From d88592bf59eeb7263507f4d13a69aa841840bda7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Joachim=20Stro=CC=88mbergson?= <joachim@secworks.se>
Date: Sun, 1 Feb 2015 09:36:44 +0100
Subject: Added proper file headers to all verilog source files.

---
 rtl/src/verilog/demo_adder.v | 174 +++++++++++++++++++++++++++----------------
 1 file changed, 108 insertions(+), 66 deletions(-)

(limited to 'rtl/src/verilog/demo_adder.v')

diff --git a/rtl/src/verilog/demo_adder.v b/rtl/src/verilog/demo_adder.v
index a86f114..54e7f72 100644
--- a/rtl/src/verilog/demo_adder.v
+++ b/rtl/src/verilog/demo_adder.v
@@ -1,66 +1,108 @@
-`timescale 1ns / 1ps
-
-module demo_adder
-	(
-		clk, rst,
-		x, y, z,
-		ctl, sts
-	);
-	
-		//
-		// Ports
-		//
-	input		wire				clk;	// clock
-	input		wire				rst;	// reset
-	
-	input		wire	[31: 0]	x;		// x
-	input		wire	[31: 0]	y;		// y
-	output	wire	[31: 0]	z;		// z = x + y
-	
-	input		wire	[15: 0]	ctl;	// control
-	output	wire	[15: 0]	sts;	// status
-	
-	
-		//
-		// Internal Registers
-		//
-	reg	[31: 0]	z_reg		= {32{1'b0}};
-	reg	[15: 0]	sts_reg	= {16{1'b0}};
-	reg	[15: 0]	ctl_dly	= {16{1'b0}};
-	
-	assign z		= z_reg;
-	assign sts	= sts_reg;
-
-
-		//
-		// Control Logic
-		//
-	always @(posedge clk)
-		//
-		if (rst)	ctl_dly	<= {16{1'b0}};
-		else		ctl_dly	<= ctl;
-		
-		/* This flag is set whenever different value is written to control register. */
-		
-	wire	adder_go = (ctl != ctl_dly) ? 1'b1 : 1'b0;
-	
-	
-		//
-		// Adder Logic
-		//
-	always @(posedge clk)
-		//
-		if (rst)					z_reg	<= {32{1'b0}};
-		else if (adder_go)	z_reg	<= x + y;
-	
-
-		//
-		// Status Logic
-		//
-	always @(posedge clk)
-		//
-		if (rst)					sts_reg	<= {16{1'b0}};
-		else if (adder_go)	sts_reg	<= ctl;
-
-	
-endmodule
+//======================================================================
+//
+// demo_adder.v
+// ------------
+// Simple test core for the Cryptech Novena FPGA framework. The core
+// s a 32-bit adder that allows us to verfy that we can write registers
+// get a computation done and read out the registers via the EIM.
+//
+//
+// Author: Pavel Shatov
+// Copyright (c) 2014, NORDUnet A/S All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions
+// are met:
+// - Redistributions of source code must retain the above copyright
+//   notice, this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+//   notice, this list of conditions and the following disclaimer in the
+//   documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+//   be used to endorse or promote products derived from this software
+//   without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+module demo_adder
+	(
+		clk, rst,
+		x, y, z,
+		ctl, sts
+	);
+
+		//
+		// Ports
+		//
+	input		wire				clk;	// clock
+	input		wire				rst;	// reset
+
+	input		wire	[31: 0]	x;		// x
+	input		wire	[31: 0]	y;		// y
+	output	wire	[31: 0]	z;		// z = x + y
+
+	input		wire	[15: 0]	ctl;	// control
+	output	wire	[15: 0]	sts;	// status
+
+
+		//
+		// Internal Registers
+		//
+	reg	[31: 0]	z_reg		= {32{1'b0}};
+	reg	[15: 0]	sts_reg	= {16{1'b0}};
+	reg	[15: 0]	ctl_dly	= {16{1'b0}};
+
+	assign z		= z_reg;
+	assign sts	= sts_reg;
+
+
+		//
+		// Control Logic
+		//
+	always @(posedge clk)
+		//
+		if (rst)	ctl_dly	<= {16{1'b0}};
+		else		ctl_dly	<= ctl;
+
+		/* This flag is set whenever different value is written to control register. */
+
+	wire	adder_go = (ctl != ctl_dly) ? 1'b1 : 1'b0;
+
+
+		//
+		// Adder Logic
+		//
+	always @(posedge clk)
+		//
+		if (rst)					z_reg	<= {32{1'b0}};
+		else if (adder_go)	z_reg	<= x + y;
+
+
+		//
+		// Status Logic
+		//
+	always @(posedge clk)
+		//
+		if (rst)					sts_reg	<= {16{1'b0}};
+		else if (adder_go)	sts_reg	<= ctl;
+
+
+endmodule
+
+//======================================================================
+// EOF demo_adder.v
+//======================================================================
-- 
cgit v1.2.3