From 43b94a6ada83454c3404bda019ec114f97379c82 Mon Sep 17 00:00:00 2001 From: "Pavel V. Shatov" Date: Thu, 27 Aug 2015 00:01:24 +0400 Subject: Initial version of FMC driver for STM32. --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c | 454 +++++++++++++++++++++ 1 file changed, 454 insertions(+) create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c new file mode 100644 index 0000000..7fd58c3 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_wwdg.c + * @author MCD Application Team + * @version V1.3.2 + * @date 26-June-2015 + * @brief WWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Window Watchdog (WWDG) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State functions + @verbatim + ============================================================================== + ##### WWDG specific features ##### + ============================================================================== + [..] + Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (downcounter) + before reaching 0x3F value (i.e. a reset is generated when the counter + value rolls over from 0x40 to 0x3F). + + (+) An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + (+) Once enabled the WWDG cannot be disabled except by a system reset. + (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG + reset occurs. + (+) The WWDG counter input clock is derived from the APB clock divided + by a programmable prescaler. + (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler) + (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock + (+) WWDG Counter refresh is allowed between the following limits : + (++) min time (mS) = 1000 * (Counter – Window) / WWDG clock + (++) max time (mS) = 1000 * (Counter – 0x40) / WWDG clock + + (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms + + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). + (+) Set the WWDG prescaler, refresh window and counter value + using HAL_WWDG_Init() function. + (+) Start the WWDG using HAL_WWDG_Start() function. + When the WWDG is enabled the counter value should be configured to + a value greater than 0x40 to prevent generating an immediate reset. + (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is + generated when the counter reaches 0x40, and then start the WWDG using + HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can + add his own code by customization of function pointer HAL_WWDG_WakeupCallback + Once enabled, EWI interrupt cannot be disabled except by a system reset. + (+) Then the application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_WWDG_Refresh() function. This operation must occur only when + the counter is lower than the refresh window value already programmed. + + *** WWDG HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in WWDG HAL driver. + + (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral + (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status + (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags + (+) __HAL_WWDG_ENABLE_IT: Enables the WWDG early wake-up interrupt + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup WWDG WWDG + * @brief WWDG HAL module driver. + * @{ + */ + +#ifdef HAL_WWDG_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup WWDG_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize the WWDG according to the specified parameters + in the WWDG_InitTypeDef and create the associated handle + (+) DeInitialize the WWDG peripheral + (+) Initialize the WWDG MSP + (+) DeInitialize the WWDG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the WWDG according to the specified + * parameters in the WWDG_InitTypeDef and creates the associated handle. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if(hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); + assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); + assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); + + if(hwwdg->State == HAL_WWDG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hwwdg->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_WWDG_MspInit(hwwdg); + } + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_BUSY; + + /* Set WWDG Prescaler and Window */ + MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window)); + /* Set WWDG Counter */ + MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the WWDG peripheral. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if(hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_WWDG_MspDeInit(hwwdg); + + /* Reset WWDG Control register */ + hwwdg->Instance->CR = (uint32_t)0x0000007F; + + /* Reset WWDG Configuration register */ + hwwdg->Instance->CFR = (uint32_t)0x0000007F; + + /* Reset WWDG Status register */ + hwwdg->Instance->SR = 0; + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hwwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the WWDG MSP. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_WWDG_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the WWDG MSP. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_WWDG_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the WWDG. + (+) Refresh the WWDG. + (+) Handle WWDG interrupt request. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the WWDG. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg) +{ + /* Process Locked */ + __HAL_LOCK(hwwdg); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_BUSY; + + /* Enable the peripheral */ + __HAL_WWDG_ENABLE(hwwdg); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hwwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the WWDG with interrupt enabled. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg) +{ + /* Process Locked */ + __HAL_LOCK(hwwdg); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_BUSY; + + /* Enable the Early Wakeup Interrupt */ + __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI); + + /* Enable the peripheral */ + __HAL_WWDG_ENABLE(hwwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Refreshes the WWDG. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @param Counter: value of counter to put in WWDG counter + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter) +{ + /* Process Locked */ + __HAL_LOCK(hwwdg); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + + /* Write to WWDG CR the WWDG Counter value to refresh with */ + MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hwwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handles WWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) +{ + /* Check if Early Wakeup Interrupt is enable */ + if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) + { + /* Check if WWDG Early Wakeup Interrupt occurred */ + if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) + { + /* Early Wakeup callback */ + HAL_WWDG_WakeupCallback(hwwdg); + + /* Change WWDG peripheral state */ + hwwdg->State = HAL_WWDG_STATE_READY; + + /* Clear the WWDG Early Wakeup flag */ + __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); + + /* Process Unlocked */ + __HAL_UNLOCK(hwwdg); + } + } +} + +/** + * @brief Early Wakeup WWDG callback. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_WWDG_WakeupCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the WWDG state. + * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL state + */ +HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg) +{ + return hwwdg->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_WWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3