#===================================================================
#
# Makefile
# --------
# Makefile for building, simlating and programming the the fpga_mkm
# core. Note that the target device is a Lattice iCEstick
# Evaluation Kit.
#
#
# Author: Joachim Strombergson
# Copyright (c) 2019, NORDUnet A/S
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# - Redistributions of source code must retain the above copyright notice,
#   this list of conditions and the following disclaimer.
#
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
#
# - Neither the name of the NORDUnet nor the names of its contributors may
#   be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#===================================================================

# Project defines
PROJ      = fpga_mkm
BUILD     = ./build
DEVICE    = 1k
FOOTPRINT = tq144

TOP_SRC= ../src/rtl/fpga_mkm.v
TB_TOP_SRC = ../src/tb/tb_fpga_mkm.v
CONFIG_SRC= ../src/config/pinmap.pcf

CC = iverilog
CC_FLAGS = -Wall

LINT = verilator
LINT_FLAGS = +1364-2001ext+ --lint-only  -Wall -Wno-fatal -Wno-DECLFILENAME

.PHONY: all implement burn

all: top.sim

top.sim: $(TB_TOP_SRC) $(TOP_SRC)
	$(CC) $(CC_FLAGS) -o top.sim $(TB_TOP_SRC) $(TOP_SRC)


sim-top: top.sim
	./top.sim


lint:  $(TOP_SRC)
	$(LINT) $(LINT_FLAGS) $(TOP_SRC)


clean:
	rm -f *.sim
	rm build/*


implement: $(TOP_SRC)
	# if build folder doesn't exist, create it
	mkdir -p $(BUILD)
	# synthesize using Yosys
	yosys -p "synth_ice40 -top top -blif $(BUILD)/$(PROJ).blif" $(TOP_SRC)
	# Place and route using arachne
	arachne-pnr -d $(DEVICE) -P $(FOOTPRINT) -o $(BUILD)/$(PROJ).asc -p pinmap.pcf $(BUILD)/$(PROJ).blif
	# Convert to bitstream using IcePack
	icepack $(BUILD)/$(PROJ).asc $(BUILD)/$(PROJ).bin


burn:	$(PROJ).bin
	iceprog $(BUILD)/$(PROJ).bin


help:
	@echo "Build system for simulation of AES Verilog core"
	@echo ""
	@echo "Supported targets:"
	@echo "------------------"
	@echo "all:          Build all simulation targets."
	@echo "lint:         Lint all rtl source files."
	@echo "top.sim:      Build top level simulation target."
	@echo "sim-top:      Run top level simulation."
	@echo "implement:    Implement design for the FPGA."
	@echo "burn:         Write bitstream to FPGA config mem.."
	@echo "clean:        Delete all built files."

#===================================================================
# EOF Makefile
#===================================================================