  parameter ADDR_BLOCK11   = 8'h1b;
  parameter ADDR_BLOCK12   = 8'h1c;
  parameter ADDR_BLOCK13   = 8'h1d;
  parameter ADDR_BLOCK14   = 8'h1e;
  parameter ADDR_BLOCK15   = 8'h1f;

  parameter ADDR_DIGEST0   = 8'h20;
  parameter ADDR_DIGEST1   = 8'h21;
  parameter ADDR_DIGEST2   = 8'h22;
  parameter ADDR_DIGEST3   = 8'h23;
  parameter ADDR_DIGEST4   = 8'h24;

  parameter CORE_NAME0     = 32'h73686131; // "sha1"
  parameter CORE_NAME1     = 32'h20202020; // "    "
  parameter CORE_VERSION   = 32'h302e3530; // "0.50"


  //----------------------------------------------------------------
  // Registers including update variables and write enable.
  //----------------------------------------------------------------
  reg init_reg;
  reg init_new;
  reg init_we;
  reg init_set;

  reg next_reg;
  reg next_new;
  reg next_we;
  reg next_set;

  reg ready_reg;

  reg [31 : 0] block0_reg;
  reg          block0_we;
  reg [31 : 0] block1_reg;
  reg          block1_we;
  reg [31 : 0] block2_reg;
  reg          block2_we;
  reg [31 : 0] block3_reg;
  reg          block3_we;
  reg [31 : 0] block4_reg;
  reg          block4_we;
  reg [31 : 0] block5_reg;
  reg          block5_we;
  reg [31 : 0] block6_reg;
  reg          block6_we;
  reg [31 : 0] block7_reg;
  reg          block7_we;
  reg [31 : 0] block8_reg;
  reg          block8_we;
  reg [31 : 0] block9_reg;
  reg          block9_we;
  reg [31 : 0] block10_reg;
  reg          block10_we;
  reg [31 : 0] block11_reg;
  reg          block11_we;
  reg [31 : 0] block12_reg;
  reg          block12_we;
  reg [31 : 0] block13_reg;
  reg          block13_we;
  reg [31 : 0] block14_reg;
  reg          block14_we;
  reg [31 : 0] block15_reg;
  reg          block15_we;

  reg [159 : 0] digest_reg;

  reg digest_valid_reg;


  //----------------------------------------------------------------
  // Wires.
  //----------------------------------------------------------------
  wire           core_init;
  wire           core_next;
  wire           core_ready;
  wire [511 : 0] core_block;
  wire [159 : 0] core_digest;
  wire           core_digest_valid;

  reg [31 : 0]   tmp_read_data;
  reg            tmp_error;


  //----------------------------------------------------------------
  // Concurrent connectivity for ports etc.
  //----------------------------------------------------------------
  assign core_init = init_reg;

  assign core_next = next_reg;

  assign core_block = {block0_reg, block1_reg, block2_reg, block3_reg,
                       block4_reg, block5_reg, block6_reg, block7_reg,
                       block8_reg, block9_reg, block10_reg, block11_reg,
                       block12_reg, block13_reg, block14_reg, block15_reg};

  assign read_data = tmp_read_data;
  assign error    = tmp_error;


  //----------------------------------------------------------------
  // core instantiation.
  //----------------------------------------------------------------
  sha1_core core(
                   .clk(clk),
                   .reset_n(reset_n),

                   .init(core_init),
                   .next(core_next),

                   .block(core_block),

                   .ready(core_ready),

                   .digest(core_digest),
                   .digest_valid(core_digest_valid)
                  );


  //----------------------------------------------------------------
  // reg_update
  // Update functionality for all registers in the core.
  // All registers are positive edge triggered with
  // asynchronous active low reset.
  //----------------------------------------------------------------
  always @ (posedge clk or negedge reset_n)
    begin
      if (!reset_n)
        begin
          init_reg         <= 0;
          next_reg         <= 0;
          ready_reg        <= 0;
          digest_reg       <= 160'h0000000000000000000000000000000000000000;
          digest_valid_reg <= 0;
          block0_reg       <= 32'h00000000;
          block1_reg       <= 32'h00000000;
          block2_reg       <= 32'h00000000;
          block3_reg       <= 32'h00000000;
          block4_reg       <= 32'h00000000;
          block5_reg       <= 32'h00000000;
          block6_reg       <= 32'h00000000;
          block7_reg       <= 32'h00000000;
          block8_reg       <= 32'h00000000;
          block9_reg       <= 32'h00000000;
          block10_reg      <= 32'h00000000;
          block11_reg      <= 32'h00000000;
          block12_reg      <= 32'h00000000;
          block13_reg      <= 32'h00000000;
          block14_reg      <= 32'h00000000;
          block15_reg      <= 32'h00000000;
        end
      else
        begin
          ready_reg        <= core_ready;
          digest_valid_reg <= core_digest_valid;

          if (init_we)
            begin
              init_reg <= init_new;
            end

          if (next_we)
            begin
              next_reg <= next_new;
            end

          if (core_digest_valid)
            begin
              digest_reg <= core_digest;
            end

          if (block0_we)
            begin
              block0_reg <= write_data;
            end

          if (block1_we)
            begin
              block1_reg <= write_data;
            end

          if (block2_we)
            begin
              block2_reg <= write_data;
            end

          if (block3_we)
            begin
              block3_reg <= write_data;
            end

          if (block4_we)
            begin
              block4_reg <= write_data;
            end

          if (block5_we)
            begin
              block5_reg <= write_data;
            end

          if (block6_we)
            begin
              block6_reg <= write_data;
            end

          if (block7_we)
            begin
              block7_reg <= write_data;
            end

          if (block8_we)
            begin
              block8_reg <= write_data;
            end

          if (block9_we)
            begin
              block9_reg <= write_data;
            end

          if (block10_we)
            begin
              block10_reg <= write_data;
            end

          if (block11_we)
            begin
              block11_reg <= write_data;
            end

          if (block12_we)
            begin
              block12_reg <= write_data;
            end

          if (block13_we)
            begin
              block13_reg <= write_data;
            end

          if (block14_we)
            begin
              block14_reg <= write_data;
            end

          if (block15_we)
            begin
              block15_reg <= write_data;
            end

        end
    end // reg_update


  //----------------------------------------------------------------
  // flag_reset
  //
  // Logic to reset init and next flags that has been set.
  //----------------------------------------------------------------
  always @*
    begin : flag_reset
      init_new = 0;
      init_we  = 0;
      next_new = 0;
      next_we  = 0;

      if (init_set)
        begin
          init_new = 1;
          init_we  = 1;
        end
      else if (init_reg)
        begin
          init_new = 0;
          init_we  = 1;
        end

      if (next_set)
        begin
          next_new = 1;
          next_we  = 1;
        end
      else if (next_reg)
        begin
          next_new = 0;
          next_we  = 1;
        end
    end


  //----------------------------------------------------------------
  // api
  //
  // The interface command decoding logic.
  //----------------------------------------------------------------
  always @*
    begin : api
      init_set      = 0;
      next_set      = 0;
      block0_we     = 0;
      block1_we     = 0;
      block2_we     = 0;
      block3_we     = 0;
      block4_we     = 0;
      block5_we     = 0;
      block6_we     = 0;
      block7_we     = 0;
      block8_we     = 0;
      block9_we     = 0;
      block10_we    = 0;
      block11_we    = 0;
      block12_we    = 0;
      block13_we    = 0;
      block14_we    = 0;
      block15_we    = 0;
      tmp_read_data = 32'h00000000;
      tmp_error     = 0;

      if (cs)
        begin
          if (we)
            begin
              case (address)
                // Write operations.
                ADDR_CTRL:
                  begin
                    init_set = write_data[CTRL_INIT_BIT];
                    next_set = write_data[CTRL_NEXT_BIT];
                  end

                ADDR_BLOCK0:
                  begin
                    block0_we = 1;
                   end

                ADDR_BLOCK1:
                  begin
                    block1_we = 1;
                  end

                ADDR_BLOCK2:
                  begin
                    block2_we = 1;
                  end

                ADDR_BLOCK3:
                  begin
                    block3_we = 1;
                  end

                ADDR_BLOCK4:
                  begin
                    block4_we = 1;
                  end

                ADDR_BLOCK5:
                  begin
                    block5_we = 1;
                  end

                ADDR_BLOCK6:
                  begin
                    block6_we = 1;
                  end

                ADDR_BLOCK7:
                  begin
                    block7_we = 1;
                  end

                ADDR_BLOCK8:
                  begin
                    block8_we = 1;
                  end

                ADDR_BLOCK9:
                  begin
                    block9_we = 1;
                  end

                ADDR_BLOCK10:
                  begin
                    block10_we = 1;
                  end

                ADDR_BLOCK11:
                  begin
                    block11_we = 1;
                  end

                ADDR_BLOCK12:
                  begin
                    block12_we = 1;
                  end

                ADDR_BLOCK13:
                  begin
                    block13_we = 1;
                  end

                ADDR_BLOCK14:
                  begin
                    block14_we = 1;
                  end

                ADDR_BLOCK15:
                  begin
                    block15_we = 1;
                  end

                default:
                  begin
                    tmp_error = 1;
                  end
              endcase // case (addr)
            end // if (write_read)

          else
            begin
              case (address)
                // Read operations.
                ADDR_NAME0:
                  begin
                    tmp_read_data = CORE_NAME0;
                  end

                ADDR_NAME1:
                  begin
                    tmp_read_data = CORE_NAME1;
                  end

                ADDR_VERSION:
                  begin
                    tmp_read_data = CORE_VERSION;
                  end

                ADDR_CTRL:
                  begin
                    tmp_read_data = {28'h0000000, 2'b00, next_reg, init_reg};
                  end

                ADDR_STATUS:
                  begin
                    tmp_read_data = {28'h0000000, 2'b00, digest_valid_reg, ready_reg};
                  end

                ADDR_BLOCK0:
                  begin
                    tmp_read_data = block0_reg;
                  end

                ADDR_BLOCK1:
                  begin
                    tmp_read_data = block1_reg;
                  end

                ADDR_BLOCK2:
                  begin
                    tmp_read_data = block2_reg;
                  end

                ADDR_BLOCK3:
                  begin
                    tmp_read_data = block3_reg;
                  end

                ADDR_BLOCK4:
                  begin
                    tmp_read_data = block4_reg;
                  end

                ADDR_BLOCK5:
                  begin
                    tmp_read_data = block5_reg;
                  end

                ADDR_BLOCK6:
                  begin
                    tmp_read_data = block6_reg;
                  end

                ADDR_BLOCK7:
                  begin
                    tmp_read_data = block7_reg;
                  end

                ADDR_BLOCK8:
                  begin
                    tmp_read_data = block8_reg;
                  end

                ADDR_BLOCK9:
                  begin
                    tmp_read_data = block9_reg;
                  end

                ADDR_BLOCK10:
                  begin
                    tmp_read_data = block10_reg;
                  end

                ADDR_BLOCK11:
                  begin
                    tmp_read_data = block11_reg;
                  end

                ADDR_BLOCK12:
                  begin
                    tmp_read_data = block12_reg;
                  end

                ADDR_BLOCK13:
                  begin
                    tmp_read_data = block13_reg;
                  end

                ADDR_BLOCK14:
                  begin
                    tmp_read_data = block14_reg;
                  end

                ADDR_BLOCK15:
                  begin
                    tmp_read_data = block15_reg;
                  end

                ADDR_DIGEST0:
                  begin
                    tmp_read_data = digest_reg[159 : 128];
                  end

                ADDR_DIGEST1:
                  begin
                    tmp_read_data = digest_reg[127 :  96];
                  end

                ADDR_DIGEST2:
                  begin
                    tmp_read_data = digest_reg[95  :  64];
                  end

                ADDR_DIGEST3:
                  begin
                    tmp_read_data = digest_reg[63  :  32];
                  end

                ADDR_DIGEST4:
                  begin
                    tmp_read_data = digest_reg[31  :   0];
                  end

                default:
                  begin
                    tmp_error = 1;
                  end
              endcase // case (addr)
            end
        end
    end // addr_decoder
endmodule // sha1

//======================================================================
// EOF sha1.v
//======================================================================