From e8c6f2b8aa1bd65bfe8d431ecf7358f12f5bf981 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 10 Dec 2015 21:23:45 +0100 Subject: init, code testing the RTC on the dev-bridge board --- src/rtc-test/Makefile | 49 ++++ src/rtc-test/include/stm-uart.h | 16 ++ src/rtc-test/include/stm32f4xx_hal_conf.h | 401 ++++++++++++++++++++++++++++++ src/rtc-test/include/stm32f4xx_it.h | 57 +++++ src/rtc-test/include/stm_init.h | 17 ++ src/rtc-test/src/main.c | 184 ++++++++++++++ src/rtc-test/src/stm-uart.c | 109 ++++++++ src/rtc-test/src/stm32f4xx_hal_msp.c | 126 ++++++++++ src/rtc-test/src/stm32f4xx_it.c | 54 ++++ src/rtc-test/src/stm_init.c | 199 +++++++++++++++ 10 files changed, 1212 insertions(+) create mode 100644 src/rtc-test/Makefile create mode 100644 src/rtc-test/include/stm-uart.h create mode 100644 src/rtc-test/include/stm32f4xx_hal_conf.h create mode 100644 src/rtc-test/include/stm32f4xx_it.h create mode 100644 src/rtc-test/include/stm_init.h create mode 100644 src/rtc-test/src/main.c create mode 100644 src/rtc-test/src/stm-uart.c create mode 100644 src/rtc-test/src/stm32f4xx_hal_msp.c create mode 100644 src/rtc-test/src/stm32f4xx_it.c create mode 100644 src/rtc-test/src/stm_init.c diff --git a/src/rtc-test/Makefile b/src/rtc-test/Makefile new file mode 100644 index 0000000..8af9dfc --- /dev/null +++ b/src/rtc-test/Makefile @@ -0,0 +1,49 @@ +# put your *.o targets here, make should handle the rest! +SRCS = main.c stm_init.c stm-uart.c stm32f4xx_it.c stm32f4xx_hal_msp.c + +# all the files will be generated with this name +PROJ_NAME=rtc-test + +TOPLEVEL=../.. +include $(TOPLEVEL)/common.mk + +OBJS = $(SRCS:.c=.o) + +################################################### + +.PHONY: lib proj + +all: lib proj + +lib: + $(MAKE) -C $(STD_PERIPH_LIB) STDPERIPH_SETTINGS="$(STDPERIPH_SETTINGS) -I $(PWD)/include" + +proj: $(PROJ_NAME).elf + +$(PROJ_NAME).elf: $(SRCS) + $(CC) $(CFLAGS) $^ -o $@ -L$(STD_PERIPH_LIB) -lstmf4 -L$(LDSCRIPT_INC) -T$(MCU_LINKSCRIPT) -g + $(OBJCOPY) -O ihex $(PROJ_NAME).elf $(PROJ_NAME).hex + $(OBJCOPY) -O binary $(PROJ_NAME).elf $(PROJ_NAME).bin + $(OBJDUMP) -St $(PROJ_NAME).elf >$(PROJ_NAME).lst + $(SIZE) $(PROJ_NAME).elf + +clean: + find ./ -name '*~' | xargs rm -f + rm -f *.o + rm -f $(PROJ_NAME).elf + rm -f $(PROJ_NAME).hex + rm -f $(PROJ_NAME).bin + rm -f $(PROJ_NAME).map + rm -f $(PROJ_NAME).lst + +really-clean: clean + $(MAKE) -C $(STD_PERIPH_LIB) clean + +debug: + $(GDB) -ex "target remote localhost:3333" \ + -ex "set remote hardware-breakpoint-limit 6" \ + -ex "set remote hardware-watchpoint-limit 4" $(PROJ_NAME).elf + +flash-target: + $(OPENOCD) -f $(OPENOCD_BOARD_DIR)/$(OPENOCD_PROC_FILE) \ + -c "program $(PROJ_NAME).elf verify reset" diff --git a/src/rtc-test/include/stm-uart.h b/src/rtc-test/include/stm-uart.h new file mode 100644 index 0000000..53682ac --- /dev/null +++ b/src/rtc-test/include/stm-uart.h @@ -0,0 +1,16 @@ +#ifndef __STM32_DEV_BRIDGE_UART_H +#define __STM32_DEV_BRIDGE_UART_H + +#include "stm32f4xx_hal.h" + +#define USART2_BAUD_RATE 921600 + +extern void uart_send_binary(uint32_t num, uint8_t bits); +extern void uart_send_string(char *s); +extern void uart_send_integer(uint32_t data, uint32_t mag); +extern void uart_send_hexbyte(const uint32_t data); +extern void uart_send_hexdump(const uint8_t *buf, const uint8_t start_offset, const uint8_t end_offset); + +extern UART_HandleTypeDef huart2; + +#endif /* __STM32_DEV_BRIDGE_UART_H */ diff --git a/src/rtc-test/include/stm32f4xx_hal_conf.h b/src/rtc-test/include/stm32f4xx_hal_conf.h new file mode 100644 index 0000000..dc8c5d9 --- /dev/null +++ b/src/rtc-test/include/stm32f4xx_hal_conf.h @@ -0,0 +1,401 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +//#define HAL_ADC_MODULE_ENABLED +//#define HAL_CAN_MODULE_ENABLED +//#define HAL_CRC_MODULE_ENABLED +//#define HAL_CRYP_MODULE_ENABLED +//#define HAL_DAC_MODULE_ENABLED +//#define HAL_DCMI_MODULE_ENABLED +//#define HAL_DMA2D_MODULE_ENABLED +//#define HAL_ETH_MODULE_ENABLED +//#define HAL_NAND_MODULE_ENABLED +//#define HAL_NOR_MODULE_ENABLED +//#define HAL_PCCARD_MODULE_ENABLED +//#define HAL_SRAM_MODULE_ENABLED +//#define HAL_SDRAM_MODULE_ENABLED +//#define HAL_HASH_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +//#define HAL_I2S_MODULE_ENABLED +//#define HAL_IWDG_MODULE_ENABLED +//#define HAL_LTDC_MODULE_ENABLED +//#define HAL_RNG_MODULE_ENABLED +//#define HAL_RTC_MODULE_ENABLED +//#define HAL_SAI_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +//#define HAL_SPI_MODULE_ENABLED +//#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +//#define HAL_USART_MODULE_ENABLED +//#define HAL_IRDA_MODULE_ENABLED +//#define HAL_SMARTCARD_MODULE_ENABLED +//#define HAL_WWDG_MODULE_ENABLED +//#define HAL_PCD_MODULE_ENABLED +//#define HAL_HCD_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/rtc-test/include/stm32f4xx_it.h b/src/rtc-test/include/stm32f4xx_it.h new file mode 100644 index 0000000..e5bfe85 --- /dev/null +++ b/src/rtc-test/include/stm32f4xx_it.h @@ -0,0 +1,57 @@ +/** + ****************************************************************************** + * @file stm32f4xx_it.h + * @date 08/07/2015 17:46:00 + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * + * COPYRIGHT(c) 2015 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_IT_H +#define __STM32F4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/rtc-test/include/stm_init.h b/src/rtc-test/include/stm_init.h new file mode 100644 index 0000000..b9dbd10 --- /dev/null +++ b/src/rtc-test/include/stm_init.h @@ -0,0 +1,17 @@ +#ifndef __STM_INIT_H +#define __STM_INIT_H + +#include "stm32f4xx_hal.h" + +#define LED_PORT GPIOJ +#define LED_RED GPIO_PIN_1 +#define LED_YELLOW GPIO_PIN_2 +#define LED_GREEN GPIO_PIN_3 +#define LED_BLUE GPIO_PIN_4 + +extern UART_HandleTypeDef huart2; +extern I2C_HandleTypeDef hi2c2; +extern void stm_init(void); +extern void Error_Handler(void); + +#endif /* __STM_INIT_H */ diff --git a/src/rtc-test/src/main.c b/src/rtc-test/src/main.c new file mode 100644 index 0000000..54730f6 --- /dev/null +++ b/src/rtc-test/src/main.c @@ -0,0 +1,184 @@ +/* + * Test code for the RTC. + * + * Dumps the SRAM and EEPROM on startup, then enables the oscillator. + * After that, the clock registers are read once a second - the first byte + * is seconds (and some control bits, so dont expect 0..59). + * + */ +#include + +#include "stm_init.h" +#include "stm-uart.h" + +#define DELAY() HAL_Delay(1000) + +#define RTC_ADDR 0xdf +#define EEPROM_ADDR 0xaf + +#define RTC_ADDR_W RTC_ADDR ^ 1 /* turn off LSB to write */ +#define EEPROM_ADDR_W EEPROM_ADDR ^ 1 /* turn off LSB to write */ + +#define SRAM_TOTAL_BYTES 0x5f +#define EEPROM_TOTAL_BYTES 0x7f + +#define EEPROM_EUI48_OFFSET 0xf0 +#define EEPROM_EUI48_BYTES 8 + +#define TIME_OFFSET 0x0 /* Time is at offest 0 in SRAM */ +#define TIME_BYTES 8 + + +uint8_t buf[1024]; +uint32_t i; + + +uint32_t device_ready(uint16_t i2c_addr) +{ + uart_send_string("Checking readiness of 0x"); + uart_send_hexbyte(i2c_addr); + uart_send_string("..."); + + i = HAL_I2C_IsDeviceReady (&hi2c2, i2c_addr, 10, 1000); + if (i == HAL_OK) { + uart_send_string("OK\r\n"); + return 1; + } + + uart_send_string("Not ready ("); + uart_send_integer(i, 0); + uart_send_string(")\r\n"); + + return 0; +} + + +void send_byte(const uint16_t i2c_addr, const uint8_t value) +{ + uint8_t ch = value; + + uart_send_string ("Sending "); + uart_send_hexbyte (ch); + uart_send_string (" to 0x"); + uart_send_hexbyte(i2c_addr); + uart_send_string("..."); + + while (HAL_I2C_Master_Transmit (&hi2c2, i2c_addr, &ch, 1, 1000) != HAL_OK) { + if (HAL_I2C_GetError (&hi2c2) != HAL_I2C_ERROR_AF) { + uart_send_string("Timeout\r\n"); + Error_Handler(); + } + } + + uart_send_string("OK\r\n"); +} + +void read_bytes (uint8_t *buf, const uint16_t i2c_addr, const uint8_t len) +{ + uart_send_string ("Reading "); + uart_send_integer (len, 0); + uart_send_string (" bytes from 0x"); + uart_send_hexbyte(i2c_addr); + uart_send_string("..."); + + while (HAL_I2C_Master_Receive (&hi2c2, i2c_addr, buf, len, 1000) != HAL_OK) { + if (HAL_I2C_GetError (&hi2c2) != HAL_I2C_ERROR_AF) { + uart_send_string("Timeout\r\n"); + Error_Handler(); + } + } + + uart_send_string("OK\r\n"); +} + +void request_data(uint8_t *buf, const uint16_t i2c_addr, const uint8_t offset, const uint8_t bytes) +{ + send_byte(i2c_addr, offset); + read_bytes(buf, i2c_addr, bytes); +} + +void print_time() +{ + request_data(buf, RTC_ADDR, TIME_OFFSET, TIME_BYTES); + + for (i = 0; i < TIME_BYTES; i++) { + uart_send_hexbyte(buf[i]); + uart_send_string(" "); + } +} + +void dump_sram() +{ + request_data(buf, RTC_ADDR, 0x0, SRAM_TOTAL_BYTES); + + uart_send_string("SRAM contents:\r\n"); + uart_send_hexdump(buf, 0, SRAM_TOTAL_BYTES); + + uart_send_string("\r\n"); +} + +void dump_eeprom() +{ + request_data(buf, EEPROM_ADDR, 0x0, EEPROM_TOTAL_BYTES); + + uart_send_string("EEPROM contents:\r\n"); + uart_send_hexdump(buf, 0, EEPROM_TOTAL_BYTES); + uart_send_string("\r\n"); + + request_data(buf, EEPROM_ADDR, EEPROM_EUI48_OFFSET, EEPROM_EUI48_BYTES); + uart_send_string("EEPROM EUI-48:\r\n"); + uart_send_hexdump(buf, EEPROM_EUI48_OFFSET, EEPROM_EUI48_BYTES); + + uart_send_string("\r\n"); +} + +void enable_oscillator() +{ + uart_send_string("Enabling oscillator...\r\n"); + + buf[0] = 0; /* Offset of RTCSEC */ + buf[1] = 1 << 7; /* datasheet REGISTERS 5-1, bit 7 = ST (start oscillator) */ + + while (HAL_I2C_Master_Transmit (&hi2c2, RTC_ADDR_W, buf, 2, 1000) != HAL_OK) { + if (HAL_I2C_GetError (&hi2c2) != HAL_I2C_ERROR_AF) { + uart_send_string("Timeout\r\n"); + Error_Handler(); + } + } + + uart_send_string("OK\r\n"); +} + + +int +main() +{ + stm_init(); + uart_send_string("\r\n\r\n*** Init done\r\n"); + + dump_sram(); + dump_eeprom(); + + enable_oscillator(); + + while (1) + { + memset(buf, 0, sizeof(buf)); + + if (! device_ready(RTC_ADDR)) { + goto fail; + } + + print_time(buf); + + uart_send_string("\r\n\r\n"); + + HAL_GPIO_TogglePin(LED_PORT, LED_GREEN); + DELAY(); + continue; + + fail: + HAL_GPIO_TogglePin(LED_PORT, LED_RED); + DELAY(); + } +} diff --git a/src/rtc-test/src/stm-uart.c b/src/rtc-test/src/stm-uart.c new file mode 100644 index 0000000..c98a889 --- /dev/null +++ b/src/rtc-test/src/stm-uart.c @@ -0,0 +1,109 @@ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" +#include "stm-uart.h" + +#include + +extern void Error_Handler(); + +UART_HandleTypeDef huart2; + + +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ + +inline void uart_putc(uint8_t *ch) { + HAL_UART_Transmit(&huart2, ch, 1, 0x1); +} + +void uart_send_binary(uint32_t num, uint8_t bits) +{ + uint32_t i; + unsigned char ch; + + bits--; /* bits 4 should give i = 1000, not 10000 */ + + i = 1 << bits; + while (i) { + ch = '0'; + if (num & i) { + ch = '1'; + } + + uart_putc(&ch); + i = i >> 1; + } +} + +void uart_send_string(char *s) +{ + HAL_UART_Transmit(&huart2, (uint8_t *) s, strlen(s), 0x1); +} + +void uart_send_integer(uint32_t data, uint32_t mag) { + uint32_t i, t; + unsigned char ch; + + if (! mag) { + /* Find magnitude */ + if (data < 10) { + ch = '0' + data; + HAL_UART_Transmit(&huart2, (uint8_t *) &ch, 1, 0x1); + return; + } + + for (mag = 10; mag < data; mag = i) { + i = mag * 10; + if (i > data || i < mag) + break; + } + } + /* mag is now 10 if data is 45, and 1000 if data is 1009 */ + for (i = mag; i; i /= 10) { + t = (data / i); + ch = '0' + t; + HAL_UART_Transmit(&huart2, (uint8_t *) &ch, 1, 0x1); + data -= (t * i); + } +} + +void uart_send_hexbyte(const uint32_t data) +{ + int i, j = 8; + uint8_t ch; + + while (j) { + j -= 4; + i = (data >> j) & 0x0f; + if (i > 9) { + ch = 'a' + i - 10; + uart_putc(&ch); + } else { + ch = '0' + i; + uart_putc(&ch); + } + } +} + +void uart_send_hexdump(const uint8_t *buf, const uint8_t start_offset, const uint8_t end_offset) +{ + uint32_t i; + + uart_send_string("00 -- "); + + for (i = 0; i <= end_offset; i++) { + if (i && (! (i % 16))) { + uart_send_string("\r\n"); + + if (i != end_offset) { + /* Output new offset unless the last byte is reached */ + uart_send_hexbyte(i); + uart_send_string(" -- "); + } + } + + uart_send_hexbyte(*(buf + i)); + uart_send_string(" "); + } +} diff --git a/src/rtc-test/src/stm32f4xx_hal_msp.c b/src/rtc-test/src/stm32f4xx_hal_msp.c new file mode 100644 index 0000000..5d07889 --- /dev/null +++ b/src/rtc-test/src/stm32f4xx_hal_msp.c @@ -0,0 +1,126 @@ +/** + ****************************************************************************** + * File Name : stm32f4xx_hal_msp.c + * Date : 08/07/2015 17:46:00 + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * + * COPYRIGHT(c) 2015 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" +#include "stm_init.h" + +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct; + int i; + + if (huart->Instance == USART2) { + /* Peripheral clock enable */ + __USART2_CLK_ENABLE(); + __GPIOA_CLK_ENABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + for (i = 0; i < 10; i++) { + HAL_GPIO_TogglePin(LED_PORT, LED_RED); + HAL_Delay(50); + } + } + +} + +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if (huart->Instance == USART2) { + /* Peripheral clock disable */ + __USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3); + } +} + +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + + GPIO_InitTypeDef GPIO_InitStruct; + if (hi2c->Instance == I2C2) { + /**I2C2 GPIO Configuration + //PF0 ------> I2C2_SDA + //PF1 ------> I2C2_SCL + + PH5 ------> I2C2_SDA + PH4 ------> I2C2_SCL + */ + + __GPIOH_CLK_ENABLE(); + + GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C2; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __I2C2_CLK_ENABLE(); + } + +} + +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + + if(hi2c->Instance==I2C2) { + /* Peripheral clock disable */ + __I2C2_CLK_DISABLE(); + + /**I2C2 GPIO Configuration + PF0 ------> I2C2_SDA + PF1 ------> I2C2_SCL + */ + HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1); + } +} + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/rtc-test/src/stm32f4xx_it.c b/src/rtc-test/src/stm32f4xx_it.c new file mode 100644 index 0000000..b816d0d --- /dev/null +++ b/src/rtc-test/src/stm32f4xx_it.c @@ -0,0 +1,54 @@ +/** + ****************************************************************************** + * @file stm32f4xx_it.c + * @date 08/07/2015 17:45:59 + * @brief Interrupt Service Routines. + ****************************************************************************** + * + * COPYRIGHT(c) 2015 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" +#include "stm32f4xx.h" +#include "stm32f4xx_it.h" + +/* External variables --------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ + +/** +* @brief This function handles System tick timer. +*/ +void SysTick_Handler(void) +{ + HAL_IncTick(); + HAL_SYSTICK_IRQHandler(); +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/rtc-test/src/stm_init.c b/src/rtc-test/src/stm_init.c new file mode 100644 index 0000000..9da39f8 --- /dev/null +++ b/src/rtc-test/src/stm_init.c @@ -0,0 +1,199 @@ +/** + ****************************************************************************** + * File Name : main.c + * Date : 08/07/2015 17:46:00 + * Description : Main program body + ****************************************************************************** + * + * COPYRIGHT(c) 2015 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm_init.h" +#include "stm-uart.h" +#include "stm32f4xx_hal.h" + +//UART_HandleTypeDef huart2; +I2C_HandleTypeDef hi2c2; + +/* Private variables ---------------------------------------------------------*/ +static GPIO_InitTypeDef GPIO_InitStruct; + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_I2C2_Init(void); +static void MX_USART2_UART_Init(void); + +void stm_init(void) +{ + + /* MCU Configuration----------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* Configure the system clock */ + SystemClock_Config(); + + /* System interrupt init*/ + /* Sets the priority grouping field */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0); + HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_I2C2_Init(); + MX_USART2_UART_Init(); +} + +/** System Clock Configuration + * + * HSE crystal at 25 MHz, end result is 180 MHz clock. + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + __PWR_CLK_ENABLE(); + + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 25; + RCC_OscInitStruct.PLL.PLLN = 360; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 4; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + HAL_PWREx_ActivateOverDrive(); + + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); +} + +/* I2C2 init function */ +void MX_I2C2_Init(void) +{ + + hi2c2.Instance = I2C2; + hi2c2.Init.ClockSpeed = 10000; + hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2; + hi2c2.Init.OwnAddress1 = 0; /* Will operate as Master */ + hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED; + hi2c2.Init.OwnAddress2 = 0; + hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED; + hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED; + + if (HAL_I2C_Init(&hi2c2) != HAL_OK) { + Error_Handler(); + } + + //HAL_I2C_Init(&hi2c2); +} + +/* USART2 init function */ +void MX_USART2_UART_Init(void) +{ + huart2.Instance = USART2; + huart2.Init.BaudRate = USART2_BAUD_RATE; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + + if (HAL_UART_Init(&huart2) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } +} + +/* LED init function */ +void MX_GPIO_Init(void) +{ + /* GPIO Ports Clock Enable */ + __GPIOJ_CLK_ENABLE(); + + /* Configure LED GPIO pins PJ1==red, PJ2==yellow, PJ3==green, PJ4==blue */ + GPIO_InitStruct.Pin = LED_RED | LED_YELLOW | LED_GREEN | LED_BLUE; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_LOW; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); +} + +/** + * @brief This function is executed in case of error occurrence. + * @param None + * @retval None + */ +void Error_Handler(void) +{ + HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET); + while (1) { ; } +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ + +} + +#endif + +/** + * @} + */ + +/** + * @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3