From b251321a08306c0c8954749c13178b869fc54b01 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Joachim=20Stro=CC=88mbergson?= Date: Fri, 6 Feb 2015 13:55:11 +0100 Subject: Adding a bit of test logic to see that the noise board is properly connected. --- rtl/src/verilog/novena_baseline_top.v | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) (limited to 'rtl/src/verilog') diff --git a/rtl/src/verilog/novena_baseline_top.v b/rtl/src/verilog/novena_baseline_top.v index 20bf28d..15e1be4 100644 --- a/rtl/src/verilog/novena_baseline_top.v +++ b/rtl/src/verilog/novena_baseline_top.v @@ -164,9 +164,37 @@ module novena_baseline_top // Cryptech Logic // // Logic specific to the Cryptech use of the Novena. - // Currently we just hard wire the LED outputs. + // Currently we just sample the noise and drive the LEDs + // with this signal. //---------------------------------------------------------------- - assign ct_avalanche_led = 8'h55; + reg ct_noise_sample0_reg; + reg ct_noise_sample1_reg; + reg [7 : 0] ct_led_reg; + + always @ (posedge sys_clk) + begin + if (sys_rst) + begin + ct_led_reg <= 8'h00; + ct_noise_sample0_reg <= 1'b0; + ct_noise_sample1_reg <= 1'b0; + end + else + begin + ct_noise_sample0_reg <= ct_avalanche_noise; + ct_noise_sample1_reg <= ct_noise_sample0_reg; + ct_led_reg[0] <= ct_noise_sample1_reg; + ct_led_reg[1] <= ct_noise_sample1_reg; + ct_led_reg[2] <= ct_noise_sample1_reg; + ct_led_reg[3] <= ct_noise_sample1_reg; + ct_led_reg[4] <= ct_noise_sample1_reg; + ct_led_reg[5] <= ct_noise_sample1_reg; + ct_led_reg[6] <= ct_noise_sample1_reg; + ct_led_reg[7] <= ct_noise_sample1_reg; + end + end + + assign ct_avalanche_led = ct_led_reg; //---------------------------------------------------------------- -- cgit v1.2.3