//======================================================================
//
// tb_keywrap_mkm.v
// ----------------
// Testbench for the mkmif wrapper in keywrap.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2018, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module tb_keywrap_mkm();

  //----------------------------------------------------------------
  // Parameters.
  //----------------------------------------------------------------
  parameter DEBUG = 1;

  parameter CLK_HALF_PERIOD = 1;
  parameter CLK_PERIOD      = 2 * CLK_HALF_PERIOD;


  //----------------------------------------------------------------
  // Variables, regs and wires.
  //----------------------------------------------------------------
  integer cycle_ctr;
  integer error_ctr;
  integer tc_ctr;

  reg                            tb_clk;
  reg                            tb_reset_n;


  //----------------------------------------------------------------
  // Device Under Test.
  //----------------------------------------------------------------
  keywrap_mkmif dut(
                    .clk(tb_clk),
                    .reset_n(tb_reset_n),

                    .mkm_spi_sclk(),
                    .mkm_spi_cs_n(),
                    .mkm_spi_do(),
                    .mkm_spi_di(),

                    .init(),
                    .read(),
                    .write(),
                    .key_status(),
                    .ready(),

                    .wr_status(),
                    .rd_status(),
                    .wr_key(),
                    .rd_key
                   );


  //----------------------------------------------------------------
  // clk_gen
  //
  // Always running clock generator process.
  //----------------------------------------------------------------
  always
    begin : clk_gen
      #CLK_HALF_PERIOD;
      tb_clk = !tb_clk;
    end // clk_gen


  //----------------------------------------------------------------
  // sys_monitor()
  //
  // An always running process that creates a cycle counter and
  // conditionally displays information about the DUT.
  //----------------------------------------------------------------
  always
    begin : sys_monitor
      cycle_ctr = cycle_ctr + 1;

      #(CLK_PERIOD);
    end


  //----------------------------------------------------------------
  // init_sim()
  //
  // Initialize all counters and testbed functionality as well
  // as setting the DUT inputs to defined values.
  //----------------------------------------------------------------
  task init_sim;
    begin
      cycle_ctr = 0;
      error_ctr = 0;
      tc_ctr    = 0;

      tb_clk     = 1'h0;
      tb_reset_n = 1'h1

      #(CLK_PERIOD);
    end
  endtask // init_sim


  //----------------------------------------------------------------
  // main
  //----------------------------------------------------------------
  initial
    begin : main
      $display("   -= Testbench for Keywrap mkmif wrapper started =-");
      $display("    ================================================");
      $display("");

      init_sim();

      $display("");
      $display("*** Keywrap mkmif wrapper testbench done. ***");
      $finish;
    end // main

endmodule // tb_keywrap_mkm

//======================================================================
// EOF tb_keywrap_mkm.v
//======================================================================