From 39cac7918987fc603dc54886e107af026583592e Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 15 Jan 2015 17:04:03 +0100 Subject: init --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c | 1338 ++++++++++++++++++++ 1 file changed, 1338 insertions(+) create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c new file mode 100644 index 0000000..b2912e3 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c @@ -0,0 +1,1338 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sai.c + * @author MCD Application Team + * @version V1.0.0 + * @date 18-February-2014 + * @brief SAI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Audio Interface (SAI) peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + The SAI HAL driver can be used as follow: + + (#) Declare a SAI_HandleTypeDef handle structure. + (#) Initialize the SAI low level resources by implement the HAL_SAI_MspInit() API: + (##) Enable the SAI interface clock. + (##) SAI pins configuration: + (+++) Enable the clock for the SAI GPIOs. + (+++) Configure these SAI pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT() + and HAL_SAI_Receive_IT() APIs): + (+++) Configure the SAI interrupt priority. + (+++) Enable the NVIC SAI IRQ handle. + + (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA() + and HAL_SAI_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream. + (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream. + + (#) Program the SAI Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_SAI_Init() function. + + -@- The specific SAI interrupts (FIFO request and Overrun underrun interrupt) + will be managed using the macros __SAI_ENABLE_IT() and __SAI_DISABLE_IT() + inside the transmit and receive process. + + [..] + (@) Make sure that either: + (+@) I2S PLL is configured or + (+@) SAI PLL is configured or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file. + + [..] + (@) In master TX mode: enabling the audio block immediately generates the bit clock + for the external slaves even if there is no data in the FIFO, However FS signal + generation is conditioned by the presence of data in the FIFO. + + [..] + (@) In master RX mode: enabling the audio block immediately generates the bit clock + and FS signal for the external slaves. + + [..] + (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior: + (+@) First bit Offset <= (SLOT size - Data size) + (+@) Data size <= SLOT size + (+@) Number of SLOT x SLOT size = Frame length + (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected. + + [..] + Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SAI_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SAI_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_SAI_Transmit_IT() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_SAI_Receive_IT() + (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback + (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_SAI_Transmit_DMA() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_SAI_Receive_DMA() + (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback + (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback + (+) Pause the DMA Transfer using HAL_SAI_DMAPause() + (+) Resume the DMA Transfer using HAL_SAI_DMAResume() + (+) Stop the DMA Transfer using HAL_SAI_DMAStop() + + *** SAI HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in USART HAL driver. + + (+) __HAL_SAI_ENABLE: Enable the SAI peripheral + (+) __HAL_SAI_DISABLE: Disable the SAI peripheral + (+) __HAL_SAI_ENABLE_IT : Enable the specified SAI interrupts + (+) __HAL_SAI_DISABLE_IT : Disable the specified SAI interrupts + (+) __HAL_SAI_GET_IT_SOURCE: Check if the specified SAI interrupt source is + enabled or disabled + (+) __HAL_SAI_GET_FLAG: Check whether the specified SAI flag is set or not + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup SAI + * @brief SAI HAL module driver + * @{ + */ + +#ifdef HAL_SAI_MODULE_ENABLED + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* SAI registers Masks */ +#define CR1_CLEAR_MASK ((uint32_t)0xFF07C010) +#define FRCR_CLEAR_MASK ((uint32_t)0xFFF88000) +#define SLOTR_CLEAR_MASK ((uint32_t)0x0000F020) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMAError(DMA_HandleTypeDef *hdma); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SAI_Private_Functions + * @{ + */ + +/** @defgroup SAI_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SAIx peripheral: + + (+) User must Implement HAL_SAI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SAI_Init() to configure the selected device with + the selected configuration: + (++) Mode (Master/slave TX/RX) + (++) Protocol + (++) Data Size + (++) MCLK Output + (++) Audio frequency + (++) FIFO Threshold + (++) Frame Config + (++) Slot Config + + (+) Call the function HAL_SAI_DeInit() to restore the default configuration + of the selected SAI peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SAI according to the specified parameters + * in the SAI_InitTypeDef and create the associated handle. + * @param hsai: SAI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) +{ + uint32_t tmpreg = 0; + uint32_t tmpclock = 0, tmp2clock = 0; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0; + /* This variable used to store the SAI_CK_x (value in Hz) */ + uint32_t saiclocksource = 0; + + /* Check the SAI handle allocation */ + if(hsai == NULL) + { + return HAL_ERROR; + } + + /* Check the SAI Block parameters */ + assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol)); + assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode)); + assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize)); + assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit)); + assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing)); + assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro)); + assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive)); + assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider)); + assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold)); + assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency)); + + /* Check the SAI Block Frame parameters */ + assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength)); + assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength)); + assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition)); + assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity)); + assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset)); + + /* Check the SAI Block Slot parameters */ + assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset)); + assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize)); + assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber)); + assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive)); + + if(hsai->State == HAL_SAI_STATE_RESET) + { + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_SAI_MspInit(hsai); + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* Disable the selected SAI peripheral */ + __HAL_SAI_DISABLE(hsai); + + /* SAI Block Configuration ------------------------------------------------------------*/ + /* SAI Block_x CR1 Configuration */ + /* Get the SAI Block_x CR1 value */ + tmpreg = hsai->Instance->CR1; + /* Clear MODE, PRTCFG, DS, LSBFIRST, CKSTR, SYNCEN, OUTDRIV, NODIV, and MCKDIV bits */ + tmpreg &= CR1_CLEAR_MASK; + /* Configure SAI_Block_x: Audio Protocol, Data Size, first transmitted bit, Clock strobing + edge, Synchronization mode, Output drive, Master Divider and FIFO level */ + /* Set PRTCFG bits according to Protocol value */ + /* Set DS bits according to DataSize value */ + /* Set LSBFIRST bit according to FirstBit value */ + /* Set CKSTR bit according to ClockStrobing value */ + /* Set SYNCEN bit according to Synchro value */ + /* Set OUTDRIV bit according to OutputDrive value */ + /* Set NODIV bit according to NoDivider value */ + tmpreg |= (uint32_t)(hsai->Init.Protocol | + hsai->Init.AudioMode | + hsai->Init.DataSize | + hsai->Init.FirstBit | + hsai->Init.ClockStrobing | + hsai->Init.Synchro | + hsai->Init.OutputDrive | + hsai->Init.NoDivider); + /* Write to SAI_Block_x CR1 */ + hsai->Instance->CR1 = tmpreg; + + /* SAI Block_x CR2 Configuration */ + /* Get the SAIBlock_x CR2 value */ + tmpreg = hsai->Instance->CR2; + /* Clear FTH bits */ + tmpreg &= ~(SAI_xCR2_FTH); + /* Configure the FIFO Level */ + /* Set FTH bits according to SAI_FIFOThreshold value */ + tmpreg |= (uint32_t)(hsai->Init.FIFOThreshold); + /* Write to SAI_Block_x CR2 */ + hsai->Instance->CR2 = tmpreg; + + /* SAI Block_x Frame Configuration -----------------------------------------*/ + /* Get the SAI Block_x FRCR value */ + tmpreg = hsai->Instance->FRCR; + /* Clear FRL, FSALL, FSDEF, FSPOL, FSOFF bits */ + tmpreg &= FRCR_CLEAR_MASK; + /* Configure SAI_Block_x Frame: Frame Length, Active Frame Length, Frame Synchronization + Definition, Frame Synchronization Polarity and Frame Synchronization Polarity */ + /* Set FRL bits according to SAI_FrameLength value */ + /* Set FSALL bits according to SAI_ActiveFrameLength value */ + /* Set FSDEF bit according to SAI_FSDefinition value */ + /* Set FSPOL bit according to SAI_FSPolarity value */ + /* Set FSOFF bit according to SAI_FSOffset value */ + tmpreg |= (uint32_t)((uint32_t)(hsai->FrameInit.FrameLength - 1) | + hsai->FrameInit.FSOffset | + hsai->FrameInit.FSDefinition | + hsai->FrameInit.FSPolarity | + (uint32_t)((hsai->FrameInit.ActiveFrameLength - 1) << 8)); + + /* Write to SAI_Block_x FRCR */ + hsai->Instance->FRCR = tmpreg; + + /* SAI Block_x SLOT Configuration ------------------------------------------*/ + /* Get the SAI Block_x SLOTR value */ + tmpreg = hsai->Instance->SLOTR; + /* Clear FBOFF, SLOTSZ, NBSLOT, SLOTEN bits */ + tmpreg &= SLOTR_CLEAR_MASK; + /* Configure SAI_Block_x Slot: First bit offset, Slot size, Number of Slot in + audio frame and slots activated in audio frame */ + /* Set FBOFF bits according to SAI_FirstBitOffset value */ + /* Set SLOTSZ bits according to SAI_SlotSize value */ + /* Set NBSLOT bits according to SAI_SlotNumber value */ + /* Set SLOTEN bits according to SAI_SlotActive value */ + tmpreg |= (uint32_t)(hsai->SlotInit.FirstBitOffset | + hsai->SlotInit.SlotSize | + hsai->SlotInit.SlotActive | + (uint32_t)((hsai->SlotInit.SlotNumber - 1) << 8)); + + /* Write to SAI_Block_x SLOTR */ + hsai->Instance->SLOTR = tmpreg; + + /* SAI Block_x Clock Configuration -----------------------------------------*/ + /* Check the Clock parameters */ + assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource)); + + /* SAI Block clock source selection */ + if(hsai->Instance == SAI1_Block_A) + { + __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource); + } + else + { + __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2)); + } + + /* VCO Input Clock value calculation */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) + { + /* In Case the PLL Source is HSI (Internal Clock) */ + vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* In Case the PLL Source is HSE (External Clock) */ + vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); + } + + /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */ + if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI) + { + /* Configure the PLLI2S division factor */ + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ + tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24; + saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ + tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1); + saiclocksource = saiclocksource/(tmpreg); + + } + else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S) + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24; + saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ + tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1); + saiclocksource = saiclocksource/(tmpreg); + } + else /* sConfig->ClockSource == SAI_CLKSource_Ext */ + { + /* Enable the External Clock selection */ + __HAL_RCC_I2SCLK(RCC_I2SCLKSOURCE_EXT); + + saiclocksource = EXTERNAL_CLOCK_VALUE; + } + + /* Configure Master Clock using the following formula : + MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS + FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256 + MCKDIV[3:0] = SAI_CK_x / FS * 512 */ + if(hsai->Init.NoDivider == SAI_MASTERDIVIDER_ENABLED) + { + /* (saiclocksource x 10) to keep Significant digits */ + tmpclock = (((saiclocksource * 10) / ((hsai->Init.AudioFrequency) * 512))); + + /* Get the result of modulo division */ + tmp2clock = (tmpclock % 10); + + /* Round result to the nearest integer*/ + if (tmp2clock > 8) + { + tmpclock = ((tmpclock / 10) + 1); + } + else + { + tmpclock = (tmpclock / 10); + } + /*Set MCKDIV value in CR1 register*/ + hsai->Instance->CR1 |= (tmpclock << 20); + + } + + /* Initialise the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State= HAL_SAI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the SAI peripheral. + * @param hsai: SAI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai) +{ + /* Check the SAI handle allocation */ + if(hsai == NULL) + { + return HAL_ERROR; + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_SAI_MspDeInit(hsai); + + /* Initialize the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State = HAL_SAI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief SAI MSP Init. + * @param hsai: SAI handle + * @retval None + */ +__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_MspInit could be implemented in the user file + */ +} + +/** + * @brief SAI MSP DeInit. + * @param hsai: SAI handle + * @retval None + */ +__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SAI_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SAI data + transfers. + + (+) There is two mode of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (+) Blocking mode functions are : + (++) HAL_SAI_Transmit() + (++) HAL_SAI_Receive() + (++) HAL_SAI_TransmitReceive() + + (+) No-Blocking mode functions with Interrupt are : + (++) HAL_SAI_Transmit_IT() + (++) HAL_SAI_Receive_IT() + (++) HAL_SAI_TransmitReceive_IT() + + (+) No-Blocking mode functions with DMA are : + (++) HAL_SAI_Transmit_DMA() + (++) HAL_SAI_Receive_DMA() + (++) HAL_SAI_TransmitReceive_DMA() + + (+) A set of Transfer Complete Callbacks are provided in No_Blocking mode: + (++) HAL_SAI_TxCpltCallback() + (++) HAL_SAI_RxCpltCallback() + (++) HAL_SAI_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits an amount of data in blocking mode. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint16_t* pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t timeout = 0x00; + + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + if(hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_TX; + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + while(Size > 0) + { + /* Wait the FIFO to be empty */ + /* Get timeout */ + timeout = HAL_GetTick() + Timeout; + while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FREQ) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(HAL_GetTick() >= timeout) + { + + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + } + hsai->Instance->DR = (*pData++); + Size--; + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in blocking mode. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t timeout = 0x00; + + if((pData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + if(hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_RX; + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Receive data */ + while(Size > 0) + { + /* Wait until RXNE flag is set */ + /* Get timeout */ + timeout = HAL_GetTick() + Timeout; + + while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FREQ) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(HAL_GetTick() >= timeout) + { + + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + } + + (*pData++) = hsai->Instance->DR; + Size--; + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits an amount of data in no-blocking mode with Interrupt. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size) +{ + if(hsai->State == HAL_SAI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + hsai->pTxBuffPtr = pData; + hsai->TxXferSize = Size; + hsai->TxXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_TX; + + /* Transmit data */ + hsai->Instance->DR = (*hsai->pTxBuffPtr++); + hsai->TxXferCount--; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + /* Enable FRQ and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, (SAI_IT_FREQ | SAI_IT_OVRUDR)); + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + + return HAL_OK; + } + else if(hsai->State == HAL_SAI_STATE_BUSY_TX) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Transmit data */ + hsai->Instance->DR = (*hsai->pTxBuffPtr++); + + hsai->TxXferCount--; + + if(hsai->TxXferCount == 0) + { + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, (SAI_IT_FREQ | SAI_IT_OVRUDR)); + + hsai->State = HAL_SAI_STATE_READY; + + HAL_SAI_TxCpltCallback(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in no-blocking mode with Interrupt. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size) +{ + if(hsai->State == HAL_SAI_STATE_READY) + { + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + hsai->pRxBuffPtr = pData; + hsai->RxXferSize = Size; + hsai->RxXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_RX; + + /* Enable TXE and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, (SAI_IT_FREQ | SAI_IT_OVRUDR)); + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else if(hsai->State == HAL_SAI_STATE_BUSY_RX) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Receive data */ + (*hsai->pRxBuffPtr++) = hsai->Instance->DR; + + hsai->RxXferCount--; + + if(hsai->RxXferCount == 0) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, (SAI_IT_FREQ | SAI_IT_OVRUDR)); + + hsai->State = HAL_SAI_STATE_READY; + HAL_SAI_RxCpltCallback(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the audio stream playing from the Media. + * @param hsai: SAI handle + * @retval None + */ +HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Pause the audio file playing by disabling the SAI DMA requests */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Resumes the audio stream playing from the Media. + * @param hsai: SAI handle + * @retval None + */ +HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Enable the SAI DMA requests */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + + /* If the SAI peripheral is still not enabled, enable it */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Resumes the audio stream playing from the Media. + * @param hsai: SAI handle + * @retval None + */ +HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Abort the SAI DMA Tx Stream */ + if(hsai->hdmatx != NULL) + { + HAL_DMA_Abort(hsai->hdmatx); + } + /* Abort the SAI DMA Rx Stream */ + if(hsai->hdmarx != NULL) + { + HAL_DMA_Abort(hsai->hdmarx); + } + + /* Disable SAI peripheral */ + __HAL_SAI_DISABLE(hsai); + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} +/** + * @brief Transmits an amount of data in no-blocking mode with DMA. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size) +{ + uint32_t *tmp; + + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + if(hsai->State == HAL_SAI_STATE_READY) + { + hsai->pTxBuffPtr = pData; + hsai->TxXferSize = Size; + hsai->TxXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_TX; + + /* Set the SAI Tx DMA Half transfert complete callback */ + hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt; + + /* Set the SAI TxDMA transfer complete callback */ + hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt; + + /* Set the DMA error callback */ + hsai->hdmatx->XferErrorCallback = SAI_DMAError; + + /* Enable the Tx DMA Stream */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hsai->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsai->Instance->DR, hsai->TxXferSize); + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Enable SAI Tx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in no-blocking mode with DMA. + * @param hsai: SAI handle + * @param pData: Pointer to data buffer + * @param Size: Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size) +{ + uint32_t *tmp; + + if((pData == NULL) || (Size == 0)) + { + return HAL_ERROR; + } + + if(hsai->State == HAL_SAI_STATE_READY) + { + hsai->pRxBuffPtr = pData; + hsai->RxXferSize = Size; + hsai->RxXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->State = HAL_SAI_STATE_BUSY_RX; + + /* Set the SAI Rx DMA Half transfert complete callback */ + hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt; + + /* Set the SAI Rx DMA transfert complete callback */ + hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt; + + /* Set the DMA error callback */ + hsai->hdmarx->XferErrorCallback = SAI_DMAError; + + /* Enable the Rx DMA Stream */ + tmp = (uint32_t*)&pData; + HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, *(uint32_t*)tmp, hsai->RxXferSize); + + /* Check if the SAI is already enabled */ + if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Enable SAI Rx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles SAI interrupt request. + * @param hsai: SAI handle + * @retval HAL status + */ +void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) +{ + uint32_t tmp1 = 0, tmp2 = 0; + + if(hsai->State == HAL_SAI_STATE_BUSY_RX) + { + tmp1 = __HAL_SAI_GET_FLAG(hsai, SAI_xSR_FREQ); + tmp2 = __HAL_SAI_GET_IT_SOURCE(hsai, SAI_IT_FREQ); + /* SAI in mode Receiver --------------------------------------------------*/ + if((tmp1 != RESET) && (tmp2 != RESET)) + { + HAL_SAI_Receive_IT(hsai, NULL, 0); + } + + tmp1 = __HAL_SAI_GET_FLAG(hsai, SAI_FLAG_OVRUDR); + tmp2 = __HAL_SAI_GET_IT_SOURCE(hsai, SAI_IT_OVRUDR); + /* SAI Overrun error interrupt occurred ----------------------------------*/ + if((tmp1 != RESET) && (tmp2 != RESET)) + { + /* Change the SAI error code */ + hsai->ErrorCode = HAL_SAI_ERROR_OVR; + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + /* Set the SAI state ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + HAL_SAI_ErrorCallback(hsai); + } + } + + if(hsai->State == HAL_SAI_STATE_BUSY_TX) + { + tmp1 = __HAL_SAI_GET_FLAG(hsai, SAI_xSR_FREQ); + tmp2 = __HAL_SAI_GET_IT_SOURCE(hsai, SAI_IT_FREQ); + /* SAI in mode Transmitter -----------------------------------------------*/ + if((tmp1 != RESET) && (tmp2 != RESET)) + { + HAL_SAI_Transmit_IT(hsai, NULL, 0); + } + + tmp1 = __HAL_SAI_GET_FLAG(hsai, SAI_FLAG_OVRUDR); + tmp2 = __HAL_SAI_GET_IT_SOURCE(hsai, SAI_IT_OVRUDR); + /* SAI Underrun error interrupt occurred ---------------------------------*/ + if((tmp1 != RESET) && (tmp2 != RESET)) + { + /* Change the SAI error code */ + hsai->ErrorCode = HAL_SAI_ERROR_UDR; + + /* Clear the SAI Underrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + /* Set the SAI state ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + HAL_SAI_ErrorCallback(hsai); + } + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param hsai: SAI handle + * @retval None + */ + __weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hsai: SAI handle + * @retval None + */ + __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_TxHalfCpltCallback could be implenetd in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param hsai: SAI handle + * @retval None + */ +__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hsai: SAI handle + * @retval None + */ +__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_RxCpltCallback could be implenetd in the user file + */ +} + +/** + * @brief SAI error callbacks. + * @param hsai: SAI handle + * @retval None + */ +__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SAI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** @defgroup SAI_Group3 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SAI state. + * @param hsai: SAI handle + * @retval HAL state + */ +HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai) +{ + return hsai->State; +} + +/** +* @brief Return the SAI error code +* @param hsai : pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for the specified SAI Block. +* @retval SAI Error Code +*/ +uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai) +{ + return hsai->ErrorCode; +} +/** + * @} + */ + +/** + * @brief DMA SAI transmit process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + uint32_t timeout = 0x00; + + SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent; + + if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) + { + hsai->TxXferCount = 0; + hsai->RxXferCount = 0; + + /* Disable SAI Tx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + + /* Set timeout: 10 is the max delay to send the remaining data in the SAI FIFO */ + timeout = HAL_GetTick() + 10; + + /* Wait until FIFO is empty */ + while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FLVL) != RESET) + { + /* Check for the Timeout */ + if(HAL_GetTick() >= timeout) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Change the SAI state */ + HAL_SAI_ErrorCallback(hsai); + } + } + + hsai->State= HAL_SAI_STATE_READY; + } + HAL_SAI_TxCpltCallback(hsai); +} + +/** + * @brief DMA SAI transmit process half complete callback + * @param hdma : DMA handle + * @retval None + */ +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_SAI_TxHalfCpltCallback(hsai); +} + +/** + * @brief DMA SAI receive process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) + { + /* Disable Rx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + hsai->RxXferCount = 0; + + hsai->State = HAL_SAI_STATE_READY; + } + HAL_SAI_RxCpltCallback(hsai); +} + +/** + * @brief DMA SAI receive process half complete callback + * @param hdma : DMA handle + * @retval None + */ +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; + + HAL_SAI_RxHalfCpltCallback(hsai); +} +/** + * @brief DMA SAI communication error callback. + * @param hdma: DMA handle + * @retval None + */ +static void SAI_DMAError(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + /* Set the SAI state ready to be able to start again the process */ + hsai->State= HAL_SAI_STATE_READY; + HAL_SAI_ErrorCallback(hsai); + + hsai->TxXferCount = 0; + hsai->RxXferCount = 0; +} + +/** + * @} + */ + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#endif /* HAL_SAI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3