From 39cac7918987fc603dc54886e107af026583592e Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 15 Jan 2015 17:04:03 +0100 Subject: init --- .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h | 362 +++++++++++++++++++++ 1 file changed, 362 insertions(+) create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h (limited to 'Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h') diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h new file mode 100644 index 0000000..a8533c9 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h @@ -0,0 +1,362 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash.h + * @author MCD Application Team + * @version V1.0.0 + * @date 18-February-2014 + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_FLASH_H +#define __STM32F4xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** + * @brief FLASH Error structure definition + */ +typedef enum +{ + FLASH_ERROR_RD = 0x01, + FLASH_ERROR_PGS = 0x02, + FLASH_ERROR_PGP = 0x04, + FLASH_ERROR_PGA = 0x08, + FLASH_ERROR_WRP = 0x10, + FLASH_ERROR_OPERATION = 0x20 +}FLASH_ErrorTypeDef; + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0, + FLASH_PROC_SECTERASE, + FLASH_PROC_MASSERASE, + FLASH_PROC_PROGRAM +} FLASH_ProcedureTypeDef; + + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ + + __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ + + __IO uint8_t VoltageForErase; /*Internal variable to provide voltange range selected by user in IT context*/ + + __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ + + __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ + + __IO uint32_t Address; /*Internal variable to save address selected for program*/ + + HAL_LockTypeDef Lock; /* FLASH locking object */ + + __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */ + +}FLASH_ProcessTypeDef; + +/** + * @brief FLASH Error source + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + + + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */ +#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */ +#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */ +#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */ + +#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \ + ((VALUE) == TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == TYPEPROGRAM_WORD) || \ + ((VALUE) == TYPEPROGRAM_DOUBLEWORD)) + +/** + * @} + */ + +/** @defgroup FLASH_Flag_definition FLASH Flag definition + * @brief Flag definition + * @{ + */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ +#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ +#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ +#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */ +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */ + +/** + * @} + */ + +/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism + * @{ + */ +#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000) +#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100) +#define FLASH_PSIZE_WORD ((uint32_t)0x00000200) +#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300) +#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) +/** + * @} + */ + +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define RDP_KEY ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) +#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B) +#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F) +/** + * @} + */ + +/** + * @brief ACR register byte 0 (Bits[7:0]) base address + */ +#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00) +/** + * @brief OPTCR register byte 0 (Bits[7:0]) base address + */ +#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14) +/** + * @brief OPTCR register byte 1 (Bits[15:8]) base address + */ +#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15) +/** + * @brief OPTCR register byte 2 (Bits[23:16]) base address + */ +#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16) +/** + * @brief OPTCR register byte 3 (Bits[31:24]) base address + */ +#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__: FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval none + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) + +/** + * @brief Enable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) + +/** + * @brief Disable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) + +/** + * @brief Resets the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_ICRST) + +/** + * @brief Resets the FLASH data Cache. + * @note This function must be used only when the data Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_DATA_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_DCRST) + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_ERR: Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_ERR: Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_EOP : FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR : FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) + * @arg FLASH_FLAG_BSY : FLASH Busy flag + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP : FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR : FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) + +/* Include FLASH HAL Extension module */ +#include "stm32f4xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/* Program operation functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); + +/* Peripheral State functions ************************************************/ +FLASH_ErrorTypeDef HAL_FLASH_GetError(void); + +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3