`timescale 1ns / 1ps

module novena_baseline_top
	(
		gclk_p_pin, gclk_n_pin,

		eim_bclk, eim_cs0_n, eim_da,
		eim_lba_n, eim_wr_n,
		eim_oe_n, eim_wait_n,

		reset_mcu_b_pin,
		apoptosis_pin,
		led_pin
	);
	
		//
		// Top-Levl Ports
		//
	input		wire				gclk_p_pin;			// general-purpose 50 MHz LVDS clock 
	input		wire				gclk_n_pin;			//

	input		wire				eim_bclk;			// burst clock from cpu
	input		wire				eim_cs0_n;			// chip select (active low)
	inout		wire	[15: 0]	eim_da;				// bi-directional address/data bus
	input		wire				eim_lba_n;			// latch address signal (active low)
	input		wire				eim_wr_n;			// write enable signal (active low)
	input		wire				eim_oe_n;			// output enable signal (active low)
	output	wire				eim_wait_n;			// wait signal (active low)

	input		wire				reset_mcu_b_pin;	// this must be configured as input w/pullup
															// not to kill the cpu after configuration
	output	wire				apoptosis_pin;		// not used, tied to 0
	output	wire				led_pin;				// visual activity indicator
	

		//
		// Clock Manager
		//
		
		/* Clock manager is used to buffer BCLK and also generate SYS_CLK from GCLK. */
		
	wire	sys_clk;
	wire	sys_rst;
	
	wire	eim_bclk_buf;
	
	novena_clkmgr clkmgr
	(
		.gclk_p			(gclk_p_pin),
		.gclk_n			(gclk_n_pin),
		
		.reset_mcu_b	(reset_mcu_b_pin),
		
		.sys_clk			(sys_clk),
		.sys_rst			(sys_rst),
		
		.bclk_in			(eim_bclk),
		.bclk_out		(eim_bclk_buf)
	);
	
	
		//
		// EIM Arbiter
		//
		
		/* EIM arbiter handles EIM access and transfers it into `sys_clk' clock domain. */

	wire	[13: 0]	sys_eim_addr;
	wire				sys_eim_wr;
	wire				sys_eim_rd;
	wire	[31: 0]	sys_eim_dout;
	wire	[31: 0]	sys_eim_din;	

	eim_arbiter eim
	(
		.eim_bclk		(eim_bclk_buf),
		.eim_cs0_n		(eim_cs0_n),
		.eim_da			(eim_da),
		.eim_lba_n		(eim_lba_n),
		.eim_wr_n		(eim_wr_n),
		.eim_oe_n		(eim_oe_n),
		.eim_wait_n		(eim_wait_n),

		.sys_clk			(sys_clk),
		
		.sys_addr		(sys_eim_addr),
		.sys_wren		(sys_eim_wr),
		.sys_data_out	(sys_eim_dout),
		.sys_rden		(sys_eim_rd),
		.sys_data_in	(sys_eim_din)
	);
	
	
		//
		// Core Selector (MUX)
		//
		
		/* This multiplexor is used to map demo adder registers somewhere into EIM address space. */
		
	core_selector mux
	(
		.sys_clk			(sys_clk),
		.sys_rst			(sys_rst),
		
		.sys_eim_addr	(sys_eim_addr),
		.sys_eim_wr		(sys_eim_wr),
		.sys_eim_rd		(sys_eim_rd),
		
		.sys_eim_dout	(sys_eim_dout),
		.sys_eim_din	(sys_eim_din)
	);
	
	
		//
		// LED Driver
		//
	eim_indicator led
	(
		.sys_clk			(sys_clk),
		.sys_rst			(sys_rst),
		.eim_active		(sys_eim_wr | sys_eim_rd),
		.led_out			(led_pin)
	);
	
	
		//
		// Unused
		//
	assign apoptosis_pin		= 1'b0;
	
	
endmodule