From 18fb1695b84248fc75ceb3569ff03cbeca51a620 Mon Sep 17 00:00:00 2001 From: Rob Austein Date: Mon, 15 Feb 2021 22:29:56 +0000 Subject: Seriously rework link processing --- pelican/content/UpgradeToKSNG.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'pelican/content/UpgradeToKSNG.md') diff --git a/pelican/content/UpgradeToKSNG.md b/pelican/content/UpgradeToKSNG.md index c9c6f67..59a3f34 100644 --- a/pelican/content/UpgradeToKSNG.md +++ b/pelican/content/UpgradeToKSNG.md @@ -84,7 +84,7 @@ just replace the old package with the new one. Homebrew, on the other hand, reports the conflict and refuses to proceed until you sort it out. The following assumes that you already had the Cryptech APT repository -or Homebrew tap configured; if not, see [BinaryPackages](BinaryPackages). +or Homebrew tap configured; if not, see [BinaryPackages](BinaryPackages.md). ### Installing cryptech-alpha-ksng package using apt-get on Debian or Ubuntu Linux @@ -162,7 +162,7 @@ cryptech> masterkey set If the above procedure somehow goes horribly wrong and bricks your alpha, you can still recover, but you'll need an ST-LINK programmer. -There's some discussion of this at [GitRepositories/sw/stm32](GitRepositories/sw/stm32). +There's some discussion of this at [GitRepositories/sw/stm32](GitRepositories/sw/stm32.md). Possible sources for the ST-LINK programmer and a suitable cable: @@ -177,7 +177,7 @@ for it. The programmer is the important part, you can use any sort of cabling you like so long as it connects the right pins of the programmer to -the corresponding pins on the Alpha; the SparkFun cable just happens +the corresponding pins on the Alpha; the [SparkFun](SparkFun.md) cable just happens to be a tidy package which matches the relevant SWD headers. We'll include a more detailed description of the recovery process here -- cgit v1.2.3