#======================================================================
#
# pinmap_icestick.v
# -----------------
# Pinmap for the Lattice iCEstick Evaluation Kit (ICE40HX1K-STICK-EVN).
# Used for development of the FPGA based Master Key Memory (MKM).
#
#
# Author: Joachim Strombergson
# Copyright (c) 2019, NORDUnet A/S
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# - Redistributions of source code must retain the above copyright notice,
#   this list of conditions and the following disclaimer.
#
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
#
# - Neither the name of the NORDUnet nor the names of its contributors may
#   be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#======================================================================

# External clock source
set_io --warn-no-port clk 21

# j1 is the topmpost row of holes.
# I/Os from right to left.
set_io --warn-no-port j1_3  112
set_io --warn-no-port j1_4  113
set_io --warn-no-port j1_5  114
set_io --warn-no-port j1_6  115
set_io --warn-no-port j1_7  116
set_io --warn-no-port j1_8  117
set_io --warn-no-port j1_9  118
set_io --warn-no-port j1_10 119

# j2 is the pmod header.
#set_io --warn-no-port j2_1 78
#set_io --warn-no-port j2_2 79
#set_io --warn-no-port j2_3 80
#set_io --warn-no-port j2_4 81
#set_io --warn-no-port j2_7 87
#set_io --warn-no-port j2_8 88
set_io --warn-no-port j2_9  90
set_io --warn-no-port j2_10 91

# fpga_mkm I/Os mapped to j2
set_io --warn-no-port tamper 87
set_io --warn-no-port alarm  88
set_io --warn-no-port sclk   78
set_io --warn-no-port mosi   79
set_io --warn-no-port miso   80


# j3 is the bottom row of holes.
# I/Os from right to left.
set_io --warn-no-port j3_3  62
set_io --warn-no-port j3_4  61
set_io --warn-no-port j3_5  60
set_io --warn-no-port j3_6  56
set_io --warn-no-port j3_7  48
set_io --warn-no-port j3_8  47
set_io --warn-no-port j3_9  45
set_io --warn-no-port j3_10 44

# The five board LEDs.
set_io --warn-no-port gled5 95
set_io --warn-no-port rled1 99
set_io --warn-no-port rled2 98
set_io --warn-no-port rled3 97
set_io --warn-no-port rled4 96

set_io --warn-no-port ir_rx 106
set_io --warn-no-port ir_tx 105
set_io --warn-no-port ir_sd 107


#======================================================================
# EOF pinmap_icestick.v
#======================================================================