path: root/src/rtl/sha1.v

//======================================================================
//
// sha1.v
// ------
// Top level wrapper for the SHA-1 hash function providing
// a simple memory like interface with 32 bit data access.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module sha1(
            // Clock and reset.
            input wire           clk,
            input wire           reset_n,

            // Control.
            input wire           cs,
            input wire           we,

            // Data ports.
            input wire  [7 : 0]  address,
            input wire  [31 : 0] write_data,
            output wire [31 : 0] read_data,
            output wire          error
           );

  //----------------------------------------------------------------
  // Internal constant and parameter definitions.
  //----------------------------------------------------------------
  localparam ADDR_NAME0       = 8'h00;
  localparam ADDR_NAME1       = 8'h01;
  localparam ADDR_VERSION     = 8'h02;

  localparam ADDR_CTRL        = 8'h08;
  localparam CTRL_INIT_BIT    = 0;
  localparam CTRL_NEXT_BIT    = 1;

  localparam ADDR_STATUS      = 8'h09;
  localparam STATUS_READY_BIT = 0;
  localparam STATUS_VALID_BIT = 1;

  localparam ADDR_BLOCK0    = 8'h10;
  localparam ADDR_BLOCK15   = 8'h1f;

  localparam ADDR_DIGEST0   = 8'h20;
  localparam ADDR_DIGEST4   = 8'h24;

  localparam CORE_NAME0     = 32'h73686131; // "sha1"
  localparam CORE_NAME1     = 32'h20202020; // "    "
  localparam CORE_VERSION   = 32'h302e3630; // "0.60"


  //----------------------------------------------------------------
  // Registers including update variables and write enable.
  //----------------------------------------------------------------
  reg init_reg;
  reg init_new;

  reg next_reg;
  reg next_new;

  reg ready_reg;

  reg [31 : 0] block_reg [0 : 15];
  reg          block_we;

  reg [159 : 0] digest_reg;

  reg digest_valid_reg;


  //----------------------------------------------------------------
  // Wires.
  //----------------------------------------------------------------
  wire           core_ready;
  wire [511 : 0] core_block;
  wire [159 : 0] core_digest;
  wire           core_digest_valid;

  reg [31 : 0]   tmp_read_data;
  reg            tmp_error;


  //----------------------------------------------------------------
  // Concurrent connectivity for ports etc.
  //----------------------------------------------------------------
  assign core_block = {block_reg[00], block_reg[01], block_reg[02], block_reg[03],
                       block_reg[04], block_reg[05], block_reg[06], block_reg[07],
                       block_reg[08], block_reg[09], block_reg[10], block_reg[11],
                       block_reg[12], block_reg[13], block_reg[14], block_reg[15]};

  assign read_data = tmp_read_data;
  assign error     = tmp_error;


  //----------------------------------------------------------------
  // core instantiation.
  //----------------------------------------------------------------
  sha1_core core(
                 .clk(clk),
                 .reset_n(reset_n),

                 .init(init_reg),
                 .next(next_reg),

                 .block(core_block),

                 .ready(core_ready),

                 .digest(core_digest),
                 .digest_valid(core_digest_valid)
                );


  //----------------------------------------------------------------
  // reg_update
  // Update functionality for all registers in the core.
  // All registers are positive edge triggered with
  // asynchronous active low reset.
  //----------------------------------------------------------------
  always @ (posedge clk or negedge reset_n)
    begin : reg_update
      integer i;

      if (!reset_n)
        begin
          init_reg         <= 1'h0;
          next_reg         <= 1'h0;
          ready_reg        <= 1'h0;
          digest_reg       <= 160'h0;
          digest_valid_reg <= 1'h0;

          for (i = 0 ; i < 16 ; i = i + 1)
            block_reg[i] <= 32'h0;
        end
      else
        begin
          ready_reg        <= core_ready;
          digest_valid_reg <= core_digest_valid;
          init_reg         <= init_new;
          next_reg         <= next_new;

          if (block_we)
            block_reg[address[3 : 0]] <= write_data;

          if (core_digest_valid)
            digest_reg <= core_digest;
        end
    end // reg_update

  //----------------------------------------------------------------
  // api
  //
  // The interface command decoding logic.
  //----------------------------------------------------------------
  always @*
    begin : api
      init_new      = 0;
      next_new      = 0;
      block_we      = 0;
      tmp_read_data = 32'h0;
      tmp_error     = 0;

      if (cs)
        begin
          if (we)
            begin
              if (core_ready)
                begin
                  if ((address >= ADDR_BLOCK0) && (address <= ADDR_BLOCK15))
                    block_we = 1;

                  if (address == ADDR_CTRL)
                    begin
                      init_new = write_data[CTRL_INIT_BIT];
                      next_new = write_data[CTRL_NEXT_BIT];
                    end
                end
            end // if (write_read)
          else
            begin
              if ((address >= ADDR_BLOCK0) && (address <= ADDR_BLOCK15))
                tmp_read_data = block_reg[address[3 : 0]];

              if ((address >= ADDR_DIGEST0) && (address <= ADDR_DIGEST4))
                if (core_ready)
                  tmp_read_data = digest_reg[(4 - (address - ADDR_DIGEST0)) * 32 +: 32];

              case (address)
                // Read operations.
                ADDR_NAME0:
                  tmp_read_data = CORE_NAME0;

                ADDR_NAME1:
                  tmp_read_data = CORE_NAME1;

                ADDR_VERSION:
                  tmp_read_data = CORE_VERSION;

                ADDR_CTRL:
                  tmp_read_data = {30'h0, next_reg, init_reg};

                ADDR_STATUS:
                  tmp_read_data = {30'h0, digest_valid_reg, ready_reg};

                default:
                  begin
                    tmp_error = 1;
                  end
              endcase // case (addr)
            end
        end
    end // addr_decoder
endmodule // sha1

//======================================================================
// EOF sha1.v
//======================================================================