user/shatov/alpha_rev04 - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2020-09-23	Cleaned up silkscreen, this was mostly about re-arranging component names to	Pavel V. Shatov (Meister)
	not cover footprints. As far as I understand, the problem was that KiCAD uses a different font than Altium, so component RefDes' got distorted a bit during conversion. _14.cleaned_up_silkscreen_maybe_need_script_to_reattach
2020-09-23	Doing some final polishing, added the "Open Source Hardware" logo I removed	Pavel V. Shatov (Meister)
	earlier while trying to repair forward annotation.
2020-09-23	Finished cleanup, fixed all pcbnew DRC errors reported. First attempt at	Pavel V. Shatov (Meister)
	generating Gerbers. The result is somewhat surprising, since each Gerber is huge (10MB+). This turned out to be related to the way KiCAD fills copper polygons. Version 5.1.x that I use has support for some better pouring algorithm, while the 4.x version Fredrik used at the time of conversion had some different and obviously inferior pouring algorithm. I updated all the shapes to use the newer fill algorithm and this helped a bit, but didn't entirely solve the problem. Internal layers with large planes still produce very large Gerbers (~1MB), but they're more or less manageable now. Further research indicates there currently seems to be no way of further reducing Gerbers, see eg.: https://forum.kicad.info/t/gerber-files-are-too-large-due-to-thousands-of-drawn-features/17750
2020-09-23	Renamed schematics sheets for consistency.	Pavel V. Shatov (Meister)

2020-09-23	Finishing cleanup. Fixed schematics DRC errors (mostly missing NC flags on some	Pavel V. Shatov (Meister)
	of the pins of the newly added componets). Also updated pages to show "rev.04", not "rev.02"
2020-09-23	Did some cleanup, also had to re-route VCC_PLL for iCE40.	Pavel V. Shatov (Meister)

2020-09-23	Entirely routed the design. Not useable right now, so far just reports zero	Pavel V. Shatov (Meister)
	unrouted nets. Will cleanup next.
2020-09-23	Intermediate step, re-routing the design according to the changes in schematics.	Pavel V. Shatov (Meister)

2020-09-23	Almost finished doing edits to schematics. Added Lattice iCE40 UltraPlus FPGA	Pavel V. Shatov (Meister)
	along with it's power subsystem and programming circuitry.
2020-09-23	Continued doing edits. Removed AVR tiny tamper detection processor.	Pavel V. Shatov (Meister)

2020-09-23	Started editing the design. So far removed the old MKM component.	Pavel V. Shatov (Meister)

2020-09-23	Forward annotation (eeschema -> pcbnew) is now FULLY OPERATIONAL! Hoorah!	Pavel V. Shatov (Meister)

2020-09-23	Turns out multi-part components were not fully converted and were not	Pavel V. Shatov (Meister)
	recognized properly during forward annotation. Had to do a couple of experiments to figure out how KiCAD handles this and then write some quick and dirty scripts to repair the multi-part symbols (STM32, Artix-7 and the 74_244 logic buffer were affected).
2020-09-23	Fixed PCB footprint references. Basically had to just replace dashes with	Pavel V. Shatov (Meister)
	underscores.
2020-09-23	Initial project cleanup	Pavel V. Shatov (Meister)

2020-05-25	Internal ground layers OK.	Pavel V. Shatov (Meister)

2020-05-25	Bottom Layer OK	Pavel V. Shatov (Meister)

2020-05-25	Internal signal layer #2 cleaned up.	Pavel V. Shatov (Meister)

2020-05-25	Internal signal layer #1 cleaned up.	Pavel V. Shatov (Meister)

2020-05-11	Top (aka "Front") Layer OK	Pavel V. Shatov (Meister)

2020-05-11	Don't track autosave files	Pavel V. Shatov (Meister)

2020-05-11	Tweak gitignore	Pavel V. Shatov (Meister)

2020-04-23	Layer info.	Pavel V. Shatov (Meister)

2020-04-23	Don't track Gerber output.	Pavel V. Shatov (Meister)

2020-04-23	Copy of rev.04 project as-is after Fredrik's conversion script.	Pavel V. Shatov (Meister)