From 39cac7918987fc603dc54886e107af026583592e Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 15 Jan 2015 17:04:03 +0100 Subject: init --- .../CMSIS/Device/ST/STM32F4xx/Release_Notes.html | 311 +++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 Drivers/CMSIS/Device/ST/STM32F4xx/Release_Notes.html (limited to 'Drivers/CMSIS/Device/ST/STM32F4xx/Release_Notes.html') diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Release_Notes.html b/Drivers/CMSIS/Device/ST/STM32F4xx/Release_Notes.html new file mode 100644 index 0000000..405471d --- /dev/null +++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Release_Notes.html @@ -0,0 +1,311 @@ + + + + + + + + + + + + + +Release Notes for STM32F4xx CMSIS + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F4xx CMSIS

+

Copyright 2014 STMicroelectronics

+

+
+

 

+ + + + + + +
+ +

Update History

+

V2.0.0 / 18-February-2014

+ + + + + + + + + + + + + + + + + + + + +

Main +Changes

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

+ + + + + + + +
    +
  • Update +based on STM32Cube specification
    +
  • This version has to be used only with STM32CubeF4 based development
  • +
+

V1.3.0 / 08-November-2013

+ +

Main +Changes

+ +
    +
  • + +

    Add +support of STM32F401xExx devices

  • Update startup files "startup_stm32f401xx.s" for EWARM, MDK-ARM, TrueSTUDIO and Ride toolchains: Add SPI4 interrupt handler entry in the vector table +
  • +
+

V1.2.1 / +19-September-2013

+ +

Main +Changes

+ +
    +
  • + +

    system_stm32f4xx.c : Update FMC SDRAM configuration (RBURST mode activation)

  • Update startup files "startup_stm32f427_437xx.s" and "startup_stm32f429_439xx.s"  for TrueSTUDIO and Ride toolchains and maintain the old name of startup files for legacy purpose +
  • +
+

V1.2.0 / +11-September-2013

+ +

Main +Changes

+ +
    +
  • + +

    Add +support of STM32F429/439xx and STM32F401xCxx devices

  • Update definition of STM32F427/437xx devices : extension +of the features to include system clock up to 180MHz, dual bank Flash, reduced +STOP Mode current, SAI, PCROP, SDRAM and DMA2D
  • stm32f4xx.h
    +
    • Add the following device defines :
      • "#define STM32F40_41xxx" for all STM32405/415/407/417xx devices
      • "#define STM32F427_437xx" for all STM32F427/437xx devices
      • "#define STM32F429_439xx" for all STM32F429/439xx devices
      • "#define STM32F401xx" for all STM32F401xx devices
    • Maintain the old device define for legacy purpose
    • Update IRQ handler enumeration structure to support all STM32F4xx Family devices.  
    +
  • Add new startup files "startup_stm32f40_41xxx.s","startup_stm32f427_437xx.s""startup_stm32f429_439xx.s" and "startup_stm32f401xx.s" for all toolchains and maintain the old name for startup files for legacy purpose +
  • system_stm32f4xx.c +
    • Update the system configuration to support all STM32F4xx Family devices.   +
  • +
+

V1.1.0 / +11-January-2013

+ +

Main +Changes

+ +
    +
  • Official release for STM32F427x/437x devices. +
  • stm32f4xx.h
    +
    • Update product define: replace +"#define STM32F4XX" by "#define STM32F40XX" for STM32F40x/41x devices +
    •  Add new product define: "#define +STM32F427X" for STM32F427x/437x devices.
    +
  • Add new startup files "startup_stm32f427x.s" for all toolchains +
  • rename startup files "startup_stm32f4xx.s" by "startup_stm32f40xx.s" for all toolchains +
  • system_stm32f4xx.c +
    • Prefetch Buffer enabled +
    • Add reference to STM32F427x/437x +devices and STM324x7I_EVAL board +
    • SystemInit_ExtMemCtl() +function
      +
      • Add configuration of missing FSMC +address and data lines
      +
      • Change memory type to SRAM instead +of PSRAM (PSRAM is available only on STM324xG-EVAL RevA) and update timing +values
  • +
+

V1.0.2 / 05-March-2012

+

Main +Changes

+ +
  • All source files: license disclaimer text update and add link to the License file on ST Internet.

V1.0.1 / 28-December-2011

Main +Changes

+
  • All source files: update disclaimer to add reference to the new license agreement
  • stm32f4xx.h
    • Correct bit definition: RCC_AHB2RSTR_HSAHRST changed to RCC_AHB2RSTR_HASHRST

V1.0.0 / 30-September-2011

Main +Changes

+
  • First official release for STM32F40x/41x devices
  • Add startup file for TASKING toolchain
  • system_stm32f4xx.c: driver's comments update

V1.0.0RC2 / 26-September-2011

Main +Changes

+
  • Official version (V1.0.0) Release Candidate2 for STM32F40x/41x devices
  • stm32f4xx.h
    • Add define for Cortex-M4 revision __CM4_REV
    • Correct RCC_CFGR_PPRE2_DIV16 bit (in RCC_CFGR register) value to 0x0000E000
    • Correct some bits definition to be in line with naming used in the Reference Manual (RM0090)
      • GPIO_OTYPER_IDR_x changed to GPIO_IDR_IDR_x
      • GPIO_OTYPER_ODR_x changed to GPIO_ODR_ODR_x
      • SYSCFG_PMC_MII_RMII changed to SYSCFG_PMC_MII_RMII_SEL
      • RCC_APB2RSTR_SPI1 changed to RCC_APB2RSTR_SPI1RST
      • DBGMCU_APB1_FZ_DBG_IWDEG_STOP changed to DBGMCU_APB1_FZ_DBG_IWDG_STOP
      • PWR_CR_PMODE changed to PWR_CR_VOS
      • PWR_CSR_REGRDY changed to PWR_CSR_VOSRDY
      • Add new define RCC_AHB1ENR_CCMDATARAMEN
      • Add new defines SRAM2_BASE, CCMDATARAM_BASE and BKPSRAM_BASE
    • GPIO_TypeDef structure: in the comment change AFR[2] address mapping to 0x20-0x24 instead of 0x24-0x28
  • system_stm32f4xx.c
    • SystemInit(): add code to enable the FPU
    • SetSysClock(): change PWR_CR_PMODE by PWR_CR_VOS
    • SystemInit_ExtMemCtl(): remove commented values
  • startup (for all compilers)
    • Delete code used to enable the FPU (moved to system_stm32f4xx.c file)
    • File’s header updated

V1.0.0RC1 / 25-August-2011

Main +Changes

+
  • Official version (V1.0.0) Release Candidate1 for STM32F4xx devices
+ +
    +
+

License

+Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met:
+
+
  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions +in binary form must reproduce the above copyright notice, this list of +conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived
    +
    +
+        from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ +
+
+
+

For +complete documentation on STM32 Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file -- cgit v1.2.3