aboutsummaryrefslogtreecommitdiff
path: root/src/rtl
diff options
context:
space:
mode:
Diffstat (limited to 'src/rtl')
-rw-r--r--src/rtl/uart.v119
1 files changed, 93 insertions, 26 deletions
diff --git a/src/rtl/uart.v b/src/rtl/uart.v
index d5a5a86..40a3f69 100644
--- a/src/rtl/uart.v
+++ b/src/rtl/uart.v
@@ -18,7 +18,7 @@
//
//
// Author: Joachim Strombergson
-// Copyright (c) 2014 SUNET
+// Copyright (c) 2014, SUNET
//
// Redistribution and use in source and binary forms, with or
// without modification, are permitted provided that the following
@@ -68,7 +68,7 @@ module uart(
// API interface.
input wire cs,
input wire we,
- input wire [3 : 0] address,
+ input wire [7 : 0] address,
input wire [31 : 0] write_data,
output wire [31 : 0] read_data,
output wire error,
@@ -82,34 +82,46 @@ module uart(
// Internal constant and parameter definitions.
//----------------------------------------------------------------
// API addresses.
- parameter ADDR_CORE_NAME0 = 4'h0;
- parameter ADDR_CORE_NAME1 = 4'h1;
- parameter ADDR_CORE_TYPE = 4'h2;
- parameter ADDR_CORE_VERSION = 4'h3;
+ parameter ADDR_CORE_NAME0 = 8'h00;
+ parameter ADDR_CORE_NAME1 = 8'h01;
+ parameter ADDR_CORE_TYPE = 8'h02;
+ parameter ADDR_CORE_VERSION = 8'h03;
+ parameter ADDR_BIT_RATE = 8'h10;
+ parameter ADDR_DATA_BITS = 8'h11;
+ parameter ADDR_STOP_BITS = 8'h12;
+
// Core ID constants.
parameter CORE_NAME0 = 32'h75617274; // "uart"
parameter CORE_NAME1 = 32'h20202020; // " "
parameter CORE_TYPE = 32'h20202031; // " 1"
parameter CORE_VERSION = 32'h302e3031; // "0.01"
- // The default clock rate is based on target clock frequency
+ // The default bit rate is based on target clock frequency
// divided by the bit rate times in order to hit the
// center of the bits. I.e.
- // Clock: 50 MHz
- // Bitrate: 19200 bps
+ // Clock: 50 MHz, 9600 bps
// Divisor = 50*10E6 / 9600 = 5208
- parameter DEFAULT_CLK_RATE = 16'd5208;
- parameter DEFAULT_HALF_CLK_RATE = DEFAULT_CLK_RATE / 2;
-
+ parameter DEFAULT_BIT_RATE = 16'd5208;
parameter DEFAULT_DATA_BITS = 4'h8;
- parameter DEFAULT_STOP_BITS = 2'h2;
+ parameter DEFAULT_STOP_BITS = 2'h1;
//----------------------------------------------------------------
// Registers including update variables and write enable.
//----------------------------------------------------------------
+ reg [15 : 0] bit_rate_reg;
+ reg [15 : 0] bit_rate_new;
+ reg bit_rate_we;
+ reg [3 : 0] data_bits_reg;
+ reg [3 : 0] data_bits_new;
+ reg data_bits_we;
+
+ reg [1 : 0] stop_bits_reg;
+ reg [1 : 0] stop_bits_new;
+ reg stop_bits_we;
+
//----------------------------------------------------------------
// Wires.
@@ -117,19 +129,19 @@ module uart(
wire [15 : 0] bit_rate;
wire [1 : 0] stop_bits;
- wire core_rxd;
- wire core_txd;
+ wire core_rxd;
+ wire core_txd;
- wire core_rxd_syn;
- wire [7 : 0] core_rxd_data;
- wire core_rxd_ack;
+ wire core_rxd_syn;
+ wire [7 : 0] core_rxd_data;
+ wire core_rxd_ack;
- wire core_txd_syn;
- wire [7 : 0] core_txd_data;
- wire core_txd_ack;
+ wire core_txd_syn;
+ wire [7 : 0] core_txd_data;
+ wire core_txd_ack;
- reg [31 : 0] tmp_read_data;
- reg tmp_error;
+ reg [31 : 0] tmp_read_data;
+ reg tmp_error;
//----------------------------------------------------------------
@@ -162,8 +174,9 @@ module uart(
.reset_n(reset_n),
// Configuration parameters
- .bit_rate(bit_rate),
- .stop_bits(stop_bits),
+ .bit_rate(bit_rate_reg),
+ .data_bits(data_bits_reg),
+ .stop_bits(stop_bits_reg),
// External data interface
.rxd(core_rxd),
@@ -192,10 +205,26 @@ module uart(
begin: reg_update
if (!reset_n)
begin
-
+ bit_rate_reg <= DEFAULT_BIT_RATE;
+ data_bits_reg <= DEFAULT_DATA_BITS;
+ stop_bits_reg <= DEFAULT_STOP_BITS;
end
else
begin
+ if (bit_rate_we)
+ begin
+ bit_rate_reg <= bit_rate_new;
+ end
+
+ if (data_bits_we)
+ begin
+ data_bits_reg <= data_bits_new;
+ end
+
+ if (stop_bits_we)
+ begin
+ stop_bits_reg <= stop_bits_new;
+ end
end
end // reg_update
@@ -210,6 +239,12 @@ module uart(
always @*
begin: api
// Default assignments.
+ bit_rate_new = 16'h0000;
+ bit_rate_we = 0;
+ data_bits_new = 4'h0;
+ data_bits_we = 0;
+ stop_bits_new = 2'b00;
+ stop_bits_we = 0;
tmp_read_data = 32'h00000000;
tmp_error = 0;
@@ -219,6 +254,23 @@ module uart(
begin
// Write operations.
case (address)
+ ADDR_BIT_RATE:
+ begin
+ bit_rate_new = write_data[15 : 0];
+ bit_rate_we = 1;
+ end
+
+ ADDR_DATA_BITS:
+ begin
+ data_bits_new = write_data[3 : 0];
+ data_bits_we = 1;
+ end
+
+ ADDR_STOP_BITS:
+ begin
+ stop_bits_new = write_data[1 : 0];
+ stop_bits_we = 1;
+ end
default:
begin
@@ -250,6 +302,21 @@ module uart(
tmp_read_data = CORE_VERSION;
end
+ ADDR_BIT_RATE:
+ begin
+ tmp_read_data = {16'h0000, bit_rate_reg};
+ end
+
+ ADDR_DATA_BITS:
+ begin
+ tmp_read_data = {28'h0000000, data_bits_reg};
+ end
+
+ ADDR_STOP_BITS:
+ begin
+ tmp_read_data = {30'h0000000, stop_bits_reg};
+ end
+
default:
begin
tmp_error = 1;