diff options
Diffstat (limited to 'src/tb/tb_coretest.v')
| -rw-r--r-- | src/tb/tb_coretest.v | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/src/tb/tb_coretest.v b/src/tb/tb_coretest.v new file mode 100644 index 0000000..415a9e6 --- /dev/null +++ b/src/tb/tb_coretest.v @@ -0,0 +1,362 @@ +//====================================================================== +// +// tb_coretest.v +// ------------- +// Testbench for coretest. Generates commands and observes responses. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2014 SUNET +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +//------------------------------------------------------------------ +// Simulator directives. +//------------------------------------------------------------------ +`timescale 1ns/10ps + + +module tb_coretest(); + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter DEBUG = 0; + parameter VERBOSE = 1; + + parameter CLK_HALF_PERIOD = 1; + parameter CLK_PERIOD = CLK_HALF_PERIOD * 2; + + + parameter SOF = 8'h55; + parameter EOF = 8'haa; + parameter OP_RESET = 8'h01; + parameter OP_READ = 8'h10; + parameter OP_WRITE = 8'h11; + + + //---------------------------------------------------------------- + // Register and Wire declarations. + //---------------------------------------------------------------- + reg [31 : 0] cycle_ctr; + reg [31 : 0] error_ctr; + reg [31 : 0] tc_ctr; + + reg tb_clk; + reg tb_reset_n; + + reg tb_rx_syn; + reg [7 : 0] tb_rx_data; + wire tb_rx_ack; + wire tb_tx_syn; + wire [7 : 0] tb_tx_data; + reg tb_tx_ack; + + wire tb_core_reset_; + wire tb_core_cs; + wire tb_core_we; + wire [15 : 0] tb_core_address; + wire [31 : 0] tb_core_write_data; + reg [31 : 0] tb_core_read_data; + reg tb_core_error; + + reg [7 : 0] received_tx_data; + + + + //---------------------------------------------------------------- + // Device Under Test. + //---------------------------------------------------------------- + coretest dut( + .clk(tb_clk), + .reset_n(tb_reset_n), + + // Interface to communication core + .rx_syn(tb_rx_syn), + .rx_data(tb_rx_data), + .rx_ack(tb_rx_ack), + + .tx_syn(tb_tx_syn), + .tx_data(tb_tx_data), + .tx_ack(tb_tx_ack), + + // Interface to the core being tested. + .core_reset_n(tb_core_reset_n), + .core_cs(tb_core_cs), + .core_we(tb_core_we), + .core_address(tb_core_address), + .core_write_data(tb_core_write_data), + .core_read_data(tb_core_read_data), + .core_error(tb_core_error) + ); + + + //---------------------------------------------------------------- + // Concurrent assignments. + //---------------------------------------------------------------- + + + //---------------------------------------------------------------- + // clk_gen + // + // Clock generator process. + //---------------------------------------------------------------- + always + begin : clk_gen + #CLK_HALF_PERIOD tb_clk = !tb_clk; + end // clk_gen + + + //---------------------------------------------------------------- + // sys_monitor + //---------------------------------------------------------------- + always + begin : sys_monitor + #(CLK_PERIOD); + if (DEBUG) + begin + $display(""); + end + + if (VERBOSE) + begin + $display("cycle: 0x%016x", cycle_ctr); + end + cycle_ctr = cycle_ctr + 1; + end + + + //---------------------------------------------------------------- + // dump_dut_state() + // + // Dump the state of the dut when needed. + //---------------------------------------------------------------- + task dump_dut_state(); + begin + $display("State of DUT"); + $display("------------"); + $display("Inputs and outputs:"); + $display("rx_syn = 0x%01x, rx_data = 0x%02x, rx_ack = 0x%01x", + dut.rx_syn, dut.rx_data, dut.rx_ack); + $display("tx_syn = 0x%01x, tx_data = 0x%02x, tx_ack = 0x%01x", + dut.tx_syn, dut.tx_data, dut.tx_ack); + $display("cs = 0x%01x, we = 0x%01x, address = 0x%04x, write_data = 0x%08x, read_data = 0x%08x, error = 0x%01x", + dut.core_cs, dut.core_we, dut.core_address, dut.core_write_data, dut.core_read_data, dut.core_error); + $display(""); + + $display("Control signals and FSM state:"); + $display("test_engine_reg = 0x%02x, cmd_reg = 0x%02x, rx_buffer_ptr = 0x%02x, tx_buffer_ptr = 0x%02x", + dut.test_engine_reg, dut.cmd_reg, dut.rx_buffer_ptr_reg, dut.tx_buffer_ptr_reg); + $display(""); + end + endtask // dump_dut_state + + + //---------------------------------------------------------------- + // reset_dut() + //---------------------------------------------------------------- + task reset_dut(); + begin + $display("*** Toggle reset."); + tb_reset_n = 0; + #(2 * CLK_PERIOD); + tb_reset_n = 1; + end + endtask // reset_dut + + + //---------------------------------------------------------------- + // init_sim() + // + // Initialize all counters and testbed functionality as well + // as setting the DUT inputs to defined values. + //---------------------------------------------------------------- + task init_sim(); + begin + cycle_ctr = 0; + error_ctr = 0; + tc_ctr = 0; + + tb_clk = 0; + tb_reset_n = 1; + tb_rx_syn = 0; + tb_rx_data = 8'h00; + tb_tx_ack = 1; + tb_core_read_data = 32'h00000000; + tb_core_error = 0; + end + endtask // init_sim + + + //---------------------------------------------------------------- + // send_byte + // + // Send a byte of data to the DUT. + //---------------------------------------------------------------- + task send_byte(input [7 : 0] data); + integer i; + begin + $display("*** Sending byte 0x%02x to the dut.", data); + + if (VERBOSE) + begin + $display("*** Setting RX data and RX SYN."); + end + tb_rx_data = data; + tb_rx_syn = 1; + + while (!tb_rx_ack) + begin + #CLK_PERIOD; + if (VERBOSE) + begin + $display("*** Waiting for RX ACK."); + end + end + + if (VERBOSE) + begin + $display("*** RX ACK seen. Dropping SYN."); + end + tb_rx_syn = 0; + + #(2 * CLK_PERIOD); + end + endtask // send_byte + + + //---------------------------------------------------------------- + // send_reset_command + // + // Generates a reset command to the dut. + //---------------------------------------------------------------- + task send_reset_command(); + begin + $display("*** Sending reset command."); + send_byte(SOF); + send_byte(OP_RESET); + send_byte(EOF); + $display("*** Sending reset command done."); + end + endtask // send_write_command + + + //---------------------------------------------------------------- + // send_write_command + // + // Generates a read command to the dut. + //---------------------------------------------------------------- + task send_read_command(input [15 : 0] addr); + begin + $display("*** Sending read command: address 0x%04x.", addr); + send_byte(SOF); + send_byte(OP_READ); + send_byte(addr[15 : 8]); + send_byte(addr[7 : 0]); + send_byte(EOF); + $display("*** Sending read command done."); + end + endtask // send_write_command + + + //---------------------------------------------------------------- + // send_write_command + // + // Generates a write command to the dut. + //---------------------------------------------------------------- + task send_write_command(input [15 : 0] addr, input [31 : 0] data); + begin + $display("*** Sending write command: address 0x%04x = 0x%08x.", addr, data); + send_byte(SOF); + send_byte(OP_WRITE); + send_byte(addr[15 : 8]); + send_byte(addr[7 : 0]); + send_byte(data[31 : 24]); + send_byte(data[23 : 16]); + send_byte(data[15 : 8]); + send_byte(data[7 : 0]); + send_byte(EOF); + $display("*** Sending write command done."); + end + endtask // send_write_command + + + //---------------------------------------------------------------- + // display_test_result() + // + // Display the accumulated test results. + //---------------------------------------------------------------- + task display_test_result(); + begin + if (error_ctr == 0) + begin + $display("*** All %02d test cases completed successfully", tc_ctr); + end + else + begin + $display("*** %02d test cases did not complete successfully.", error_ctr); + end + end + endtask // display_test_result + + + //---------------------------------------------------------------- + // coretest_test + // The main test functionality. + //---------------------------------------------------------------- + initial + begin : coretest_test + $display(" -- Testbench for coretest started --"); + + init_sim(); + dump_dut_state(); + reset_dut(); + dump_dut_state(); + + #(64 * CLK_PERIOD); + + send_reset_command(); +// dump_dut_state(); + + send_read_command(16'h0123); +// dump_dut_state(); + + send_write_command(16'h4224, 32'h1337beef); +// dump_dut_state(); + + #(64 * CLK_PERIOD); + + display_test_result(); + $display("*** Simulation done."); + $finish; + end // coretest_test +endmodule // tb_coretest + +//====================================================================== +// EOF tb_coretest.v +//====================================================================== |