module modexpng_dsp_slice_wrapper_generic #
(
    AB_INPUT   = "DIRECT",
    B_REG      = 2
)
(
    clk,
    ce_a1, ce_b1, ce_a2, ce_b2,
    ce_m, ce_p, ce_mode,
    a, b, p,
    inmode, opmode, alumode,
    casc_a_in,  casc_b_in,
    casc_a_out, casc_b_out
);

    `include "modexpng_parameters.vh"
    `include "modexpng_dsp48e1.vh"
        
    input                           clk;            //
    input                           ce_a1;          //
    input                           ce_b1;          //
    input                           ce_a2;          //
    input                           ce_b2;          //
    input                           ce_m;           //
    input                           ce_p;           //
    input                           ce_mode;        //
    input  [       WORD_EXT_W -1:0] a;              //
    input  [           WORD_W -1:0] b;              //
    output [            MAC_W -1:0] p;              //
    input  [ DSP48E1_INMODE_W -1:0] inmode;         //
    input  [ DSP48E1_OPMODE_W -1:0] opmode;         //
    input  [DSP48E1_ALUMODE_W -1:0] alumode;        //
    input  [      DSP48E1_A_W -1:0] casc_a_in;      //
    input  [      DSP48E1_B_W -1:0] casc_b_in;      //
    output [      DSP48E1_A_W -1:0] casc_a_out;     //
    output [      DSP48E1_B_W -1:0] casc_b_out;     //
    
    //
    // A Port
    //
    wire [WORD_EXT_W -1:0] a_mux = AB_INPUT == "DIRECT" ? a : casc_a_in[WORD_EXT_W-1:0];
    reg  [WORD_EXT_W -1:0] a_reg1;
    reg  [WORD_EXT_W -1:0] a_reg2;

    assign casc_a_out = a_reg1;

    always @(posedge clk) begin
        if (ce_a1) a_reg1 <= a_mux;
        if (ce_a2) a_reg2 <= a_reg1;
    end
    
    //
    // B Port
    //
    wire [WORD_W -1:0] b_mux = AB_INPUT == "DIRECT" ? b : casc_b_in[WORD_W-1:0];
    reg  [WORD_W -1:0] b_reg1;
    reg  [WORD_W -1:0] b_reg2;

    assign casc_b_out = b_reg1;

    always @(posedge clk) begin
        if (ce_b1) b_reg1 <= b_mux;
        if (ce_b2) b_reg2 <= B_REG == 2 ? b_reg1 : b_mux;
    end

    //
    // OPMODE Port
    //
    reg [DSP48E1_OPMODE_W -1:0] opmode_reg;
    
    always @(posedge clk) begin
        if (ce_mode) opmode_reg <= opmode;
    end

    //
    // M, P
    //
    reg [MAC_W-1:0] m_reg;
    reg [MAC_W-1:0] p_reg;
    
    wire [MAC_W-1:0] a_pad = {{MAC_W-WORD_EXT_W{1'b0}}, a_reg2};
    wire [MAC_W-1:0] b_pad = {{MAC_W-WORD_W{1'b0}}, b_reg2};
    wire [MAC_W-1:0] p_pad = opmode_reg[5] ? p_reg : {MAC_W{1'b0}};
    
    assign p = p_reg;
    
    always @(posedge clk) begin
        if (ce_m) m_reg <= a_pad * b_pad;
        if (ce_p) p_reg <= m_reg + p_pad;
    end

endmodule