diff options
| -rw-r--r-- | src/tb/tb_keywrap.v | 140 |
1 files changed, 135 insertions, 5 deletions
diff --git a/src/tb/tb_keywrap.v b/src/tb/tb_keywrap.v index f42d58f..29249ed 100644 --- a/src/tb/tb_keywrap.v +++ b/src/tb/tb_keywrap.v @@ -39,12 +39,73 @@ module tb_keywrap(); + parameter DEBUG = 0; + parameter CLK_HALF_PERIOD = 1; parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD; - integer cycle_ctr; - reg tb_sys_clk; - reg tb_reset_n; + // API for the core. + localparam ADDR_NAME0 = 8'h00; + localparam ADDR_NAME1 = 8'h01; + localparam ADDR_VERSION = 8'h02; + + localparam ADDR_CTRL = 8'h08; + localparam CTRL_INIT_BIT = 0; + localparam CTRL_NEXT_BIT = 1; + + localparam ADDR_STATUS = 8'h09; + localparam STATUS_READY_BIT = 0; + localparam STATUS_VALID_BIT = 1; + + localparam ADDR_CONFIG = 8'h0a; + localparam CTRL_ENCDEC_BIT = 0; + localparam CTRL_KEYLEN_BIT = 1; + + localparam ADDR_RLEN = 8'h0c; + localparam ADDR_A_LSB = 8'h0e; + localparam ADDR_A_MSB = 8'h0f; + + localparam ADDR_KEY0 = 8'h10; + localparam ADDR_KEY7 = 8'h17; + + localparam ADDR_WRITE_DATA = 8'h20; + + localparam ADDR_READ_DATA = 8'h30; + + + //---------------------------------------------------------------- + // Register and Wire declarations. + //---------------------------------------------------------------- + reg [31 : 0] cycle_ctr; + reg [31 : 0] error_ctr; + reg [31 : 0] tc_ctr; + + reg [31 : 0] read_data; + reg [127 : 0] result_data; + + reg tb_clk; + reg tb_reset_n; + reg tb_cs; + reg tb_we; + reg [7 : 0] tb_address; + reg [31 : 0] tb_write_data; + wire [31 : 0] tb_read_data; + wire tb_error; + + + //---------------------------------------------------------------- + // Device Under Test. + //---------------------------------------------------------------- + keywrap dut( + .clk(tb_clk), + .reset_n(tb_reset_n), + .cs(tb_cs), + .we(tb_we), + .address(tb_address), + .write_data(tb_write_data), + .read_data(tb_read_data), + .error(tb_error) + ); //---------------------------------------------------------------- @@ -55,7 +116,7 @@ module tb_keywrap(); always begin : clk_gen #CLK_HALF_PERIOD; - tb_sys_clk = !tb_sys_clk; + tb_clk = !tb_clk; end // clk_gen @@ -74,6 +135,75 @@ module tb_keywrap(); //---------------------------------------------------------------- + // read_word() + // + // Read a data word from the given address in the DUT. + // the word read will be available in the global variable + // read_data. + //---------------------------------------------------------------- + task read_word(input [11 : 0] address); + begin + tb_address = address; + tb_cs = 1; + tb_we = 0; + #(CLK_PERIOD); + read_data = tb_read_data; + tb_cs = 0; + + if (DEBUG) + begin + $display("*** Reading 0x%08x from 0x%02x.", read_data, address); + $display(""); + end + end + endtask // read_word + + + //---------------------------------------------------------------- + // write_word() + // + // Write the given word to the DUT using the DUT interface. + //---------------------------------------------------------------- + task write_word(input [11 : 0] address, + input [31 : 0] word); + begin + if (DEBUG) + begin + $display("*** Writing 0x%08x to 0x%02x.", word, address); + $display(""); + end + + tb_address = address; + tb_write_data = word; + tb_cs = 1; + tb_we = 1; + #(2 * CLK_PERIOD); + tb_cs = 0; + tb_we = 0; + end + endtask // write_word + + + //---------------------------------------------------------------- + // wait_ready + // + // Wait for the DUT to signal that the result is ready + //---------------------------------------------------------------- + task wait_ready; + begin : wait_ready + reg rdy; + rdy = 1'b0; + + while (rdy != 1'b1) + begin + read_word(ADDR_STATUS); + rdy = tb_read_data[STATUS_READY_BIT]; + end + end + endtask // wait_ready + + + //---------------------------------------------------------------- // init_sim() // // Initialize all counters and testbed functionality as well @@ -82,7 +212,7 @@ module tb_keywrap(); initial begin cycle_ctr = 0; - tb_sys_clk = 0; + tb_clk = 0; tb_reset_n = 0; #(CLK_PERIOD * 10); |