Adding initial version of repo and design for core implementing aes key wrap.

1 files changed, 78 insertions, 0 deletions

diff --git a/toolruns/mem.sim b/toolruns/mem.sim
new file mode 100755
index 0000000..96aff4a
--- /dev/null
+++ b/toolruns/mem.sim
@@ -0,0 +1,78 @@
+#! /usr/local/Cellar/icarus-verilog/HEAD/bin/vvp
+:ivl_version "11.0 (devel)" "(a1e0040)";
+:ivl_delay_selection "TYPICAL";
+:vpi_time_precision + 0;
+:vpi_module "system";
+:vpi_module "vhdl_sys";
+:vpi_module "v2005_math";
+:vpi_module "va_math";
+S_0x7ff56cd001b0 .scope module, "keywrap_mem" "keywrap_mem" 2 40;
+ .timescale 0 0;
+    .port_info 0 /INPUT 1 "sys_clk"
+    .port_info 1 /INPUT 1 "reset_n"
+o0x1004b5008 .functor BUFZ 1, C4<z>; HiZ drive
+v0x7ff56cd00620_0 .net "reset_n", 0 0, o0x1004b5008;  0 drivers
+o0x1004b5038 .functor BUFZ 1, C4<z>; HiZ drive
+v0x7ff56cd10660_0 .net "sys_clk", 0 0, o0x1004b5038;  0 drivers
+S_0x7ff56cd00340 .scope module, "tb_keywrap_mem" "tb_keywrap_mem" 3 40;
+ .timescale 0 0;
+P_0x7ff56cd004a0 .param/l "CLK_HALF_PERIOD" 0 3 42, +C4<00000000000000000000000000000001>;
+P_0x7ff56cd004e0 .param/l "CLK_PERIOD" 0 3 43, +C4<0000000000000000000000000000000000000000000000000000000000000010>;
+v0x7ff56cd10a80_0 .var/i "cycle_ctr", 31 0;
+v0x7ff56cd10b30_0 .var "tb_reset_n", 0 0;
+v0x7ff56cd10bd0_0 .var "tb_sys_clk", 0 0;
+S_0x7ff56cd10710 .scope begin, "clk_gen" "clk_gen" 3 56, 3 56 0, S_0x7ff56cd00340;
+ .timescale 0 0;
+S_0x7ff56cd108c0 .scope begin, "sys_monitor" "sys_monitor" 3 69, 3 69 0, S_0x7ff56cd00340;
+ .timescale 0 0;
+    .scope S_0x7ff56cd00340;
+T_0 ;
+    %fork t_1, S_0x7ff56cd10710;
+    %jmp t_0;
+    .scope S_0x7ff56cd10710;
+t_1 ;
+    %delay 1, 0;
+    %load/vec4 v0x7ff56cd10bd0_0;
+    %nor/r;
+    %store/vec4 v0x7ff56cd10bd0_0, 0, 1;
+    %end;
+    .scope S_0x7ff56cd00340;
+t_0 %join;
+    %jmp T_0;
+    .thread T_0;
+    .scope S_0x7ff56cd00340;
+T_1 ;
+    %fork t_3, S_0x7ff56cd108c0;
+    %jmp t_2;
+    .scope S_0x7ff56cd108c0;
+t_3 ;
+    %load/vec4 v0x7ff56cd10a80_0;
+    %addi 1, 0, 32;
+    %store/vec4 v0x7ff56cd10a80_0, 0, 32;
+    %delay 2, 0;
+    %end;
+    .scope S_0x7ff56cd00340;
+t_2 %join;
+    %jmp T_1;
+    .thread T_1;
+    .scope S_0x7ff56cd00340;
+T_2 ;
+    %pushi/vec4 0, 0, 32;
+    %store/vec4 v0x7ff56cd10a80_0, 0, 32;
+    %pushi/vec4 0, 0, 1;
+    %store/vec4 v0x7ff56cd10bd0_0, 0, 1;
+    %pushi/vec4 0, 0, 1;
+    %store/vec4 v0x7ff56cd10b30_0, 0, 1;
+    %delay 20, 0;
+    %pushi/vec4 1, 0, 1;
+    %store/vec4 v0x7ff56cd10b30_0, 0, 1;
+    %delay 20, 0;
+    %vpi_call 3 93 "$finish" {0 0 0};
+    %end;
+    .thread T_2;
+# The file index is used to find the file name in the following table.
+:file_names 4;
+    "N/A";
+    "<interactive>";
+    "../src/rtl/keywrap_mem.v";
+    "../src/tb/tb_keywrap_mem.v";