#!/bin/sh # file: simulate_vcs.sh # # (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. # # This file contains confidential and proprietary information # of Xilinx, Inc. and is protected under U.S. and # international copyright and other intellectual property # laws. # # DISCLAIMER # This disclaimer is not a license and does not grant any # rights to the materials distributed herewith. Except as # otherwise provided in a valid license issued to you by # Xilinx, and to the maximum extent permitted by applicable # law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND # WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES # AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING # BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- # INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and # (2) Xilinx shall not be liable (whether in contract or tort, # including negligence, or under any other theory of # liability) for any loss or damage of any kind or nature # related to, arising under or in connection with these # materials, including for any direct, or any indirect, # special, incidental, or consequential loss or damage # (including loss of data, profits, goodwill, or any type of # loss or damage suffered as a result of any action brought # by a third party) even if such damage or loss was # reasonably foreseeable or Xilinx had been advised of the # possibility of the same. # # CRITICAL APPLICATIONS # Xilinx products are not designed or intended to be fail- # safe, or for use in any application requiring fail-safe # performance, such as life-support or safety devices or # systems, Class III medical devices, nuclear facilities, # applications related to the deployment of airbags, or any # other applications that could lead to death, personal # injury, or severe property or environmental damage # (individually and collectively, "Critical # Applications"). Customer assumes the sole risk and # liability of any use of Xilinx products in Critical # Applications, subject only to applicable laws and # regulations governing limitations on product liability. # # THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS # PART OF THIS FILE AT ALL TIMES. # # remove old files rm -rf simv* csrc DVEfiles AN.DB # compile all of the files # Note that -sverilog is not strictly required- You can # remove the -sverilog if you change the type of the # localparam for the periods in the testbench file to # [63:0] from time vlogan -sverilog \ clkmgr_dcm_tb.v \ ../../implement/results/routed.v # prepare the simulation vcs -sdf max:clkmgr_dcm_exdes:../../implement/results/routed.sdf +v2k -y $XILINX/verilog/src/simprims \ +libext+.v -debug clkmgr_dcm_tb.v ../../implement/results/routed.v # run the simulation ./simv -ucli -i ucli_commands.key # launch the viewer #dve -vpd vcdplus.vpd -session vcs_session.tcl