From 39cac7918987fc603dc54886e107af026583592e Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 15 Jan 2015 17:04:03 +0100 Subject: init --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c | 414 +++++++++++++++++++++ 1 file changed, 414 insertions(+) create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c new file mode 100644 index 0000000..7e40104 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c @@ -0,0 +1,414 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_rng.c + * @author MCD Application Team + * @version V1.0.0 + * @date 18-February-2014 + * @brief RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The RNG HAL driver can be used as follows: + + (#) Enable the RNG controller clock using __RNG_CLK_ENABLE() macro. + (#) Activate the RNG peripheral using __HAL_RNG_ENABLE() macro. + (#) Wait until the 32 bit Random Number Generator contains a valid + random data using (polling/interrupt) mode. + (#) Get the 32 bit random number using HAL_RNG_GetRandomNumber() function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup RNG + * @brief RNG HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define RNG_TIMEOUT_VALUE 1000 +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RNG_Private_Functions + * @{ + */ + +/** @defgroup RNG_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the RNG according to the specified parameters + in the RNG_InitTypeDef and create the associated handle + (+) DeInitialize the RNG peripheral + (+) Initialize the RNG MSP + (+) DeInitialize RNG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RNG according to the specified + * parameters in the RNG_InitTypeDef and creates the associated handle. + * @param hrng: RNG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if(hrng == NULL) + { + return HAL_ERROR; + } + + if(hrng->State == HAL_RNG_STATE_RESET) + { + /* Init the low level hardware */ + HAL_RNG_MspInit(hrng); + } + + /* Enable the RNG Peripheral */ + __HAL_RNG_ENABLE(hrng); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the RNG peripheral. + * @param hrng: RNG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG peripheral state */ + if(hrng->State == HAL_RNG_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Disable the RNG Peripheral */ + __HAL_RNG_DISABLE(hrng); + + /* Set the RNG registers to their reset values */ + hrng->Instance->CR &= 0xFFFFFFF3; + hrng->Instance->SR &= 0xFFFFFF98; + hrng->Instance->DR &= 0x0; + + /* DeInit the low level hardware */ + HAL_RNG_MspDeInit(hrng); + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hrng); + + /* Return the function status */ + return HAL_OK; +} + +/** + * @brief Initializes the RNG MSP. + * @param hrng: RNG handle + * @retval None + */ +__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RNG_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the RNG MSP. + * @param hrng: RNG handle + * @retval None + */ +__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RNG_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RNG_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get the 32 bit Random number + (+) Get the 32 bit Random number with interrupt enabled + (+) Handle RNG interrupt request + + +@endverbatim + * @{ + */ + +/** + * @brief Returns a 32-bit random number. + * @note Each time the random number data is read the RNG_FLAG_DRDY flag + * is automatically cleared. + * @param hrng: RNG handle + * @retval 32-bit random number + */ +uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng) +{ + uint32_t random32bit = 0; + uint32_t timeout = 0; + + /* Process Locked */ + __HAL_LOCK(hrng); + + timeout = HAL_GetTick() + RNG_TIMEOUT_VALUE; + + /* Check if data register contains valid random data */ + while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + if(HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + /* Get a 32bit Random number */ + random32bit = hrng->Instance->DR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + /* Return the 32 bit random number */ + return random32bit; +} + +/** + * @brief Returns a 32-bit random number with interrupt enabled. + * @param hrng: RNG handle + * @retval 32-bit random number + */ +uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng) +{ + uint32_t random32bit = 0; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get a 32bit Random number */ + random32bit = hrng->Instance->DR; + + /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ + __HAL_RNG_ENABLE_IT(hrng); + + /* Return the 32 bit random number */ + return random32bit; +} + +/** + * @brief Handles RNG interrupt request. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User has + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_FLAG(). + * The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * @note In the case of a seed error, the generation of random numbers is + * interrupted as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit using __HAL_RNG_CLEAR_FLAG(), then disable and enable + * the RNG peripheral to reinitialize and restart the RNG. + * @param hrng: RNG handle + * @retval None + + */ +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) +{ + /* RNG clock error interrupt occured */ + if(__HAL_RNG_GET_FLAG(hrng, RNG_IT_CEI) != RESET) + { + HAL_RNG_ErrorCallback(hrng); + + /* Clear the clock error flag */ + __HAL_RNG_CLEAR_FLAG(hrng, RNG_IT_CEI); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + } + + /* RNG seed error interrupt occured */ + if(__HAL_RNG_GET_FLAG(hrng, RNG_IT_SEI) != RESET) + { + HAL_RNG_ErrorCallback(hrng); + + /* Clear the seed error flag */ + __HAL_RNG_CLEAR_FLAG(hrng, RNG_IT_SEI); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + } + + /* Check RNG data ready flag */ + if(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) != RESET) + { + /* Data Ready callback */ + HAL_RNG_ReadyCallback(hrng); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Clear the RNG Data Ready flag */ + __HAL_RNG_CLEAR_FLAG(hrng, RNG_FLAG_DRDY); + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + } +} + +/** + * @brief Data Ready callback in non-blocking mode. + * @param hrng: RNG handle + * @retval None + */ + +__weak void HAL_RNG_ReadyCallback(RNG_HandleTypeDef* hrng) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RNG_ReadyCallback could be implemented in the user file + */ +} + +/** + * @brief RNG error callbacks. + * @param hrng: RNG handle + * @retval None + */ +__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RNG_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RNG_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the RNG state. + * @param hrng: RNG handle + * @retval HAL state + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng) +{ + return hrng->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + -- cgit v1.2.3