From 23bb68fe7e9cc8af176ff60b56e8a51a70f05a89 Mon Sep 17 00:00:00 2001 From: Rob Austein Date: Sun, 14 Feb 2021 01:35:10 +0000 Subject: Now generating pages directly from sqlite3 --- raw-wiki-dump/GettingStartedNovena.trac | 145 -------------------------------- 1 file changed, 145 deletions(-) delete mode 100644 raw-wiki-dump/GettingStartedNovena.trac (limited to 'raw-wiki-dump/GettingStartedNovena.trac') diff --git a/raw-wiki-dump/GettingStartedNovena.trac b/raw-wiki-dump/GettingStartedNovena.trac deleted file mode 100644 index 1de2cef..0000000 --- a/raw-wiki-dump/GettingStartedNovena.trac +++ /dev/null @@ -1,145 +0,0 @@ -[[PageOutline]] - -= Getting Started on the Novena = - -== The Novena Board == - -[[Image(http://bunniefoo.com/novena/pvt1_release/novena_pvt1e_top_sm.jpg)]] - -[http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena] is an open hardware and F/OSS-friendly computing platform. It is a small single-board Linux PC, with a Freescale i.MX6 (ARM -Cortex-A9) CPU and a Xilinx Spartan-6 LX45 FPGA. - -It is available in limited quantities through [https://www.crowdsupply.com/sutajio-kosagi/novena crowd supply]. - -=== Setting up the Novena === - -The Novena PVT-2 requires some initial setup. You will need to attach a USB keyboard and HDMI monitor. - -Once this is done, most of us prefer to run it headless, and ssh in. - -You may also want to bring the packages up to date: - -{{{ -$ sudo apt-get update -$ sudo apt-get upgrade -}}} - -== The Avalanche Noise Board == - -[[Image(rev03-on-novena.jpg, 40%)]] - -The avalanche noise board is a Novena daughter board that contains a zener-diode noise circuit that can be read directly by the FPGA. - -''(More information from FT: block diagram, schematics, ...)'' - -It is available in limited quantities directly from Fredrik Thulin, and will be distributed at the PrahaWorkshop. - -== Binary Packages == - -Cryptech maintains an {{{apt}}} repository, with two binary packages for the Novena: -* a bitstream, to be configured into the FPGA -* software, to run on the CPU - -=== How to get them === - -All commands are run on the Novena. - -1. First, get the hactrn CA certificate: - -{{{ -$ wget http://www.hactrn.net/cacert.asc -}}} - -Get the key used to sign the CA certificate. - -{{{ -$ gpg --recv-keys 2DC6FF82 -}}} - -Validate the CA certificate - -{{{ -$ gpg cacert.asc -}}} - -Install the CA certficiate. - -{{{ -$ sudo mkdir /usr/share/ca-certificates/hactrn.org -$ sudo mv cacert /usr/share/ca-certificates/hactrn.org/cacert.crt -$ sudo dpkg-reconfigure ca-certificates -}}} - -2. Get the repository key. - -{{{ -$ wget https://apt.cryptech.is/novena/apt-gpg-key.asc -}}} - -Validate the key. - -{{{ -$ id=37A8E93F5D7E7B9A -$ gpg --recv-key $id -$ gpg --check-sig $id -$ gpg --export $id | sudo apt-key add - -}}} - -See the apt-key(8) manual page for more information about the APT key database, including how to remove keys you don't want anymore. - -Install the key. - -{{{ -$ sudo apt-key add apt-gpg-key.asc -}}} - -3. Get the packages - -Configure apt to use the repository. - -{{{ -$ sudo wget -q -O /etc/apt/sources.list.d/novena.list http://apt.cryptech.is/novena/sources.list -}}} - -Update the package index file. - -{{{ -$ sudo apt-get update -}}} - -Get the cryptech meta-package. - -{{{ -$ sudo apt-get install cryptech-novena -}}} - -This installs the {{{cryptech-novena-rtl}}} and {{{cryptech-novena-sw}}} packages. - -The {{{cryptech-novena-rtl}}} package includes an {{{init.d}}} script that configures the FPGA on system startup. This script should run automatically as part of the install process. - -=== Updating the packages === - -Once you've performed the steps above you should be able to upgrade to newer -version of the code using the normal APT upgrade process, eg: - -{{{ -$ sudo apt-get update -$ sudo apt-get upgrade -}}} - -== Setting up PKCS!#11 == - -The PKCS11 token is in /usr/lib/libpkcs11.so. In order to start using it you need to set a pin and an SO pin. This you do with p11util thus: - -{{{ -(echo 12345678;echo 1234) | sudo p11util --set-so-pin --set-user-pin --pin-from-stdin -}}} - -It is strongly suggested to change the so pin and pin (in that order above) to something sensible. Now your token is ready to use. Your favorite PKCS11-client may or may not work depending on the state of support for PKCS11 function calls - please open tickets for whatever is missing. If you want/need to talk PKCS11 from another host, you could install and configure [[PKCS11Proxy]] on both the novena and your host. Note that currently pkcs11-proxy doesn't handle differing word-lengths so your client-side will have to be 32bit (since the novena is). - - -== Setting up the lab signer == - -The lab DNSSEC signer MUST, at this point, be running on a 32-bit system in order to work with the 32-bit Novena. - -[[https://www.dropbox.com/s/f8b4s9vic7hsqyb/cryptech-proxy-lab-20150718r2.pdf]] -- cgit v1.2.3