index
:
user/shatov/alpha_rev04
master
Unnamed repository; edit this file 'description' to name the repository.
git repositories
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
KiCAD
/
Cryptech Alpha.kicad_pcb
Age
Commit message (
Expand
)
Author
2021-06-07
Updated the board with the fixed footprints.
Pavel V. Shatov (Meister)
2021-06-07
Updated the board with the new footprints to correct the fabrication layers.
Pavel V. Shatov (Meister)
2021-06-03
Updated the board with the new power jack footprint.
Pavel V. Shatov (Meister)
2020-09-23
Finished BOM overhaul. All the discrete components should have proper tolerance
Pavel V. Shatov (Meister)
2020-09-23
Turns out things were even worse, since resistor tolerance values apparently
Pavel V. Shatov (Meister)
2020-09-23
First attempt at automatic BOM export failed. Turns out some of the components
Pavel V. Shatov (Meister)
2020-09-23
Cleaned up silkscreen, this was mostly about re-arranging component names to
Pavel V. Shatov (Meister)
2020-09-23
Doing some final polishing, added the "Open Source Hardware" logo I removed
Pavel V. Shatov (Meister)
2020-09-23
Finished cleanup, fixed all pcbnew DRC errors reported. First attempt at
Pavel V. Shatov (Meister)
2020-09-23
Did some cleanup, also had to re-route VCC_PLL for iCE40.
Pavel V. Shatov (Meister)
2020-09-23
Entirely routed the design. Not useable right now, so far just reports zero
Pavel V. Shatov (Meister)
2020-09-23
Intermediate step, re-routing the design according to the changes in schematics.
Pavel V. Shatov (Meister)
2020-09-23
Almost finished doing edits to schematics. Added Lattice iCE40 UltraPlus FPGA
Pavel V. Shatov (Meister)
2020-09-23
Continued doing edits. Removed AVR tiny tamper detection processor.
Pavel V. Shatov (Meister)
2020-09-23
Started editing the design. So far removed the old MKM component.
Pavel V. Shatov (Meister)
2020-09-23
Forward annotation (eeschema -> pcbnew) is now FULLY OPERATIONAL! Hoorah!
Pavel V. Shatov (Meister)
2020-09-23
Turns out multi-part components were not fully converted and were not
Pavel V. Shatov (Meister)
2020-09-23
Fixed PCB footprint references. Basically had to just replace dashes with
Pavel V. Shatov (Meister)
2020-09-23
Initial project cleanup
Pavel V. Shatov (Meister)
2020-05-25
Internal ground layers OK.
Pavel V. Shatov (Meister)
2020-05-25
Bottom Layer OK
Pavel V. Shatov (Meister)
2020-05-25
Internal signal layer #2 cleaned up.
Pavel V. Shatov (Meister)
2020-05-25
Internal signal layer #1 cleaned up.
Pavel V. Shatov (Meister)
2020-05-11
Top (aka "Front") Layer OK
Pavel V. Shatov (Meister)
2020-04-23
Copy of rev.04 project as-is after Fredrik's conversion script.
Pavel V. Shatov (Meister)