//------------------------------------------------------------------------------
//
// curve_adder_256.v
// -----------------------------------------------------------------------------
// Elliptic curve point adder.
//
// Authors: Pavel Shatov
//
// Copyright (c) 2016, NORDUnet A/S
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
//------------------------------------------------------------------------------
module curve_dbl_add_256
(
clk, rst_n,
ena, rdy,
uop_addr, uop,
px_addr, py_addr, pz_addr, rx_addr, ry_addr, rz_addr, q_addr, v_addr,
rx_wren, ry_wren, rz_wren,
px_din, py_din, pz_din,
rx_din, ry_din, rz_din,
rx_dout, ry_dout, rz_dout, q_din, v_din
);
//
// Microcode
//
`include "uop_ecdsa.v"
//
// Constants
//
localparam WORD_COUNTER_WIDTH = 3; // 0 .. 7
localparam OPERAND_NUM_WORDS = 8; // 8 * 32 = 256
//
// Ports
//
input wire clk; // system clock
input wire rst_n; // active-low async reset
input wire ena; // enable input
output wire rdy; // ready output
output reg [ 6-1: 0] uop_addr;
input wire [20-1: 0] uop;
output reg [WORD_COUNTER_WIDTH-1:0] px_addr;
output reg [WORD_COUNTER_WIDTH-1:0] py_addr;
output reg [WORD_COUNTER_WIDTH-1:0] pz_addr;
output reg [WORD_COUNTER_WIDTH-1:0] rx_addr;
output reg [WORD_COUNTER_WIDTH-1:0] ry_addr;
output reg [WORD_COUNTER_WIDTH-1:0] rz_addr;
output reg [WORD_COUNTER_WIDTH-1:0] v_addr;
output wire [WORD_COUNTER_WIDTH-1:0] q_addr;
output wire rx_wren;
output wire ry_wren;
output wire rz_wren;
input wire [ 32-1:0] px_din;
input wire [ 32-1:0] py_din;
input wire [ 32-1:0] pz_din;
input wire [ 32-1:0] rx_din;
input wire [ 32-1:0] ry_din;
input wire [ 32-1:0] rz_din;
output wire [ 32-1:0] rx_dout;
output wire [ 32-1:0] ry_dout;
output wire [ 32-1:0] rz_dout;
input wire [ 32-1:0] q_din;
input wire [ 32-1:0] v_din;
//
// Microcode
//
wire [ 4: 0] uop_opcode = uop[19:15];
wire [ 4: 0] uop_src_a = uop[14:10];
wire [ 4: 0] uop_src_b = uop[ 9: 5];
wire [ 2: 0] uop_dst = uop[ 4: 2];
wire [ 1: 0] uop_exec = uop[ 1: 0];
//
// Multi-Word Comparator
//
wire mw_cmp_ena;
wire mw_cmp_rdy;
wire mw_cmp_out_l;
wire mw_cmp_out_e;
wire mw_cmp_out_g;
wire [WORD_COUNTER_WIDTH-1:0] mw_cmp_addr_xy;
wire [ 32-1:0] mw_cmp_din_x;
wire [ 32-1:0] mw_cmp_din_y;
// flags
reg flag_pz_is_zero;
reg flag_t1_is_zero;
reg flag_t2_is_zero;
mw_comparator #
(
.WORD_COUNTER_WIDTH (WORD_COUNTER_WIDTH),
.OPERAND_NUM_WORDS (OPERAND_NUM_WORDS)
)
mw_comparator_inst
(
.clk (clk),
.rst_n (rst_n),
.ena (mw_cmp_ena),
.rdy (mw_cmp_rdy),
.xy_addr (mw_cmp_addr_xy),
.x_din (mw_cmp_din_x),
.y_din (mw_cmp_din_y),
.cmp_l (mw_cmp_out_l),
.cmp_e (mw_cmp_out_e),
.cmp_g (mw_cmp_out_g)
);
//
// Modular Adder
//
wire mod_add_ena;
wire mod_add_rdy;
wire [WORD_COUNTER_WIDTH-1:0] mod_add_addr_ab;
wire [WORD_COUNTER_WIDTH-1:0] mod_add_addr_n;
wire [WORD_COUNTER_WIDTH-1:0] mod_add_addr_s;
wire mod_add_wren_s;
wire [ 32-1:0] mod_add_din_a;
wire [ 32-1:0] mod_add_din_b;
wire [ 32-1:0] mod_add_din_n;
wire [ 32-1:0] mod_add_dout_s;
assign mod_add_din_n = q_din;
modular_adder #
(
.WORD_COUNTER_WIDTH (WORD_COUNTER_WIDTH),
.OPERAND_NUM_WORDS (OPERAND_NUM_WORDS)
)
modular_adder_inst
(
.clk (clk),
.rst_n (rst_n),
.ena (mod_add_ena),
.rdy (mod_add_rdy),
.ab_addr (mod_add_addr_ab),
.n_addr (mod_add_addr_n),
.s_addr (mod_add_addr_s),
.s_wren (mod_add_wren_s),
.a_din (mod_add_din_a),
.b_din (mod_add_din_b),
.n_din (mod_add_din_n),
.s_dout (mod_add_dout_s)
);
//
// Modular Subtractor
//
wire mod_sub_ena;
wire mod_sub_rdy;
wire [WORD_COUNTER_WIDTH-1:0] mod_sub_addr_ab;
wire [WORD_COUNTER_WIDTH-1:0] mod_sub_addr_n;
wire [WORD_COUNTER_WIDTH-1:0] mod_sub_addr_d;
wire mod_sub_wren_d;
wire [ 32-1:0] mod_sub_din_a;
wire [ 32-1:0] mod_sub_din_b;
wire [ 32-1:0] mod_sub_din_n;
wire [ 32-1:0] mod_sub_dout_d;
assign mod_sub_din_n = q_din;
modular_subtractor #
(
.WORD_COUNTER_WIDTH (WORD_COUNTER_WIDTH),
.OPERAND_NUM_WORDS (OPERAND_NUM_WORDS)
)
modular_subtractor_inst
(
.clk (clk),
.rst_n (rst_n),
.ena (mod_sub_ena),
.rdy (mod_sub_rdy),
.ab_addr (mod_sub_addr_ab),
.n_addr (mod_sub_addr_n),
.d_addr (mod_sub_addr_d),
.d_wren (mod_sub_wren_d),
.a_din (mod_sub_din_a),
.b_din (mod_sub_din_b),
.n_din (mod_sub_din_n),
.d_dout (mod_sub_dout_d)
);
//
// Modular Multiplier
//
wire mod_mul_ena;
wire mod_mul_rdy;
wire [WORD_COUNTER_WIDTH-1:0] mod_mul_addr_a;
wire [WORD_COUNTER_WIDTH-1:0] mod_mul_addr_b;
wire [WORD_COUNTER_WIDTH-1:0] mod_mul_addr_n;
wire [WORD_COUNTER_WIDTH-1:0] mod_mul_addr_p;
wire mod_mul_wren_p;
wire [ 32-1:0] mod_mul_din_a;
wire [ 32-1:0] mod_mul_din_b;
wire [ 32-1:0] mod_mul_din_n;
wire [ 32-1:0] mod_mul_dout_p;
assign mod_mul_din_n = q_din;
modular_multiplier_256 modular_multiplier_inst
(
.clk (clk),
.rst_n (rst_n),
.ena (mod_mul_ena),
.rdy (mod_mul_rdy),
.a_addr (mod_mul_addr_a),
.b_addr (mod_mul_addr_b),
.n_addr (mod_mul_addr_n),
.p_addr (mod_mul_addr_p),
.p_wren (mod_mul_wren_p),
.a_din (mod_mul_din_a),
.b_din (mod_mul_din_b),
.n_din (mod_mul_din_n),
.p_dout (mod_mul_dout_p)
);
//
// Multi-Word Data Mover
//
wire mw_mov_ena;
wire mw_mov_rdy;
wire [WORD_COUNTER_WIDTH-1:0] mw_mov_addr_x;
wire [WORD_COUNTER_WIDTH-1:0] mw_mov_addr_y;
wire mw_mov_wren_y;
wire [ 32-1:0] mw_mov_din_x;
wire [ 32-1:0] mw_mov_dout_y;
mw_mover mw_mover_inst
(
.clk (clk),
.rst_n (rst_n),
.ena (mw_mov_ena),
.rdy (mw_mov_rdy),
.x_addr (mw_mov_addr_x),
.y_addr (mw_mov_addr_y),
.y_wren (mw_mov_wren_y),
.x_din (mw_mov_din_x),
.y_dout (mw_mov_dout_y)
);
//
// ROMs
//
reg [WORD_COUNTER_WIDTH-1:0] brom_one_addr;
//reg [WORD_COUNTER_WIDTH-1:0] brom_zero_addr;
reg [WORD_COUNTER_WIDTH-1:0] brom_delta_addr;
reg [WORD_COUNTER_WIDTH-1:0] brom_g_x_addr;
reg [WORD_COUNTER_WIDTH-1:0] brom_g_y_addr;
reg [WORD_COUNTER_WIDTH-1:0] brom_h_x_addr;
reg [WORD_COUNTER_WIDTH-1:0] brom_h_y_addr;
wire [ 32-1:0] brom_one_dout;
wire [ 32-1:0] brom_zero_dout;
wire [ 32-1:0] brom_delta_dout;
wire [ 32-1:0] brom_g_x_dout;
wire [ 32-1:0] brom_g_y_dout;
wire [ 32-1:0] brom_h_x_dout;
wire [ 32-1:0] brom_h_y_dout;
(* ROM_STYLE="BLOCK" *) brom_p256_one brom_one_inst
(.clk(clk), .b_addr(brom_one_addr), .b_out(brom_one_dout));
brom_p256_zero brom_zero_inst
(.b_out(brom_zero_dout));
(* ROM_STYLE="BLOCK" *) brom_p256_delta brom_delta_inst
(.clk(clk), .b_addr(brom_delta_addr), .b_out(brom_delta_dout));
(* ROM_STYLE="BLOCK" *) brom_p256_g_x brom_g_x_inst
(.clk(clk), .b_addr(brom_g_x_addr), .b_out(brom_g_x_dout));
(* ROM_STYLE="BLOCK" *) brom_p256_g_y brom_g_y_inst
(.clk(clk), .b_addr(brom_g_y_addr), .b_out(brom_g_y_dout));
(* ROM_STYLE="BLOCK" *) brom_p256_h_x brom_h_x_inst
(.clk(clk), .b_addr(brom_h_x_addr), .b_out(brom_h_x_dout));
(* ROM_STYLE="BLOCK" *) brom_p256_h_y brom_h_y_inst
(.clk(clk), .b_addr(brom_h_y_addr), .b_out(brom_h_y_dout));
//
// Temporary Variables
//
reg [WORD_COUNTER_WIDTH-1:0] bram_t1_wr_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t2_wr_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t3_wr_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t4_wr_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t1_rd_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t2_rd_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t3_rd_addr;
reg [WORD_COUNTER_WIDTH-1:0] bram_t4_rd_addr;
wire bram_t1_wr_en;
wire bram_t2_wr_en;
wire bram_t3_wr_en;
wire bram_t4_wr_en;
wire [ 32-1:0] bram_t1_wr_data;
wire [ 32-1:0] bram_t2_wr_data;
wire [ 32-1:0] bram_t3_wr_data;
wire [ 32-1:0] bram_t4_wr_data;
wire [ 32-1:0] bram_t1_rd_data;
wire [ 32-1:0] bram_t2_rd_data;
wire [ 32-1:0] bram_t3_rd_data;
wire [ 32-1:0] bram_t4_rd_data;
bram_1rw_1ro_readfirst #
( .MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)
)
bram_t1
( .clk (clk),
.a_addr(bram_t1_wr_addr), .a_wr(bram_t1_wr_en), .a_in(bram_t1_wr_data), .a_out(),
.b_addr(bram_t1_rd_addr), .b_out(bram_t1_rd_data)
);
bram_1rw_1ro_readfirst #
( .MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)
)
bram_t2
( .clk (clk),
.a_addr(bram_t2_wr_addr), .a_wr(bram_t2_wr_en), .a_in(bram_t2_wr_data), .a_out(),
.b_addr(bram_t2_rd_addr), .b_out(bram_t2_rd_data)
);
bram_1rw_1ro_readfirst #
( .MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)
)
bram_t3
( .clk (clk),
.a_addr(bram_t3_wr_addr), .a_wr(bram_t3_wr_en), .a_in(bram_t3_wr_data), .a_out(),
.b_addr(bram_t3_rd_addr), .b_out(bram_t3_rd_data)
);
bram_1rw_1ro_readfirst #
( .MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)
)
bram_t4
( .clk (clk),
.a_addr(bram_t4_wr_addr), .a_wr(bram_t4_wr_en), .a_in(bram_t4_wr_data), .a_out(),
.b_addr(bram_t4_rd_addr), .b_out(bram_t4_rd_data)
);
//
// uOP Trigger Logic
//
reg uop_trig;
always @(posedge clk or negedge rst_n)
//
if (rst_n == 1'b0) uop_trig <= 1'b0;
else uop_trig <= (fsm_state == FSM_STATE_FETCH) ? 1'b1 : 1'b0;
//
// FSM
//
localparam [ 1: 0] FSM_STATE_STALL = 2'b00;
localparam [ 1: 0] FSM_STATE_FETCH = 2'b01;
localparam [ 1: 0] FSM_STATE_EXECUTE = 2'b10;
reg [ 1: 0] fsm_state = FSM_STATE_STALL;
wire [ 1: 0] fsm_state_next = (uop_opcode == OPCODE_RDY) ? FSM_STATE_STALL : FSM_STATE_FETCH;
//
// FSM Transition Logic
//
reg uop_done;
always @(posedge clk or negedge rst_n)
//
if (rst_n == 1'b0) fsm_state <= FSM_STATE_STALL;
else case (fsm_state)
FSM_STATE_STALL: fsm_state <= ena ? FSM_STATE_FETCH : FSM_STATE_STALL;
FSM_STATE_FETCH: fsm_state <= FSM_STATE_EXECUTE;
FSM_STATE_EXECUTE: fsm_state <= (!uop_trig && uop_done) ? fsm_state_next : FSM_STATE_EXECUTE;
default: fsm_state <= FSM_STATE_STALL;
endcase
//
// uOP Address Increment Logic
//
always @(posedge clk)
//
if (fsm_state == FSM_STATE_STALL)
uop_addr <= 5'd0;
else if (fsm_state == FSM_STATE_EXECUTE)
if (!uop_trig && uop_done)
uop_addr <= (uop_opcode == OPCODE_RDY) ? 5'd0 : uop_addr + 1'b1;
//
// uOP Completion Logic
//
always @(*)
//
case (uop_opcode)
OPCODE_CMP: uop_done = mw_cmp_rdy;
OPCODE_MOV: uop_done = mw_mov_rdy;
OPCODE_ADD: uop_done = mod_add_rdy;
OPCODE_SUB: uop_done = mod_sub_rdy;
OPCODE_MUL: uop_done = mod_mul_rdy;
OPCODE_RDY: uop_done = 1'b1;
default: uop_done = 1'b0;
endcase
//
// Helper Modules Enable Logic
//
assign mw_cmp_ena = uop_opcode[0] & uop_trig;
assign mw_mov_ena = uop_opcode[1] & uop_trig;
assign mod_add_ena = uop_opcode[2] & uop_trig;
assign mod_sub_ena = uop_opcode[3] & uop_trig;
assign mod_mul_ena = uop_opcode[4] & uop_trig;
//
// uOP Source Value Decoding Logic
//
reg [31: 0] uop_src_a_value;
always @(*)
//
case (uop_src_a)
UOP_SRC_PX: uop_src_a_value = px_din;
UOP_SRC_PY: uop_src_a_value = py_din;
UOP_SRC_PZ: uop_src_a_value = pz_din;
UOP_SRC_RX: uop_src_a_value = rx_din;
UOP_SRC_RY: uop_src_a_value = ry_din;
UOP_SRC_RZ: uop_src_a_value = rz_din;
UOP_SRC_T1: uop_src_a_value = bram_t1_rd_data;
UOP_SRC_T2: uop_src_a_value = bram_t2_rd_data;
UOP_SRC_T3: uop_src_a_value = bram_t3_rd_data;
UOP_SRC_T4: uop_src_a_value = bram_t4_rd_data;
UOP_SRC_ONE: uop_src_a_value = brom_one_dout;
UOP_SRC_ZERO: uop_src_a_value = brom_zero_dout;
UOP_SRC_DELTA: uop_src_a_value = brom_delta_dout;
UOP_SRC_G_X: uop_src_a_value = brom_g_x_dout;
UOP_SRC_G_Y: uop_src_a_value = brom_g_y_dout;
UOP_SRC_H_X: uop_src_a_value = brom_h_x_dout;
UOP_SRC_H_Y: uop_src_a_value = brom_h_y_dout;
UOP_SRC_V: uop_src_a_value = v_din;
default: uop_src_a_value = {32{1'bX}};
endcase
assign mw_cmp_din_x = uop_src_a_value;
assign mw_mov_din_x = uop_src_a_value;
assign mod_add_din_a = uop_src_a_value;
assign mod_sub_din_a = uop_src_a_value;
assign mod_mul_din_a = uop_src_a_value;
reg [31: 0] uop_src_b_value;
always @(*)
//
case (uop_src_b)
UOP_SRC_PX: uop_src_b_value = px_din;
UOP_SRC_PY: uop_src_b_value = py_din;
UOP_SRC_PZ: uop_src_b_value = pz_din;
UOP_SRC_RX: uop_src_b_value = rx_din;
UOP_SRC_RY: uop_src_b_value = ry_din;
UOP_SRC_RZ: uop_src_b_value = rz_din;
UOP_SRC_T1: uop_src_b_value = bram_t1_rd_data;
UOP_SRC_T2: uop_src_b_value = bram_t2_rd_data;
UOP_SRC_T3: uop_src_b_value = bram_t3_rd_data;
UOP_SRC_T4: uop_src_b_value = bram_t4_rd_data;
UOP_SRC_ONE: uop_src_b_value = brom_one_dout;
UOP_SRC_ZERO: uop_src_b_value = brom_zero_dout;
UOP_SRC_DELTA: uop_src_b_value = brom_delta_dout;
UOP_SRC_G_X: uop_src_b_value = brom_g_x_dout;
UOP_SRC_G_Y: uop_src_b_value = brom_g_y_dout;
UOP_SRC_H_X: uop_src_b_value = brom_h_x_dout;
UOP_SRC_H_Y: uop_src_b_value = brom_h_y_dout;
UOP_SRC_V: uop_src_b_value = v_din;
default: uop_src_b_value = {32{1'bX}};
endcase
assign mw_cmp_din_y = uop_src_b_value;
assign mod_add_din_b = uop_src_b_value;
assign mod_sub_din_b = uop_src_b_value;
assign mod_mul_din_b = uop_src_b_value;
//
// uOP Source & Destination Address Decoding Logic
//
reg [WORD_COUNTER_WIDTH-1:0] uop_src_a_addr;
reg [WORD_COUNTER_WIDTH-1:0] uop_src_b_addr;
reg [WORD_COUNTER_WIDTH-1:0] uop_dst_addr;
reg [WORD_COUNTER_WIDTH-1:0] uop_q_addr;
assign q_addr = uop_q_addr;
always @(*)
//
case (uop_opcode)
//
OPCODE_CMP: begin
uop_src_a_addr = mw_cmp_addr_xy;
uop_src_b_addr = mw_cmp_addr_xy;
uop_dst_addr = {WORD_COUNTER_WIDTH{1'bX}};
uop_q_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
OPCODE_MOV: begin
uop_src_a_addr = mw_mov_addr_x;
uop_src_b_addr = {WORD_COUNTER_WIDTH{1'bX}};
uop_dst_addr = mw_mov_addr_y;
uop_q_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
OPCODE_ADD: begin
uop_src_a_addr = mod_add_addr_ab;
uop_src_b_addr = mod_add_addr_ab;
uop_dst_addr = mod_add_addr_s;
uop_q_addr = mod_add_addr_n;
end
//
OPCODE_SUB: begin
uop_src_a_addr = mod_sub_addr_ab;
uop_src_b_addr = mod_sub_addr_ab;
uop_dst_addr = mod_sub_addr_d;
uop_q_addr = mod_sub_addr_n;
end
//
OPCODE_MUL: begin
uop_src_a_addr = mod_mul_addr_a;
uop_src_b_addr = mod_mul_addr_b;
uop_dst_addr = mod_mul_addr_p;
uop_q_addr = mod_mul_addr_n;
end
//
default: begin
uop_src_a_addr = {WORD_COUNTER_WIDTH{1'bX}};
uop_src_b_addr = {WORD_COUNTER_WIDTH{1'bX}};
uop_dst_addr = {WORD_COUNTER_WIDTH{1'bX}};
uop_q_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
endcase
//
// uOP Conditional Execution Logic
//
reg uop_exec_effective;
always @(*)
//
case (uop_exec)
UOP_EXEC_ALWAYS: uop_exec_effective = 1'b1;
UOP_EXEC_PZT1T2_0XX: uop_exec_effective = flag_pz_is_zero;
UOP_EXEC_PZT1T2_100: uop_exec_effective = !flag_pz_is_zero && flag_t1_is_zero && flag_t2_is_zero;
UOP_EXEC_PZT1T2_101: uop_exec_effective = !flag_pz_is_zero && flag_t1_is_zero && !flag_t2_is_zero;
endcase
//
// uOP Destination Store Logic
//
reg uop_dst_wren;
always @(*)
//
case (uop_opcode)
//
OPCODE_MOV: uop_dst_wren = mw_mov_wren_y & uop_exec_effective;
OPCODE_ADD: uop_dst_wren = mod_add_wren_s;
OPCODE_SUB: uop_dst_wren = mod_sub_wren_d;
OPCODE_MUL: uop_dst_wren = mod_mul_wren_p;
default: uop_dst_wren = 1'b0;
//
endcase
always @(*) begin
//
//
//
if (uop_src_a == UOP_SRC_PX) px_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_PX) px_addr = uop_src_b_addr;
else px_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_PY) py_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_PY) py_addr = uop_src_b_addr;
else py_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_PZ) pz_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_PZ) pz_addr = uop_src_b_addr;
else pz_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_src_a == UOP_SRC_ONE) brom_one_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_ONE) brom_one_addr = uop_src_b_addr;
else brom_one_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//if (uop_src_a == UOP_SRC_ZERO) brom_zero_addr = uop_src_a_addr;
//else if (uop_src_b == UOP_SRC_ZERO) brom_zero_addr = uop_src_b_addr;
//else brom_zero_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_DELTA) brom_delta_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_DELTA) brom_delta_addr = uop_src_b_addr;
else brom_delta_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_src_a == UOP_SRC_G_X) brom_g_x_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_G_X) brom_g_x_addr = uop_src_b_addr;
else brom_g_x_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_G_Y) brom_g_y_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_G_Y) brom_g_y_addr = uop_src_b_addr;
else brom_g_y_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_src_a == UOP_SRC_H_X) brom_h_x_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_H_X) brom_h_x_addr = uop_src_b_addr;
else brom_h_x_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_H_Y) brom_h_y_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_H_Y) brom_h_y_addr = uop_src_b_addr;
else brom_h_y_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_src_a == UOP_SRC_V) v_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_V) v_addr = uop_src_b_addr;
else v_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_src_a == UOP_SRC_T1) bram_t1_rd_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_T1) bram_t1_rd_addr = uop_src_b_addr;
else bram_t1_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_T2) bram_t2_rd_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_T2) bram_t2_rd_addr = uop_src_b_addr;
else bram_t2_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_T3) bram_t3_rd_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_T3) bram_t3_rd_addr = uop_src_b_addr;
else bram_t3_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_src_a == UOP_SRC_T4) bram_t4_rd_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_T4) bram_t4_rd_addr = uop_src_b_addr;
else bram_t4_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if (uop_dst == UOP_DST_T1) bram_t1_wr_addr = uop_dst_addr;
else bram_t1_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_dst == UOP_DST_T2) bram_t2_wr_addr = uop_dst_addr;
else bram_t2_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_dst == UOP_DST_T3) bram_t3_wr_addr = uop_dst_addr;
else bram_t3_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
if (uop_dst == UOP_DST_T4) bram_t4_wr_addr = uop_dst_addr;
else bram_t4_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};
//
//
//
if ((uop_dst == UOP_DST_RX) && (uop_dst_wren)) rx_addr = uop_dst_addr;
else begin
if (uop_src_a == UOP_SRC_RX) rx_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_RX) rx_addr = uop_src_b_addr;
else rx_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
if ((uop_dst == UOP_DST_RY) && (uop_dst_wren)) ry_addr = uop_dst_addr;
else begin
if (uop_src_a == UOP_SRC_RY) ry_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_RY) ry_addr = uop_src_b_addr;
else ry_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
if ((uop_dst == UOP_DST_RZ) && (uop_dst_wren)) rz_addr = uop_dst_addr;
else begin
if (uop_src_a == UOP_SRC_RZ) rz_addr = uop_src_a_addr;
else if (uop_src_b == UOP_SRC_RZ) rz_addr = uop_src_b_addr;
else rz_addr = {WORD_COUNTER_WIDTH{1'bX}};
end
//
end
assign rx_wren = uop_dst_wren && (uop_dst == UOP_DST_RX);
assign ry_wren = uop_dst_wren && (uop_dst == UOP_DST_RY);
assign rz_wren = uop_dst_wren && (uop_dst == UOP_DST_RZ);
assign bram_t1_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T1);
assign bram_t2_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T2);
assign bram_t3_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T3);
assign bram_t4_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T4);
//
// Destination Value Selector
//
reg [31: 0] uop_dst_value;
always @(*)
//
case (uop_opcode)
OPCODE_MOV: uop_dst_value = mw_mov_dout_y;
OPCODE_ADD: uop_dst_value = mod_add_dout_s;
OPCODE_SUB: uop_dst_value = mod_sub_dout_d;
OPCODE_MUL: uop_dst_value = mod_mul_dout_p;
default: uop_dst_value = {32{1'bX}};
endcase
assign rx_dout = uop_dst_value;
assign ry_dout = uop_dst_value;
assign rz_dout = uop_dst_value;
assign bram_t1_wr_data = uop_dst_value;
assign bram_t2_wr_data = uop_dst_value;
assign bram_t3_wr_data = uop_dst_value;
assign bram_t4_wr_data = uop_dst_value;
//
// Latch Comparison Flags
//
always @(posedge clk)
//
if ( (fsm_state == FSM_STATE_EXECUTE) &&
(uop_opcode == OPCODE_CMP) &&
(uop_done && !uop_trig) ) begin
if ( (uop_src_a == UOP_SRC_PZ) && (uop_src_b == UOP_SRC_ZERO) )
flag_pz_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;
if ( (uop_src_a == UOP_SRC_T1) && (uop_src_b == UOP_SRC_ZERO) )
flag_t1_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;
if ( (uop_src_a == UOP_SRC_T2) && (uop_src_b == UOP_SRC_ZERO) )
flag_t2_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;
end
//
// Ready Flag Logic
//
reg rdy_reg = 1'b1;
assign rdy = rdy_reg;
always @(posedge clk or negedge rst_n)
//
if (rst_n == 1'b0) rdy_reg <= 1'b1;
else begin
/* clear flag */
if (fsm_state == FSM_STATE_STALL)
if (ena) rdy_reg <= 1'b0;
/* set flag */
if ((fsm_state == FSM_STATE_EXECUTE) && !uop_trig && uop_done)
if (uop_opcode == OPCODE_RDY) rdy_reg <= 1'b1;
end
endmodule
//------------------------------------------------------------------------------
// End-of-File
//------------------------------------------------------------------------------
