From 7e327732cf14d8f9a260aa87912de97d0ee88d22 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Joachim=20Stro=CC=88mbergson?= Date: Wed, 3 Dec 2014 17:54:03 +0100 Subject: Adding top level module. --- src/rtl/novena_trng.v | 217 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 src/rtl/novena_trng.v (limited to 'src') diff --git a/src/rtl/novena_trng.v b/src/rtl/novena_trng.v new file mode 100644 index 0000000..9d722b6 --- /dev/null +++ b/src/rtl/novena_trng.v @@ -0,0 +1,217 @@ +//====================================================================== +// +// novena_trng.v +// ------------- +// Cryptech TRNG for the Novena platform. +// This top level file is based on the novena_fpga design by +// Andrew "bunnie" Huang, see below. +// +// Author: Joachim Strombergson +// Copyright (c) 2014, SUNET +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// Copyright (c) 2013, Andrew "bunnie" Huang +// +// See the NOTICE file distributed with this work for additional +// information regarding copyright ownership. The copyright holder +// licenses this file to you under the Apache License, Version 2.0 +// (the "License"); you may not use this file except in compliance +// with the License. You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, +// code distributed under the License is distributed on an +// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +// KIND, either express or implied. See the License for the +// specific language governing permissions and limitations +// under the License. +////////////////////////////////////////////////////////////////////////////// + +/// note: must set "-g UnusedPin:Pullnone" to avoid conflicts with unused pins + +`timescale 1ns / 1ps + +module novena_trng( + // CPU side mapping + input wire [15:0] EIM_DA, + output reg EIM_A16, // relay of the trigger output + output reg EIM_A17, // relay of the trigger data (read path) + + // connector side mapping + //input wire F_LVDS_N3, // output of trigger + //input wire F_DX2, // output of trigger + //output wire F_LVDS_N5, // trigger reset + output wire F_LVDS_P4, // trigger reset + //inout wire F_LVDS_P5, // trigger data (bidir) + //input wire F_DX18, // trigger data in from sticker (DUT->CPU) + output wire F_LVDS_P11, // trigger data out to sticker (CPU->DUT) + //output wire F_LVDS_N8, // trigger clock + //output wire F_DX14, // trigger clock + + output wire F_LVDS_N7, // drive TPI data line + output wire F_LVDS_P7, // drive TPI signal lines + + output wire F_DX15, // 1 = drive 5V, 0 = drive 3V to DUT + + output wire F_LVDS_CK1_N, + output wire F_LVDS_CK1_P, + output wire F_LVDS_N11, + + output wire F_LVDS_N0, + output wire F_LVDS_P0, + // output wire F_DX1, + + output wire F_LVDS_N15, + output wire F_LVDS_P15, + output wire F_LVDS_NC, + + //input wire F_DX11, + + // Noise input ports. + // DX3 is for rev01 of the noise board + // DX7 is used for rev02 of the noise board + // DX15 is used fpr rev02 as non-schmitt triggered source + // input wire F_DX3, + input wire F_DX7, + + // Cryptech noise board v2 LEDs 00..07 + // are connected to these pins. + output wire F_DX0, + output wire F_DX3, + output wire F_DX2, + output wire F_DX11, + output wire F_DX1, + output wire F_DX17, + output wire F_DX14, + output wire F_DX18, + + input wire CLK2_N, + input wire CLK2_P, + output wire FPGA_LED2, + + input wire I2C3_SCL, + inout wire I2C3_SDA, + + input wire RESETBMCU, + // output wire F_DX17, // dummy + output wire APOPTOSIS + ); + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + wire clk; + + wire [7 : 0] test_debug; + + IBUFGDS clkibufgds( + .I(CLK2_P), + .IB(CLK2_N), + .O(clk) + ); + + //---------------------------------------------------------------- + // Assignments. + //---------------------------------------------------------------- + assign FPGA_LED2 = test_debug[0]; + + // Assign LEDs to debug + assign F_DX0 = test_debug[0]; + assign F_DX3 = test_debug[1]; + assign F_DX2 = test_debug[2]; + assign F_DX11 = test_debug[3]; + assign F_DX1 = test_debug[4]; + assign F_DX17 = test_debug[5]; + assign F_DX14 = test_debug[6]; + assign F_DX18 = test_debug[7]; + + assign APOPTOSIS = 1'b0; + assign F_DX15 = 1'b1; //+5V P_DUT + + // OE on bank to drive signals; signal not inverted in software + assign F_LVDS_P7 = !EIM_DA[3]; + // OE on bank to drive the data; signal not inverted in software + assign F_LVDS_N7 = !EIM_DA[4]; + assign F_LVDS_P4 = 1'b0; + assign F_LVDS_P11 = 1'b0; + assign F_LVDS_CK1_N = 1'b0; + assign F_LVDS_CK1_P = 1'b0; + assign F_LVDS_N11 = 1'b0; + assign F_LVDS_N0 = 1'b0; + assign F_LVDS_P0 = 1'b0; + // assign F_DX1 = 1'b0; + assign F_LVDS_N15 = 1'b0; + assign F_LVDS_P15 = 1'b0; + assign F_LVDS_NC = 1'b0; + + + //////////////////////////////////// + ///// I2C register set + //////////////////////////////////// + wire SDA_pd; + wire SDA_int; + reg clk25; + + initial begin + clk25 <= 1'b0; + end + + always @ (posedge clk) begin + clk25 <= ~clk25; + EIM_A16 <= 1'b0; + EIM_A17 <= 1'b0; + end + + IOBUF #( + .DRIVE(8), + .SLEW("SLOW") + ) IOBUF_sda ( + .IO(I2C3_SDA), + .I(1'b0), + .T(!SDA_pd), + .O(SDA_int) + ); + + coretest_trng coretest_trng_inst( + .clk(clk25), + .reset_n(1'b1), + + .noise(F_DX7), + .debug(test_debug), + .SCL(I2C3_SCL), + .SDA(SDA_int), + .SDA_pd(SDA_pd) + ); + +endmodule // novena_trng + +//====================================================================== +// EOF novena_trng.v +//====================================================================== -- cgit v1.2.3