1 files changed, 136 insertions, 0 deletions
diff --git a/raw-wiki-dump/OpenDNSSEC b/raw-wiki-dump/OpenDNSSEC
new file mode 100644
index 0000000..1526a29
--- /dev/null
+++ b/raw-wiki-dump/OpenDNSSEC
@@ -0,0 +1,136 @@
+= DNSSEC signing using OpenDNSSEC and a Cryptech alpha board rev03 =
+
+== Before you start, you'll need ==
+
+- A Cryptech Alpha board, preferrably revision "rev03"
+- APT on the host system configured to find packages in the Cryptech
+  repository, see BinaryPackages for instructions
+
+{{{
+apt-get install cryptech-alpha opendnssec opensc
+}}}
+
+Once you have the software package installed, you may need to [wiki:Upgrading upgrade your HSM's firmware].
+
+== Configure the HSM ==
+
+For now, connect USB cables to both the DATA and MGMT ports of your HSM and plug them into the host where you will be running OpenDNSSEC.
+In production use it should not be necessary to leave the MGMT port connected, but it's easier to set up this way, and, as this is still a development platform, this is the configuration that's gotten the most testing.
+
+{{{
+# eval $(cryptech_probe)
+# cryptech_muxd &
+# cryptech_console
+
+Username: wheel
+Password: YouReallyNeedToChangeThisPINRightNowWeAreNotKidding
+
+cryptech> keystore set pin wheel supersikritnewpw
+cryptech> keystore set pin so 123456
+cryptech> keystore set pin user 1234
+
+cryptech> masterkey set EFBEADDE
+^C
+}}}
+
+Leave `cryptech_muxd` running, so that the PKCS !#11 library can use it to talk to the HSM.
+
+
+== Configure OpenDNSSEC ==
+
+{{{
+mkdir /var/lib/opendnssec/cryptech
+
+cat > /var/lib/opendnssec/unsigned/example.com << EOF
+\$TTL 600
+example.com.  IN SOA  hidden-master.example.com. hostmaster.example.com. (
+                                2016041401 ; serial
+                                720        ; 28800      ; refresh (8 hours)
+                                720        ; 7200       ; retry (2 hours)
+                                300        ; 604800     ; expire (1 week)
+                                120        ; 3600       ; minimum (1 hour)
+                                )
+
+               NS      lab.cryptech.is.
+test           A       127.0.0.1
+EOF
+
+chown -R opendnssec: /var/lib/opendnssec/*
+}}}
+
+
+== OpenDNSSEC configuration changes ==
+
+/etc/opendnssec/conf.xml:
+
+{{{
+<Repository name="Cryptech">
+        <Module>/usr/lib/libcryptech-pkcs11.so</Module>
+        <TokenLabel>Cryptech Token</TokenLabel>
+        <PIN>1234</PIN>
+        <SkipPublicKey/>
+</Repository>
+}}}
+
+The PIN is whatever was chosen as PIN for 'user' above.
+The !TokenLabel has to be "Cryptech Token", not something you choose.
+
+
+/etc/opendnssec/kasp.xml:
+
+    s/SoftHSM/Cryptech/
+
+/etc/opendnssec/zonelist.xml:
+
+{{{
+<Zone name="example.com">
+        <Policy>lab</Policy>
+        <SignerConfiguration>/var/lib/opendnssec/signconf/example.com.xml</SignerConfiguration>
+        <Adapters>
+                <Input>
+                        <Adapter type="File">/var/lib/opendnssec/unsigned/example.com</Adapter>
+                </Input>
+                <Output>
+                        <Adapter type="File">/var/lib/opendnssec/signed/example.com</Adapter>
+                </Output>
+        </Adapters>
+</Zone>
+}}}
+
+
+== Initialization and signing ==
+
+Make the deamons reload their configuration:
+
+{{{
+    service opendnssec-enforcer restart
+    service opendnssec-signer restart
+}}}
+
+Initialize opendnssec:
+
+{{{
+    ods-ksmutil setup
+}}}
+
+That should be it!
+
+See /var/log/syslog for output from ods-kaspcheck, ods-enforcerd and ods-signerd.
+See /var/lib/opendnssec/signed/ for a signed example.com zone.
+
+To list keys using ods-ksmutil, accessing the HSM using pkcs11
+directly (rather than going through any of the opendnssec daemons),
+export the environment variables from /etc/default/opendnssec and run
+"ods-ksmutil keys list --verbose":
+
+{{{
+# ods-ksmutil keys list --verbose
+SQLite database set to: /var/lib/opendnssec/kasp.db
+Keys:
+Zone:                           Keytype:      State:    Date of next transition (to):  Size:   Algorithm:  CKA_ID:                           Repository:                       Keytag:
+example.com                     KSK           ready     waiting for ds-seen (active)   2048    8           7f9b9329480ebe5dc81054ccb293e261  Cryptech                          62642
+example.com                     ZSK           active    2016-07-13 19:04:30 (retire)   1024    8           97e972633613bd605944a0531ff5399b  Cryptech                          56620
+}}}
+
+If the output for repository is "Cryptech NOT IN repository",
+ods-ksmutil has not been able to actually list the keys in the HSM.
+\ No newline at end of file