From 8dd5dd6b3992a6b6e72dc97bdf947c0746b6bf20 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Fri, 17 Jul 2015 10:36:18 +0200 Subject: init --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c | 339 +++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c new file mode 100644 index 0000000..26b312a --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_crc.c + * @author MCD Application Team + * @version V1.1.0 + * @date 19-June-2014 + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRC HAL driver can be used as follows: + + (#) Enable CRC AHB clock using __CRC_CLK_ENABLE(); + + (#) Use HAL_CRC_Accumulate() function to compute the CRC value of + a 32-bit data buffer using combination of the previous CRC value + and the new one. + + (#) Use HAL_CRC_Calculate() function to compute the CRC Value of + a new 32-bit data buffer. This function resets the CRC computation + unit before starting the computation to avoid getting wrong CRC values. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** @defgroup CRC_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP + (+) DeInitialize CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRC according to the specified + * parameters in the CRC_InitTypeDef and creates the associated handle. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if(hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if(hcrc->State == HAL_CRC_STATE_RESET) + { + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the CRC peripheral. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if(hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the CRC MSP. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Compute the 32-bit CRC value of 32-bit data buffer, + using combination of the previous CRC value and the new one. + (+) Compute the 32-bit CRC value of 32-bit data buffer, + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Computes the 32-bit CRC of 32-bit data buffer using combination + * of the previous CRC value and the new one. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + /* Process Locked */ + __HAL_LOCK(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Enter Data to the CRC calculator */ + for(index = 0; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Computes the 32-bit CRC of 32-bit data buffer independently + * of the previous CRC value. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @param pBuffer: Pointer to the buffer containing the data to be computed + * @param BufferLength: Length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + /* Process Locked */ + __HAL_LOCK(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Enter Data to the CRC calculator */ + for(index = 0; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +/** @defgroup CRC_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the CRC state. + * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains + * the configuration information for CRC + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) +{ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3