diff options
Diffstat (limited to 'raw-wiki-dump/GitRepositories%2Fhardware')
-rw-r--r-- | raw-wiki-dump/GitRepositories%2Fhardware | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Fhardware b/raw-wiki-dump/GitRepositories%2Fhardware new file mode 100644 index 0000000..31b7b78 --- /dev/null +++ b/raw-wiki-dump/GitRepositories%2Fhardware @@ -0,0 +1,50 @@ +{{{ +#!htmlcomment + +This page is maintained automatically by a script. Don't modify this page by hand, +your changes will just be overwritten the next time the script runs. Talk to your +Friendly Neighborhood Repository Maintainer if you need to change something here. + +}}} + +{{{ +#!html +<h1>STM32 firmware for Cryptech Alpha board</h1> + +<p>The Alpha board is our first full prototype for an open-source hardware +security module (HSM). It is a custom board with an STM32 Cortex-M4 +microcontroller and an Artix-7 FPGA, flash-based keystore, separate memory +for the Key Encryption Key, etc. See the wiki for design documents.</p> + +<h1>Copyrights</h1> + +<p>The license for all work done on this in the CrypTech project is a +3-clause BSD license.</p> + +<p>The "Noise generator" and "Amplifier" parts of the circuit diagram are +copied from Benedikt Stockebrand's ARRGH project. </p> + +<p>Both copyright statements are included in LICENSE.txt.</p> + +<h1>Board Revisions</h1> + +<ol> +<li><p><code>rev01</code> was the "dev-bridge" board, a daughterboard for the Novena, +which talked to the Novena's FPGA through the high-speed expansion +connector.</p></li> +<li><p><code>rev02</code> is the Alpha board, our first full prototype for an open-source +hardware security module (HSM). It is a custom board with an STM32 +Cortex-M4 microcontroller and an Artix-7 FPGA, flash-based keystore, +separate memory for the Key Encryption Key, etc.</p> + +<p>The board's form factor (4 x 4 in, 101.6 x 101.6 mm) was based on the +Intel NUC mini-PC, but there were some issues sourcing enough cases, so +only a few of these boards were made.</p></li> +<li><p><code>rev03</code> is functionally the same as <code>rev02</code>, but in a Eurocard form +factor (100 x 120 mm, aka "3Ux120").</p></li> +</ol> +}}} + +[[RepositoryIndex(format=table,glob=hardware)]] + +|| Clone `https://git.cryptech.is/hardware.git` || |