aboutsummaryrefslogtreecommitdiff
path: root/sw/test-sha256
diff options
context:
space:
mode:
Diffstat (limited to 'sw/test-sha256')
-rwxr-xr-xsw/test-sha256/Makefile19
-rw-r--r--sw/test-sha256/hash_tester.c876
-rw-r--r--sw/test-sha256/novena-eim.c407
-rw-r--r--sw/test-sha256/novena-eim.h297
-rw-r--r--sw/test-sha256/test-sha256.c179
5 files changed, 0 insertions, 1778 deletions
diff --git a/sw/test-sha256/Makefile b/sw/test-sha256/Makefile
deleted file mode 100755
index ee8536e..0000000
--- a/sw/test-sha256/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-all: test-sha256 hash_tester
-
-.c.o:
- gcc -c -Wall -o $@ $<
-
-test-sha256 : test-sha256.o novena-eim.o
- gcc -o test-sha256 test-sha256.o novena-eim.o
-
-test-sha256.o: test-sha256.c novena-eim.h
-
-hash_tester : hash_tester.o novena-eim.o
- gcc -o hash_tester hash_tester.o novena-eim.o
-
-hash_tester.o: hash_tester.c novena-eim.h
-
-novena-eim.o: novena-eim.c novena-eim.h
-
-clean:
- rm -f *.o test-adder test-sha256 hash_tester
diff --git a/sw/test-sha256/hash_tester.c b/sw/test-sha256/hash_tester.c
deleted file mode 100644
index 4fbeaa3..0000000
--- a/sw/test-sha256/hash_tester.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/*
- * hash_tester.c
- * --------------
- * This program sends several commands to the coretest_hashes subsystem
- * in order to verify the SHA-1, SHA-256 and SHA-512/x hash function
- * cores.
- *
- * Note: This version of the program talks to the FPGA over an EIM bus.
- *
- * The single and dual block test cases are taken from the
- * NIST KAT document:
- * http://csrc.nist.gov/groups/ST/toolkit/documents/Examples/SHA_All.pdf
- *
- *
- * Authors: Joachim Strömbergson, Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <arpa/inet.h>
-#include <ctype.h>
-#include <signal.h>
-
-#include "novena-eim.h"
-
-int debug = 0;
-int quiet = 0;
-int repeat = 0;
-
-/* instead of core number 0 we have a page of global registers */
-#define ADDR_GLOBAL_BOARD_TYPE EIM_BASE_ADDR + (0x00 << 2)
-#define ADDR_GLOBAL_BITSTREAM_VER EIM_BASE_ADDR + (0x01 << 2)
-#define ADDR_GLOBAL_DUMMY_REG EIM_BASE_ADDR + (0xFF << 2)
-
-#define SEGMENT_OFFSET_HASHES EIM_BASE_ADDR + 0x000000
-#define SEGMENT_OFFSET_RNGS EIM_BASE_ADDR + 0x010000
-#define SEGMENT_OFFSET_CIPHERS EIM_BASE_ADDR + 0x020000
-
-
-/* addresses and codes common to all hash cores */
-#define ADDR_NAME0 0x00
-#define ADDR_NAME1 0x04
-#define ADDR_VERSION 0x08
-#define ADDR_CTRL 0x20
-#define CTRL_INIT_CMD 1
-#define CTRL_NEXT_CMD 2
-#define ADDR_STATUS 0x24
-#define STATUS_READY_BIT 1
-#define STATUS_VALID_BIT 2
-#define ADDR_BLOCK 0x40
-#define ADDR_DIGEST 0x80
-
-#define HASH_CORE_SIZE 0x400
-
-/* addresses and codes for the specific hash cores */
-#define SHA1_ADDR_BASE EIM_BASE_ADDR + (1*HASH_CORE_SIZE)
-#define SHA1_ADDR_NAME0 SHA1_ADDR_BASE + ADDR_NAME0
-#define SHA1_ADDR_NAME1 SHA1_ADDR_BASE + ADDR_NAME1
-#define SHA1_ADDR_VERSION SHA1_ADDR_BASE + ADDR_VERSION
-#define SHA1_ADDR_CTRL SHA1_ADDR_BASE + ADDR_CTRL
-#define SHA1_ADDR_STATUS SHA1_ADDR_BASE + ADDR_STATUS
-#define SHA1_ADDR_BLOCK SHA1_ADDR_BASE + ADDR_BLOCK
-#define SHA1_ADDR_DIGEST SHA1_ADDR_BASE + ADDR_DIGEST
-#define SHA1_BLOCK_LEN 512 / 8
-#define SHA1_DIGEST_LEN 160 / 8
-
-#define SHA256_ADDR_BASE EIM_BASE_ADDR + (2*HASH_CORE_SIZE)
-#define SHA256_ADDR_NAME0 SHA256_ADDR_BASE + ADDR_NAME0
-#define SHA256_ADDR_NAME1 SHA256_ADDR_BASE + ADDR_NAME1
-#define SHA256_ADDR_VERSION SHA256_ADDR_BASE + ADDR_VERSION
-#define SHA256_ADDR_CTRL SHA256_ADDR_BASE + ADDR_CTRL
-#define SHA256_ADDR_STATUS SHA256_ADDR_BASE + ADDR_STATUS
-#define SHA256_ADDR_BLOCK SHA256_ADDR_BASE + ADDR_BLOCK
-#define SHA256_ADDR_DIGEST SHA256_ADDR_BASE + ADDR_DIGEST
-#define SHA256_BLOCK_LEN 512 / 8
-#define SHA256_DIGEST_LEN 256 / 8
-
-#define SHA512_ADDR_BASE EIM_BASE_ADDR + (3*HASH_CORE_SIZE)
-#define SHA512_ADDR_NAME0 SHA512_ADDR_BASE + ADDR_NAME0
-#define SHA512_ADDR_NAME1 SHA512_ADDR_BASE + ADDR_NAME1
-#define SHA512_ADDR_VERSION SHA512_ADDR_BASE + ADDR_VERSION
-#define SHA512_ADDR_CTRL SHA512_ADDR_BASE + ADDR_CTRL
-#define SHA512_ADDR_STATUS SHA512_ADDR_BASE + ADDR_STATUS
-#define SHA512_ADDR_BLOCK SHA512_ADDR_BASE + ADDR_BLOCK
-#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + 0x100
-#define SHA512_BLOCK_LEN 1024 / 8
-#define SHA512_224_DIGEST_LEN 224 / 8
-#define SHA512_256_DIGEST_LEN 256 / 8
-#define SHA384_DIGEST_LEN 384 / 8
-#define SHA512_DIGEST_LEN 512 / 8
-#define MODE_SHA_512_224 0 << 2
-#define MODE_SHA_512_256 1 << 2
-#define MODE_SHA_384 2 << 2
-#define MODE_SHA_512 3 << 2
-
-/* SHA-1/SHA-256 One Block Message Sample
- Input Message: "abc" */
-const uint8_t NIST_512_SINGLE[] =
-{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 };
-
-const uint8_t SHA1_SINGLE_DIGEST[] =
-{ 0xa9, 0x99, 0x3e, 0x36, 0x47, 0x06, 0x81, 0x6a,
- 0xba, 0x3e, 0x25, 0x71, 0x78, 0x50, 0xc2, 0x6c,
- 0x9c, 0xd0, 0xd8, 0x9d };
-
-const uint8_t SHA256_SINGLE_DIGEST[] =
-{ 0xBA, 0x78, 0x16, 0xBF, 0x8F, 0x01, 0xCF, 0xEA,
- 0x41, 0x41, 0x40, 0xDE, 0x5D, 0xAE, 0x22, 0x23,
- 0xB0, 0x03, 0x61, 0xA3, 0x96, 0x17, 0x7A, 0x9C,
- 0xB4, 0x10, 0xFF, 0x61, 0xF2, 0x00, 0x15, 0xAD };
-
-/* SHA-1/SHA-256 Two Block Message Sample
- Input Message: "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" */
-const uint8_t NIST_512_DOUBLE0[] =
-{ 0x61, 0x62, 0x63, 0x64, 0x62, 0x63, 0x64, 0x65,
- 0x63, 0x64, 0x65, 0x66, 0x64, 0x65, 0x66, 0x67,
- 0x65, 0x66, 0x67, 0x68, 0x66, 0x67, 0x68, 0x69,
- 0x67, 0x68, 0x69, 0x6A, 0x68, 0x69, 0x6A, 0x6B,
- 0x69, 0x6A, 0x6B, 0x6C, 0x6A, 0x6B, 0x6C, 0x6D,
- 0x6B, 0x6C, 0x6D, 0x6E, 0x6C, 0x6D, 0x6E, 0x6F,
- 0x6D, 0x6E, 0x6F, 0x70, 0x6E, 0x6F, 0x70, 0x71,
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-const uint8_t NIST_512_DOUBLE1[] =
-{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xC0 };
-
-const uint8_t SHA1_DOUBLE_DIGEST[] =
-{ 0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E,
- 0xBA, 0xAE, 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5,
- 0xE5, 0x46, 0x70, 0xF1 };
-
-const uint8_t SHA256_DOUBLE_DIGEST[] =
-{ 0x24, 0x8D, 0x6A, 0x61, 0xD2, 0x06, 0x38, 0xB8,
- 0xE5, 0xC0, 0x26, 0x93, 0x0C, 0x3E, 0x60, 0x39,
- 0xA3, 0x3C, 0xE4, 0x59, 0x64, 0xFF, 0x21, 0x67,
- 0xF6, 0xEC, 0xED, 0xD4, 0x19, 0xDB, 0x06, 0xC1 };
-
-/* SHA-512 One Block Message Sample
- Input Message: "abc" */
-const uint8_t NIST_1024_SINGLE[] =
-{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 };
-
-const uint8_t SHA512_224_SINGLE_DIGEST[] =
-{ 0x46, 0x34, 0x27, 0x0f, 0x70, 0x7b, 0x6a, 0x54,
- 0xda, 0xae, 0x75, 0x30, 0x46, 0x08, 0x42, 0xe2,
- 0x0e, 0x37, 0xed, 0x26, 0x5c, 0xee, 0xe9, 0xa4,
- 0x3e, 0x89, 0x24, 0xaa };
-const uint8_t SHA512_256_SINGLE_DIGEST[] =
-{ 0x53, 0x04, 0x8e, 0x26, 0x81, 0x94, 0x1e, 0xf9,
- 0x9b, 0x2e, 0x29, 0xb7, 0x6b, 0x4c, 0x7d, 0xab,
- 0xe4, 0xc2, 0xd0, 0xc6, 0x34, 0xfc, 0x6d, 0x46,
- 0xe0, 0xe2, 0xf1, 0x31, 0x07, 0xe7, 0xaf, 0x23 };
-const uint8_t SHA384_SINGLE_DIGEST[] =
-{ 0xcb, 0x00, 0x75, 0x3f, 0x45, 0xa3, 0x5e, 0x8b,
- 0xb5, 0xa0, 0x3d, 0x69, 0x9a, 0xc6, 0x50, 0x07,
- 0x27, 0x2c, 0x32, 0xab, 0x0e, 0xde, 0xd1, 0x63,
- 0x1a, 0x8b, 0x60, 0x5a, 0x43, 0xff, 0x5b, 0xed,
- 0x80, 0x86, 0x07, 0x2b, 0xa1, 0xe7, 0xcc, 0x23,
- 0x58, 0xba, 0xec, 0xa1, 0x34, 0xc8, 0x25, 0xa7 };
-const uint8_t SHA512_SINGLE_DIGEST[] =
-{ 0xdd, 0xaf, 0x35, 0xa1, 0x93, 0x61, 0x7a, 0xba,
- 0xcc, 0x41, 0x73, 0x49, 0xae, 0x20, 0x41, 0x31,
- 0x12, 0xe6, 0xfa, 0x4e, 0x89, 0xa9, 0x7e, 0xa2,
- 0x0a, 0x9e, 0xee, 0xe6, 0x4b, 0x55, 0xd3, 0x9a,
- 0x21, 0x92, 0x99, 0x2a, 0x27, 0x4f, 0xc1, 0xa8,
- 0x36, 0xba, 0x3c, 0x23, 0xa3, 0xfe, 0xeb, 0xbd,
- 0x45, 0x4d, 0x44, 0x23, 0x64, 0x3c, 0xe8, 0x0e,
- 0x2a, 0x9a, 0xc9, 0x4f, 0xa5, 0x4c, 0xa4, 0x9f };
-
-/* SHA-512 Two Block Message Sample
- Input Message: "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn"
- "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu" */
-const uint8_t NIST_1024_DOUBLE0[] =
-{ 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
- 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
- 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
- 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b,
- 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
- 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d,
- 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e,
- 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
- 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70,
- 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71,
- 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72,
- 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73,
- 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74,
- 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75,
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-const uint8_t NIST_1024_DOUBLE1[] =
-{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x80 };
-
-const uint8_t SHA512_224_DOUBLE_DIGEST[] =
-{ 0x23, 0xfe, 0xc5, 0xbb, 0x94, 0xd6, 0x0b, 0x23,
- 0x30, 0x81, 0x92, 0x64, 0x0b, 0x0c, 0x45, 0x33,
- 0x35, 0xd6, 0x64, 0x73, 0x4f, 0xe4, 0x0e, 0x72,
- 0x68, 0x67, 0x4a, 0xf9 };
-const uint8_t SHA512_256_DOUBLE_DIGEST[] =
-{ 0x39, 0x28, 0xe1, 0x84, 0xfb, 0x86, 0x90, 0xf8,
- 0x40, 0xda, 0x39, 0x88, 0x12, 0x1d, 0x31, 0xbe,
- 0x65, 0xcb, 0x9d, 0x3e, 0xf8, 0x3e, 0xe6, 0x14,
- 0x6f, 0xea, 0xc8, 0x61, 0xe1, 0x9b, 0x56, 0x3a };
-const uint8_t SHA384_DOUBLE_DIGEST[] =
-{ 0x09, 0x33, 0x0c, 0x33, 0xf7, 0x11, 0x47, 0xe8,
- 0x3d, 0x19, 0x2f, 0xc7, 0x82, 0xcd, 0x1b, 0x47,
- 0x53, 0x11, 0x1b, 0x17, 0x3b, 0x3b, 0x05, 0xd2,
- 0x2f, 0xa0, 0x80, 0x86, 0xe3, 0xb0, 0xf7, 0x12,
- 0xfc, 0xc7, 0xc7, 0x1a, 0x55, 0x7e, 0x2d, 0xb9,
- 0x66, 0xc3, 0xe9, 0xfa, 0x91, 0x74, 0x60, 0x39 };
-const uint8_t SHA512_DOUBLE_DIGEST[] =
-{ 0x8e, 0x95, 0x9b, 0x75, 0xda, 0xe3, 0x13, 0xda,
- 0x8c, 0xf4, 0xf7, 0x28, 0x14, 0xfc, 0x14, 0x3f,
- 0x8f, 0x77, 0x79, 0xc6, 0xeb, 0x9f, 0x7f, 0xa1,
- 0x72, 0x99, 0xae, 0xad, 0xb6, 0x88, 0x90, 0x18,
- 0x50, 0x1d, 0x28, 0x9e, 0x49, 0x00, 0xf7, 0xe4,
- 0x33, 0x1b, 0x99, 0xde, 0xc4, 0xb5, 0x43, 0x3a,
- 0xc7, 0xd3, 0x29, 0xee, 0xb6, 0xdd, 0x26, 0x54,
- 0x5e, 0x96, 0xe5, 0x5b, 0x87, 0x4b, 0xe9, 0x09 };
-
-/* ---------------- test-case low-level code ---------------- */
-
-void dump(char *label, const uint8_t *buf, int len)
-{
- if (debug) {
- int i;
- printf("%s [", label);
- for (i = 0; i < len; ++i)
- printf(" %02x", buf[i]);
- printf(" ]\n");
- }
-}
-
-int tc_write(off_t offset, const uint8_t *buf, int len)
-{
- dump("write ", buf, len);
-
- for (; len > 0; offset += 4, buf += 4, len -= 4) {
- uint32_t val;
- val = htonl(*(uint32_t *)buf);
- eim_write_32(offset, &val);
- }
-
- return 0;
-}
-
-int tc_read(off_t offset, uint8_t *buf, int len)
-{
- uint8_t *rbuf = buf;
- int rlen = len;
-
- for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) {
- uint32_t val;
- eim_read_32(offset, &val);
- *(uint32_t *)rbuf = ntohl(val);
- }
-
- dump("read ", buf, len);
-
- return 0;
-}
-
-int tc_expected(off_t offset, const uint8_t *expected, int len)
-{
- uint8_t *buf;
- int i;
-
- buf = malloc(len);
- if (buf == NULL) {
- perror("malloc");
- return 1;
- }
- dump("expect", expected, len);
-
- if (tc_read(offset, buf, len) != 0)
- goto errout;
-
- for (i = 0; i < len; ++i)
- if (buf[i] != expected[i]) {
- fprintf(stderr, "response byte %d: expected 0x%02x, got 0x%02x\n",
- i, expected[i], buf[i]);
- goto errout;
- }
-
- free(buf);
- return 0;
-errout:
- free(buf);
- return 1;
-}
-
-int tc_init(off_t offset)
-{
- uint8_t buf[4] = { 0, 0, 0, CTRL_INIT_CMD };
-
- return tc_write(offset, buf, 4);
-}
-
-int tc_next(off_t offset)
-{
- uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT_CMD };
-
- return tc_write(offset, buf, 4);
-}
-
-int tc_wait(off_t offset, uint8_t status)
-{
- uint8_t buf[4];
-
-#if 0
- do {
- if (tc_read(offset, buf, 4) != 0)
- return 1;
- } while (!(buf[3] & status));
-
- return 0;
-#else
- int i;
- for (i = 0; i < 10; ++i) {
- if (tc_read(offset, buf, 4) != 0)
- return 1;
- if (buf[3] & status)
- return 0;
- }
- fprintf(stderr, "tc_wait timed out\n");
- return 1;
-#endif
-}
-
-int tc_wait_ready(off_t offset)
-{
- return tc_wait(offset, STATUS_READY_BIT);
-}
-
-int tc_wait_valid(off_t offset)
-{
- return tc_wait(offset, STATUS_VALID_BIT);
-}
-
-/* ---------------- SHA-1 test cases ---------------- */
-
-/* TC1: Read name and version from SHA-1 core. */
-int TC1(void)
-{
- uint8_t name0[4] = { 0x73, 0x68, 0x61, 0x31 }; /* "sha1" */
- uint8_t name1[4] = { 0x20, 0x20, 0x20, 0x20 }; /* " " */
- uint8_t version[4] = { 0x30, 0x2e, 0x35, 0x30 }; /* "0.50" */
-
- if (!quiet)
- printf("TC1: Reading name, type and version words from SHA-1 core.\n");
-
- return
- tc_expected(SHA1_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA1_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA1_ADDR_VERSION, version, 4);
-}
-
-/* TC2: SHA-1 Single block message test as specified by NIST. */
-int TC2(void)
-{
- const uint8_t *block = NIST_512_SINGLE;
- const uint8_t *expected = SHA1_SINGLE_DIGEST;
- int ret;
-
- if (!quiet)
- printf("TC2: Single block message test for SHA-1.\n");
-
- /* Write block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block, SHA1_BLOCK_LEN);
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the digest. */
- ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN);
- return ret;
-}
-
-/* TC3: SHA-1 Double block message test as specified by NIST. */
-int TC3(void)
-{
- const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 };
- static const uint8_t block0_expected[] =
- { 0xF4, 0x28, 0x68, 0x18, 0xC3, 0x7B, 0x27, 0xAE,
- 0x04, 0x08, 0xF5, 0x81, 0x84, 0x67, 0x71, 0x48,
- 0x4A, 0x56, 0x65, 0x72 };
- const uint8_t *expected = SHA1_DOUBLE_DIGEST;
- int ret;
-
- if (!quiet)
- printf("TC3: Double block message test for SHA-1.\n");
-
- /* Write first block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block[0], SHA1_BLOCK_LEN);
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the first digest. */
- tc_expected(SHA1_ADDR_DIGEST, block0_expected, SHA1_DIGEST_LEN);
- /* Write second block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block[1], SHA1_BLOCK_LEN);
- /* Start next block hashing, wait and check status. */
- tc_next(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the second digest. */
- ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN);
- return ret;
-}
-
-/* ---------------- SHA-256 test cases ---------------- */
-
-/* TC4: Read name and version from SHA-256 core. */
-int TC4(void)
-{
- uint8_t name0[4] = { 0x73, 0x68, 0x61, 0x32 }; /* "sha2" */
- uint8_t name1[4] = { 0x2d, 0x32, 0x35, 0x36 }; /* "-256" */
- uint8_t version[4] = { 0x30, 0x2e, 0x38, 0x30 }; /* "0.80" */
-
- if (!quiet)
- printf("TC4: Reading name, type and version words from SHA-256 core.\n");
-
- return
- tc_expected(SHA256_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA256_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA256_ADDR_VERSION, version, 4);
-}
-
-/* TC5: SHA-256 Single block message test as specified by NIST. */
-int TC5()
-{
- const uint8_t *block = NIST_512_SINGLE;
- const uint8_t *expected = SHA256_SINGLE_DIGEST;
-
- if (!quiet)
- printf("TC5: Single block message test for SHA-256.\n");
-
- return
- /* Write block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* TC6: SHA-256 Double block message test as specified by NIST. */
-int TC6()
-{
- const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 };
- static const uint8_t block0_expected[] =
- { 0x85, 0xE6, 0x55, 0xD6, 0x41, 0x7A, 0x17, 0x95,
- 0x33, 0x63, 0x37, 0x6A, 0x62, 0x4C, 0xDE, 0x5C,
- 0x76, 0xE0, 0x95, 0x89, 0xCA, 0xC5, 0xF8, 0x11,
- 0xCC, 0x4B, 0x32, 0xC1, 0xF2, 0x0E, 0x53, 0x3A };
- const uint8_t *expected = SHA256_DOUBLE_DIGEST;
-
- if (!quiet)
- printf("TC6: Double block message test for SHA-256.\n");
-
- return
- /* Write first block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block[0], SHA256_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the first digest. */
- tc_expected(SHA256_ADDR_DIGEST, block0_expected, SHA256_DIGEST_LEN) ||
- /* Write second block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block[1], SHA256_BLOCK_LEN) ||
- /* Start next block hashing, wait and check status. */
- tc_next(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the second digest. */
- tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* TC7: SHA-256 Huge message test. */
-int TC7()
-{
- static const uint8_t block[] =
- { 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f };
-
- /* final digest after 1000 iterations */
- static const uint8_t expected[] =
- { 0x76, 0x38, 0xf3, 0xbc, 0x50, 0x0d, 0xd1, 0xa6,
- 0x58, 0x6d, 0xd4, 0xd0, 0x1a, 0x15, 0x51, 0xaf,
- 0xd8, 0x21, 0xd2, 0x35, 0x2f, 0x91, 0x9e, 0x28,
- 0xd5, 0x84, 0x2f, 0xab, 0x03, 0xa4, 0x0f, 0x2a };
-
- int i, n = 1000;
-
- if (!quiet)
- printf("TC7: Message with %d blocks test for SHA-256.\n", n);
-
- /* Write block data to SHA-256. */
- if (tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN))
- return 1;
-
- /* Start initial block hashing, wait and check status. */
- if (tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_ready(SHA256_ADDR_STATUS))
- return 1;
-
- /* First block done. Do the rest. */
- for (i = 1; i < n; ++i) {
- /* Start next block hashing, wait and check status. */
- if (tc_next(SHA256_ADDR_CTRL) ||
- tc_wait_ready(SHA256_ADDR_STATUS))
- return 1;
- }
-
- /* XXX valid is probably set at the same time as ready */
- if (tc_wait_valid(SHA256_ADDR_STATUS))
- return 1;
- /* Extract the final digest. */
- return tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* ---------------- SHA-512 test cases ---------------- */
-
-/* TC8: Read name and version from SHA-512 core. */
-int TC8()
-{
- uint8_t name0[4] = { 0x73, 0x68, 0x61, 0x32 }; /* "sha2" */
- uint8_t name1[4] = { 0x2d, 0x35, 0x31, 0x32 }; /* "-512" */
- uint8_t version[4] = { 0x30, 0x2e, 0x38, 0x30 }; /* "0.80" */
-
- if (!quiet)
- printf("TC8: Reading name, type and version words from SHA-512 core.\n");
-
- return
- tc_expected(SHA512_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA512_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA512_ADDR_VERSION, version, 4);
-}
-
-/* TC9: SHA-512 Single block message test as specified by NIST.
- We do this for all modes. */
-int tc9(int mode, const uint8_t *expected, int digest_len)
-{
- const uint8_t *block = NIST_1024_SINGLE;
- uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode };
-
- return
- /* Write block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block, SHA512_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, init, 4) ||
- tc_wait_valid(SHA512_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA512_ADDR_DIGEST, expected, digest_len);
-}
-
-int TC9()
-{
- if (!quiet)
- printf("TC9-1: Single block message test for SHA-512/224.\n");
- if (tc9(MODE_SHA_512_224, SHA512_224_SINGLE_DIGEST, SHA512_224_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-2: Single block message test for SHA-512/256.\n");
- if (tc9(MODE_SHA_512_256, SHA512_256_SINGLE_DIGEST, SHA512_256_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-3: Single block message test for SHA-384.\n");
- if (tc9(MODE_SHA_384, SHA384_SINGLE_DIGEST, SHA384_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-4: Single block message test for SHA-512.\n");
- if (tc9(MODE_SHA_512, SHA512_SINGLE_DIGEST, SHA512_DIGEST_LEN) != 0)
- return 1;
-
- return 0;
-}
-
-/* TC10: SHA-512 Double block message test as specified by NIST.
- We do this for all modes. */
-int tc10(int mode, const uint8_t *expected, int digest_len)
-{
- const uint8_t *block[2] = { NIST_1024_DOUBLE0, NIST_1024_DOUBLE1 };
- uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode };
- uint8_t next[4] = { 0, 0, 0, CTRL_NEXT_CMD + mode };
-
- return
- /* Write first block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block[0], SHA512_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, init, 4) ||
- tc_wait_ready(SHA512_ADDR_STATUS) ||
- /* Write second block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block[1], SHA512_BLOCK_LEN) ||
- /* Start next block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, next, 4) ||
- tc_wait_valid(SHA512_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA512_ADDR_DIGEST, expected, digest_len);
-}
-
-int TC10()
-{
- if (!quiet)
- printf("TC10-1: Double block message test for SHA-512/224.\n");
- if (tc10(MODE_SHA_512_224, SHA512_224_DOUBLE_DIGEST, SHA512_224_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-2: Double block message test for SHA-512/256.\n");
- if (tc10(MODE_SHA_512_256, SHA512_256_DOUBLE_DIGEST, SHA512_256_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-3: Double block message test for SHA-384.\n");
- if (tc10(MODE_SHA_384, SHA384_DOUBLE_DIGEST, SHA384_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-4: Double block message test for SHA-512.\n");
- if (tc10(MODE_SHA_512, SHA512_DOUBLE_DIGEST, SHA512_DIGEST_LEN) != 0)
- return 1;
-
- return 0;
-}
-
-int TC11()
-{
- uint8_t board_type[4] = { 'P', 'V', 'T', '1'}; /* "PVT1" */
- uint8_t bitstream_ver[4] = { 0x00, 0x01, 0x00, 0x0B }; /* v0.1.0b */
- uint8_t t[4];
-
- uint8_t seg_rngs_reg_first[4] = { 0xAA, 0xAA, 0xAA, 0xAA};
- uint8_t seg_rngs_reg_second[4] = { 0xBB, 0xBB, 0xBB, 0xBB};
- uint8_t seg_rngs_reg_third[4] = { 0xCC, 0xCC, 0xCC, 0xCC};
-
- uint8_t seg_ciphers_reg_first[4] = { 0xDD, 0xDD, 0xDD, 0xDD};
- uint8_t seg_ciphers_reg_second[4] = { 0xEE, 0xEE, 0xEE, 0xEE};
- uint8_t seg_ciphers_reg_third[4] = { 0xFF, 0xFF, 0xFF, 0xFF};
-
- // write current time into dummy register, then try to read it back
- // to make sure that we can actually write something into eim
- (void)time((time_t *)t);
- tc_write(ADDR_GLOBAL_DUMMY_REG, (void *)&t, 4);
-
- if (!quiet)
- printf("TC11: Reading board type, bitstream version and dummy register from global registers.\n");
- if (!quiet)
- printf("TC11: Reading dummy registers from RNG and CIPHER memory segments.\n");
-
- return
- tc_expected(ADDR_GLOBAL_BOARD_TYPE, board_type, 4) ||
- tc_expected(ADDR_GLOBAL_BITSTREAM_VER, bitstream_ver, 4) ||
- tc_expected(ADDR_GLOBAL_DUMMY_REG, (void *)t, 4) ||
-
- tc_expected(SEGMENT_OFFSET_RNGS + (0 << 2), seg_rngs_reg_first, 4) ||
- tc_expected(SEGMENT_OFFSET_RNGS + (1 << 2), seg_rngs_reg_second, 4) ||
- tc_expected(SEGMENT_OFFSET_RNGS + (2 << 2), seg_rngs_reg_third, 4) ||
-
- tc_expected(SEGMENT_OFFSET_CIPHERS + (0 << 2), seg_ciphers_reg_first, 4) ||
- tc_expected(SEGMENT_OFFSET_CIPHERS + (1 << 2), seg_ciphers_reg_second, 4) ||
- tc_expected(SEGMENT_OFFSET_CIPHERS + (2 << 2), seg_ciphers_reg_third, 4);
-}
-
-/* ---------------- main ---------------- */
-
-unsigned long iter = 0;
-struct timeval tv_start, tv_end;
-void sighandler(int unused)
-{
- double tv_diff;
-
- gettimeofday(&tv_end, NULL);
- tv_diff = (double)(tv_end.tv_sec - tv_start.tv_sec) +
- (double)(tv_end.tv_usec - tv_start.tv_usec)/1000000;
- printf("\n%lu iterations in %.3f seconds (%.3f iterations/sec)\n",
- iter, tv_diff, (double)iter/tv_diff);
- exit(0);
-}
-
-int main(int argc, char *argv[])
-{
- typedef int (*tcfp)(void);
- tcfp sha1_tests[] = { TC1, TC2, TC3 };
- tcfp sha256_tests[] = { TC4, TC5, TC6, TC7 };
- tcfp sha512_tests[] = { TC8, TC9, TC10 };
- tcfp all_tests[] = { TC1, TC2, TC3, TC4, TC5, TC6, TC7, TC8, TC9, TC10, TC11 };
-
- char *usage = "Usage: %s [-h] [-d] [-q] [-r] tc...\n";
- int i, j, opt;
-
- while ((opt = getopt(argc, argv, "h?dqr")) != -1) {
- switch (opt) {
- case 'h':
- case '?':
- printf(usage, argv[0]);
- return 0;
- case 'd':
- debug = 1;
- break;
- case 'q':
- quiet = 1;
- break;
- case 'r':
- repeat = 1;
- break;
- default:
- fprintf(stderr, usage, argv[0]);
- return 1;
- }
- }
-
- // try to setup eim (return value should be 1)
- printf("Configuring EIM .. ");
- if (eim_setup() < 1) {
- printf("ERROR\n");
- return EXIT_FAILURE;
- }
- else {
- printf("EIM Setup ok.\n");
- }
-
- if (repeat) {
- tcfp tc;
- if (optind != argc - 1) {
- fprintf(stderr, "only one test case can be repeated\n");
- return 1;
- }
- j = atoi(argv[optind]);
- if (j <= 0 || j > sizeof(all_tests)/sizeof(all_tests[0])) {
- fprintf(stderr, "invalid test number %s\n", argv[optind]);
- return 1;
- }
- tc = (all_tests[j - 1]);
- srand(time(NULL));
- signal(SIGINT, sighandler);
- gettimeofday(&tv_start, NULL);
- while (1) {
- ++iter;
- if ((iter & 0xffff) == 0) {
- printf(".");
- fflush(stdout);
- }
- if (tc() != 0)
- sighandler(0);
- }
- return 0; /*NOTREACHED*/
- }
-
- /* no args == run all tests */
- if (optind >= argc) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return 1;
- return 0;
- }
-
- for (i = optind; i < argc; ++i) {
- if (strcmp(argv[i], "sha1") == 0) {
- for (j = 0; j < sizeof(sha1_tests)/sizeof(sha1_tests[0]); ++j)
- if (sha1_tests[j]() != 0)
- return 1;
- }
- else if (strcmp(argv[i], "sha256") == 0) {
- for (j = 0; j < sizeof(sha256_tests)/sizeof(sha256_tests[0]); ++j)
- if (sha256_tests[j]() != 0)
- return 1;
- }
- else if (strcmp(argv[i], "sha512") == 0) {
- for (j = 0; j < sizeof(sha512_tests)/sizeof(sha512_tests[0]); ++j)
- if (sha512_tests[j]() != 0)
- return 1;
- }
- else if (strcmp(argv[i], "all") == 0) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return 1;
- }
- else if (isdigit(argv[i][0]) &&
- (((j = atoi(argv[i])) > 0) &&
- (j <= sizeof(all_tests)/sizeof(all_tests[0])))) {
- if (all_tests[j - 1]() != 0)
- return 1;
- }
- else {
- fprintf(stderr, "unknown test case %s\n", argv[i]);
- return 1;
- }
- }
-
- return 0;
-}
diff --git a/sw/test-sha256/novena-eim.c b/sw/test-sha256/novena-eim.c
deleted file mode 100644
index 1effff1..0000000
--- a/sw/test-sha256/novena-eim.c
+++ /dev/null
@@ -1,407 +0,0 @@
-//------------------------------------------------------------------------------
-// novena-eim.c
-//------------------------------------------------------------------------------
-
-
-//------------------------------------------------------------------------------
-// Headers
-//------------------------------------------------------------------------------
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <sys/mman.h>
-#include "novena-eim.h"
-
-
-//------------------------------------------------------------------------------
-// Variables
-//------------------------------------------------------------------------------
-static long mem_page_size = 0;
-static int mem_dev_fd = -1;
-static void * mem_map_ptr = MAP_FAILED;
-static off_t mem_base_addr = 0;
-
-
-//------------------------------------------------------------------------------
-int eim_setup()
-//------------------------------------------------------------------------------
-{
- // register cleanup function
- int ok = atexit(_eim_cleanup);
- if (ok != 0)
- { printf("ERROR: atexit() failed.\n");
- return -1;
- }
-
- // determine memory page size to use in mmap()
- mem_page_size = sysconf(_SC_PAGESIZE);
- if (mem_page_size < 1)
- { printf("ERROR: sysconf(_SC_PAGESIZE) == %ld\n", mem_page_size);
- return -1;
- }
-
- // try to open memory device
- mem_dev_fd = open(MEMORY_DEVICE, O_RDWR | O_SYNC);
- if (mem_dev_fd == -1)
- { printf("ERROR: open(%s) failed.\n", MEMORY_DEVICE);
- return -1;
- }
-
- /* Several blocks in the CPU have common pins, we can use I/O MUX Controller
- * to configure what block will actually use I/O pins. We wait EIM module to be able
- * to communicate with the on-board FPGA. Let's configure IOMUXC accordingly.
- */
- _eim_setup_iomuxc();
-
- /* We need to enable clocking of EIM block in order to be able to use it.
- * Let's configure Clock Controller Module accordingly.
- */
- _eim_setup_ccm();
-
- /* We need to properly configure EIM mode and all the corresponding parameters.
- * That's a lot of code, let's do it now.
- */
- _eim_setup_eim();
-
-
- // done
- return 1;
-}
-
-
-//------------------------------------------------------------------------------
-void _eim_cleanup()
-//------------------------------------------------------------------------------
-{
- // unmap memory if needed
- if (mem_map_ptr != MAP_FAILED)
- { int ok = munmap(mem_map_ptr, mem_page_size);
- if (ok != 0) printf("WARNING: munmap() failed.\n");
- }
-
- // close memory device if needed
- if (mem_dev_fd != -1)
- { int ok = close(mem_dev_fd);
- if (ok != 0) printf("WARNING: close() failed.\n");
- }
-}
-
-
-//------------------------------------------------------------------------------
-void _eim_setup_iomuxc()
-//------------------------------------------------------------------------------
-{
- // create structures
- struct IOMUXC_SW_MUX_CTL_PAD_EIM reg_mux; // mux control register
- struct IOMUXC_SW_PAD_CTL_PAD_EIM reg_pad; // pad control register
-
- // setup mux control register
- reg_mux.mux_mode = IOMUXC_MUX_MODE_ALT0; // ALT0 mode must be used for EIM
- reg_mux.sion = 0; // forced input not needed
- reg_mux.reserved_3 = 0; // must be 0
- reg_mux.reserved_31_5 = 0; // must be 0
-
- // setup pad control register
- reg_pad.sre = IOMUXC_PAD_CTL_SRE_FAST; // fast slew rate
- reg_pad.dse = IOMUXC_PAD_CTL_DSE_33_OHM; // highest drive strength
- reg_pad.speed = IOMUXC_PAD_CTL_SPEED_MEDIUM_10; // medium speed
- reg_pad.ode = IOMUXC_PAD_CTL_ODE_DISABLED; // open drain not needed
- reg_pad.pke = IOMUXC_PAD_CTL_PKE_DISABLED; // neither pull nor keeper are needed
- reg_pad.pue = IOMUXC_PAD_CTL_PUE_PULL; // doesn't matter actually, because PKE is disabled
- reg_pad.pus = IOMUXC_PAD_CTL_PUS_100K_OHM_PU; // doesn't matter actually, because PKE is disabled
- reg_pad.hys = IOMUXC_PAD_CTL_HYS_DISABLED; // use CMOS, not Schmitt trigger input
- reg_pad.reserved_2_1 = 0; // must be 0
- reg_pad.reserved_10_8 = 0; // must be 0
- reg_pad.reserved_31_17 = 0; // must be 0
-
- // all the pins must be configured to use the same ALT0 mode
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_CS0_B, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_OE_B, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_RW, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_LBA_B, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD00, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD01, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD02, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD03, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD04, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD05, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD06, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD07, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD08, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD09, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD10, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD11, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD12, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD13, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD14, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD15, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_WAIT_B, (uint32_t *)&reg_mux);
- eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_BCLK, (uint32_t *)&reg_mux);
-
- // we need to configure all the I/O pads too
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_CS0_B, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_OE_B, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_RW, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_LBA_B, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD00, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD01, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD02, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD03, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD04, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD05, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD06, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD07, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD08, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD09, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD10, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD11, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD12, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD13, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD14, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD15, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_WAIT_B, (uint32_t *)&reg_pad);
- eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK, (uint32_t *)&reg_pad);
-}
-
-
-//------------------------------------------------------------------------------
-void _eim_setup_ccm()
-//------------------------------------------------------------------------------
-{
- // create structure
- struct CCM_CCGR6 ccm_ccgr6;
-
- // read register
- eim_read_32(CCM_CCGR6, (uint32_t *)&ccm_ccgr6);
-
- // modify register
- ccm_ccgr6.cg0_usboh3 = CCM_CGR_ON_EXCEPT_STOP;
- ccm_ccgr6.cg1_usdhc1 = CCM_CGR_OFF;
- ccm_ccgr6.cg2_usdhc2 = CCM_CGR_ON_EXCEPT_STOP;
- ccm_ccgr6.cg3_usdhc3 = CCM_CGR_ON_EXCEPT_STOP;
-
- ccm_ccgr6.cg3_usdhc4 = CCM_CGR_OFF;
- ccm_ccgr6.cg5_eim_slow = CCM_CGR_ON_EXCEPT_STOP;
- ccm_ccgr6.cg6_vdoaxiclk = CCM_CGR_OFF;
- ccm_ccgr6.cg7_vpu = CCM_CGR_OFF;
-
- ccm_ccgr6.cg8_reserved = 0;
- ccm_ccgr6.cg9_reserved = 0;
- ccm_ccgr6.cg10_reserved = 0;
- ccm_ccgr6.cg11_reserved = 0;
- ccm_ccgr6.cg12_reserved = 0;
- ccm_ccgr6.cg13_reserved = 0;
- ccm_ccgr6.cg14_reserved = 0;
- ccm_ccgr6.cg15_reserved = 0;
-
- // write register
- eim_write_32(CCM_CCGR6, (uint32_t *)&ccm_ccgr6);
-}
-
-
-//------------------------------------------------------------------------------
-void _eim_setup_eim()
-//------------------------------------------------------------------------------
-{
- // create structures
- struct EIM_CS_GCR1 gcr1;
- struct EIM_CS_GCR2 gcr2;
- struct EIM_CS_RCR1 rcr1;
- struct EIM_CS_RCR2 rcr2;
- struct EIM_CS_WCR1 wcr1;
- struct EIM_CS_WCR2 wcr2;
-
- struct EIM_WCR wcr;
- struct EIM_WIAR wiar;
- struct EIM_EAR ear;
-
- // read all the registers
- eim_read_32(EIM_CS0GCR1, (uint32_t *)&gcr1);
- eim_read_32(EIM_CS0GCR2, (uint32_t *)&gcr2);
- eim_read_32(EIM_CS0RCR1, (uint32_t *)&rcr1);
- eim_read_32(EIM_CS0RCR2, (uint32_t *)&rcr2);
- eim_read_32(EIM_CS0WCR1, (uint32_t *)&wcr1);
- eim_read_32(EIM_CS0WCR2, (uint32_t *)&wcr2);
-
- eim_read_32(EIM_WCR, (uint32_t *)&wcr);
- eim_read_32(EIM_WIAR, (uint32_t *)&wiar);
- eim_read_32(EIM_EAR, (uint32_t *)&ear);
-
- // manipulate registers as needed
- gcr1.csen = 1; // chip select is enabled |
- gcr1.swr = 1; // write is sync |
- gcr1.srd = 1; // read is sync |
- gcr1.mum = 1; // address and data are multiplexed |
- gcr1.wfl = 0; // write latency is not fixed |
- gcr1.rfl = 0; // read latency is not fixed |
- gcr1.cre = 0; // CRE signal not needed |
- //gcr1.crep = x; // don't care, CRE not used |
- gcr1.bl = 4; // burst length | ?
- gcr1.wc = 0; // write is not continuous | ?
- gcr1.bcd = 3; // BCLK divisor is 3+1=4 |
- gcr1.bcs = 1; // delay from ~CS to BCLK is 1 cycle |
- gcr1.dsz = 1; // 16 bits per databeat at DATA[15:0] |
- gcr1.sp = 0; // supervisor protection is disabled |
- gcr1.csrec = 1; // ~CS recovery is 1 cycle |
- gcr1.aus = 1; // address is not shifted |
- gcr1.gbc = 1; // ~CS gap is 1 cycle |
- gcr1.wp = 0; // write protection is not enabled |
- //gcr1.psz = x; // don't care, page mode is not used |
-
- gcr2.adh = 0; // address hold duration is 1 cycle |
- //gcr2.daps = x; // don't care, DTACK is not used |
- gcr2.dae = 0; // DTACK is not used |
- //gcr2.dap = x; // don't care, DTACK is not used |
- gcr2.mux16_byp_grant = 1; // enable grant mechanism | ?
- gcr2.reserved_3_2 = 0; // must be 0 |
- gcr2.reserved_11_10 = 0; // must be 0 |
- gcr2.reserved_31_13 = 0; // must be 0 |
-
- //rcr1.rcsn = x; // don't care in sync mode |
- rcr1.rcsa = 0; // no delay for ~CS needed |
- //rcr1.oen = x; // don't care in sync mode |
- rcr1.oea = 0; // no delay for ~OE needed |
- rcr1.radvn = 0; // no delay for ~LBA needed |
- rcr1.ral = 0; // clear ~LBA when needed |
- rcr1.radva = 0; // no delay for ~LBA needed |
- rcr1.rwsc = 1; // one wait state |
- rcr1.reserved_3 = 0; // must be 0 |
- rcr1.reserved_7 = 0; // must be 0 |
- rcr1.reserved_11 = 0; // must be 0 |
- rcr1.reserved_15 = 0; // must be 0 |
- rcr1.reserved_23 = 0; // must be 0 |
- rcr1.reserved_31_30 = 0; // must be 0 |
-
- //rcr2.rben = x; // don't care in sync mode |
- rcr2.rbe = 0; // BE is disabled |
- //rcr2.rbea = x; // don't care when BE is not used |
- rcr2.rl = 0; // read latency is 0 | ?
- //rcr2.pat = x; // don't care when page read is not used |
- rcr2.apr = 0; // page read mode is not used |
- rcr2.reserved_7 = 0; // must be 0 |
- rcr2.reserved_11_10 = 0; // must be 0 |
- rcr2.reserved_31_16 = 0; // must be 0 |
-
- //wcr1.wcsn = x; // don't care in sync mode |
- wcr1.wcsa = 0; // no delay for ~CS needed |
- //wcr1.wen = x; // don't care in sync mode |
- wcr1.wea = 0; // no delay for ~WR_N needed |
- //wcr1.wben = x; // don't care in sync mode |
- //wcr1.wbea = x; // don't care in sync mode |
- wcr1.wadvn = 0; // no delay for ~LBA needed |
- wcr1.wadva = 0; // no delay for ~LBA needed |
- wcr1.wwsc = 1; // no wait state in needed |
- wcr1.wbed = 1; // BE is disabled |
- wcr1.wal = 0; // clear ~LBA when needed |
-
- wcr2.wbcdd = 0; // write clock division is not needed |
- wcr2.reserved_31_1 = 0; // must be 0 |
-
- wcr.bcm = 0; // clock is only active during access |
- //wcr.gbcd = x; // don't care when BCM=0 |
- wcr.inten = 0; // interrupt is not used |
- //wcr.intpol = x; // don't care when interrupt is not used |
- wcr.wdog_en = 1; // watchdog is enabled |
- wcr.wdog_limit = 00; // timeout is 128 BCLK cycles |
- wcr.reserved_3 = 0; // must be 0 |
- wcr.reserved_7_6 = 0; // must be 0 |
- wcr.reserved_31_11 = 0; // must be 0 |
-
- wiar.ips_req = 0; // IPS not needed |
- wiar.ips_ack = 0; // IPS not needed |
- //wiar.irq = x; // don't touch |
- //wiar.errst = x; // don't touch |
- wiar.aclk_en = 1; // clock is enabled |
- wiar.reserved_31_5 = 0; // must be 0 |
-
- //ear.error_addr = x; // read-only |
-
- // write modified registers
- eim_write_32(EIM_CS0GCR1, (uint32_t *)&gcr1);
- eim_write_32(EIM_CS0GCR2, (uint32_t *)&gcr2);
- eim_write_32(EIM_CS0RCR1, (uint32_t *)&rcr1);
- eim_write_32(EIM_CS0RCR2, (uint32_t *)&rcr2);
- eim_write_32(EIM_CS0WCR1, (uint32_t *)&wcr1);
- eim_write_32(EIM_CS0WCR2, (uint32_t *)&wcr2);
- eim_write_32(EIM_WCR, (uint32_t *)&wcr);
- eim_write_32(EIM_WIAR, (uint32_t *)&wiar);/*
- eim_write_32(EIM_EAR, (uint32_t *)&ear);*/
-}
-
-
-//------------------------------------------------------------------------------
-void eim_write_32(off_t offset, uint32_t *pvalue)
-//------------------------------------------------------------------------------
-{
- // calculate memory offset
- uint32_t *ptr = (uint32_t *)_eim_calc_offset(offset);
-
- // write data to memory
- memcpy(ptr, pvalue, sizeof(uint32_t));
-}
-
-//------------------------------------------------------------------------------
-void eim_read_32(off_t offset, uint32_t *pvalue)
-//------------------------------------------------------------------------------
-{
- // calculate memory offset
- uint32_t *ptr = (uint32_t *)_eim_calc_offset(offset);
-
- // read data from memory
- memcpy(pvalue, ptr, sizeof(uint32_t));
-}
-
-
-//------------------------------------------------------------------------------
-off_t _eim_calc_offset(off_t offset)
-//------------------------------------------------------------------------------
-{
- // make sure that memory is mapped
- if (mem_map_ptr == MAP_FAILED) _eim_remap_mem(offset);
-
- // calculate starting and ending addresses of currently mapped page
- off_t offset_low = mem_base_addr;
- off_t offset_high = mem_base_addr + (mem_page_size - 1);
-
- // check that offset is in currently mapped page, remap new page otherwise
- if ((offset < offset_low) || (offset > offset_high)) _eim_remap_mem(offset);
-
- // calculate pointer
- return (off_t)mem_map_ptr + (offset - mem_base_addr);
-}
-
-
-//------------------------------------------------------------------------------
-void _eim_remap_mem(off_t offset)
-//------------------------------------------------------------------------------
-{
- // unmap old memory page if needed
- if (mem_map_ptr != MAP_FAILED)
- { int ok = munmap(mem_map_ptr, mem_page_size);
- if (ok != 0)
- { printf("ERROR: munmap() failed.\n");
- exit(EXIT_FAILURE);
- }
- }
-
- // calculate starting address of new page
- while (offset % mem_page_size) offset--;
-
- // try to map new memory page
- mem_map_ptr = mmap(NULL, mem_page_size, PROT_READ | PROT_WRITE, MAP_SHARED, mem_dev_fd, offset);
- if (mem_map_ptr == MAP_FAILED)
- { printf("ERROR: mmap() failed.\n");
- exit(EXIT_FAILURE);
- }
-
- // save last mapped page address
- mem_base_addr = offset;
-}
-
-
-//------------------------------------------------------------------------------
-// End-of-File
-//------------------------------------------------------------------------------
diff --git a/sw/test-sha256/novena-eim.h b/sw/test-sha256/novena-eim.h
deleted file mode 100644
index 3d29f77..0000000
--- a/sw/test-sha256/novena-eim.h
+++ /dev/null
@@ -1,297 +0,0 @@
-//------------------------------------------------------------------------------
-// novena-eim.h
-//------------------------------------------------------------------------------
-
-
-//------------------------------------------------------------------------------
-// Defined Values
-//------------------------------------------------------------------------------
-#define MEMORY_DEVICE "/dev/mem"
-
-
-//------------------------------------------------------------------------------
-// IOMUXC Values
-//------------------------------------------------------------------------------
-#define IOMUXC_MUX_MODE_ALT0 0 // 000
-
-#define IOMUXC_PAD_CTL_SRE_FAST 1 // 1
-#define IOMUXC_PAD_CTL_DSE_33_OHM 7 // 111
-#define IOMUXC_PAD_CTL_SPEED_MEDIUM_10 2 // 10
-#define IOMUXC_PAD_CTL_ODE_DISABLED 0 // 0
-#define IOMUXC_PAD_CTL_PKE_DISABLED 0 // 0
-#define IOMUXC_PAD_CTL_PUE_PULL 1 // 1
-#define IOMUXC_PAD_CTL_PUS_100K_OHM_PU 2 // 10
-#define IOMUXC_PAD_CTL_HYS_DISABLED 0 // 0
-
-//------------------------------------------------------------------------------
-// CCM Values
-//------------------------------------------------------------------------------
-#define CCM_CGR_OFF 0 // 00
-#define CCM_CGR_ON_EXCEPT_STOP 3 // 11
-
-
-//------------------------------------------------------------------------------
-// CPU Registers
-//------------------------------------------------------------------------------
-enum IMX6DQ_REGISTER_OFFSET
-{
- IOMUXC_SW_MUX_CTL_PAD_EIM_CS0_B = 0x020E00F8,
- IOMUXC_SW_MUX_CTL_PAD_EIM_OE_B = 0x020E0100,
- IOMUXC_SW_MUX_CTL_PAD_EIM_RW = 0x020E0104,
- IOMUXC_SW_MUX_CTL_PAD_EIM_LBA_B = 0x020E0108,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD00 = 0x020E0114,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD01 = 0x020E0118,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD02 = 0x020E011C,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD03 = 0x020E0120,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD04 = 0x020E0124,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD05 = 0x020E0128,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD06 = 0x020E012C,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD07 = 0x020E0130,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD08 = 0x020E0134,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD09 = 0x020E0138,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD10 = 0x020E013C,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD11 = 0x020E0140,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD12 = 0x020E0144,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD13 = 0x020E0148,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD14 = 0x020E014C,
- IOMUXC_SW_MUX_CTL_PAD_EIM_AD15 = 0x020E0150,
- IOMUXC_SW_MUX_CTL_PAD_EIM_WAIT_B = 0x020E0154,
- IOMUXC_SW_MUX_CTL_PAD_EIM_BCLK = 0x020E0158,
-
- IOMUXC_SW_PAD_CTL_PAD_EIM_CS0_B = 0x020E040C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_OE_B = 0x020E0414,
- IOMUXC_SW_PAD_CTL_PAD_EIM_RW = 0x020E0418,
- IOMUXC_SW_PAD_CTL_PAD_EIM_LBA_B = 0x020E041C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD00 = 0x020E0428,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD01 = 0x020E042C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD02 = 0x020E0430,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD03 = 0x020E0434,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD04 = 0x020E0438,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD05 = 0x020E043C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD06 = 0x020E0440,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD07 = 0x020E0444,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD08 = 0x020E0448,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD09 = 0x020E044C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD10 = 0x020E0450,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD11 = 0x020E0454,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD12 = 0x020E0458,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD13 = 0x020E045C,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD14 = 0x020E0460,
- IOMUXC_SW_PAD_CTL_PAD_EIM_AD15 = 0x020E0464,
- IOMUXC_SW_PAD_CTL_PAD_EIM_WAIT_B = 0x020E0468,
- IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK = 0x020E046C,
-
- CCM_CCGR6 = 0x020C4080,
-
- EIM_CS0GCR1 = 0x021B8000,
- EIM_CS0GCR2 = 0x021B8004,
- EIM_CS0RCR1 = 0x021B8008,
- EIM_CS0RCR2 = 0x021B800C,
- EIM_CS0WCR1 = 0x021B8010,
- EIM_CS0WCR2 = 0x021B8014,
-
- EIM_WCR = 0x021B8090,
- EIM_WIAR = 0x021B8094,
- EIM_EAR = 0x021B8098,
-
- EIM_BASE_ADDR = 0x08000000
-};
-
-
-//------------------------------------------------------------------------------
-struct IOMUXC_SW_MUX_CTL_PAD_EIM
-//------------------------------------------------------------------------------
-{
- uint32_t mux_mode : 3;
- uint32_t reserved_3 : 1;
- uint32_t sion : 1;
- uint32_t reserved_31_5 : 27;
-};
-//------------------------------------------------------------------------------
-struct IOMUXC_SW_PAD_CTL_PAD_EIM
-//------------------------------------------------------------------------------
-{
- uint32_t sre : 1;
- uint32_t reserved_2_1 : 2;
- uint32_t dse : 3;
- uint32_t speed : 2;
- uint32_t reserved_10_8 : 3;
- uint32_t ode : 1;
- uint32_t pke : 1;
- uint32_t pue : 1;
- uint32_t pus : 2;
- uint32_t hys : 1;
- uint32_t reserved_31_17 : 15;
-};
-
-
-//------------------------------------------------------------------------------
-struct CCM_CCGR6
-//------------------------------------------------------------------------------
-{
- uint32_t cg0_usboh3 : 2;
- uint32_t cg1_usdhc1 : 2;
- uint32_t cg2_usdhc2 : 2;
- uint32_t cg3_usdhc3 : 2;
-
- uint32_t cg3_usdhc4 : 2;
- uint32_t cg5_eim_slow : 2;
- uint32_t cg6_vdoaxiclk : 2;
- uint32_t cg7_vpu : 2;
-
- uint32_t cg8_reserved : 2;
- uint32_t cg9_reserved : 2;
- uint32_t cg10_reserved : 2;
- uint32_t cg11_reserved : 2;
-
- uint32_t cg12_reserved : 2;
- uint32_t cg13_reserved : 2;
- uint32_t cg14_reserved : 2;
- uint32_t cg15_reserved : 2;
-};
-
-
-//------------------------------------------------------------------------------
-struct EIM_CS_GCR1
-//------------------------------------------------------------------------------
-{
- uint32_t csen : 1;
- uint32_t swr : 1;
- uint32_t srd : 1;
- uint32_t mum : 1;
- uint32_t wfl : 1;
- uint32_t rfl : 1;
- uint32_t cre : 1;
- uint32_t crep : 1;
- uint32_t bl : 3;
- uint32_t wc : 1;
- uint32_t bcd : 2;
- uint32_t bcs : 2;
- uint32_t dsz : 3;
- uint32_t sp : 1;
- uint32_t csrec : 3;
- uint32_t aus : 1;
- uint32_t gbc : 3;
- uint32_t wp : 1;
- uint32_t psz : 4;
-};
-//------------------------------------------------------------------------------
-struct EIM_CS_GCR2
-//------------------------------------------------------------------------------
-{
- uint32_t adh : 2;
- uint32_t reserved_3_2 : 2;
- uint32_t daps : 4;
- uint32_t dae : 1;
- uint32_t dap : 1;
- uint32_t reserved_11_10 : 2;
- uint32_t mux16_byp_grant : 1;
- uint32_t reserved_31_13 : 19;
-};
-//------------------------------------------------------------------------------
-struct EIM_CS_RCR1
-//------------------------------------------------------------------------------
-{
- uint32_t rcsn : 3;
- uint32_t reserved_3 : 1;
- uint32_t rcsa : 3;
- uint32_t reserved_7 : 1;
- uint32_t oen : 3;
- uint32_t reserved_11 : 1;
- uint32_t oea : 3;
- uint32_t reserved_15 : 1;
- uint32_t radvn : 3;
- uint32_t ral : 1;
- uint32_t radva : 3;
- uint32_t reserved_23 : 1;
- uint32_t rwsc : 6;
- uint32_t reserved_31_30 : 2;
-};
-//------------------------------------------------------------------------------
-struct EIM_CS_RCR2
-//------------------------------------------------------------------------------
-{
- uint32_t rben : 3;
- uint32_t rbe : 1;
- uint32_t rbea : 3;
- uint32_t reserved_7 : 1;
- uint32_t rl : 2;
- uint32_t reserved_11_10 : 2;
- uint32_t pat : 3;
- uint32_t apr : 1;
- uint32_t reserved_31_16 : 16;
-};
-//------------------------------------------------------------------------------
-struct EIM_CS_WCR1
-//------------------------------------------------------------------------------
-{
- uint32_t wcsn : 3;
- uint32_t wcsa : 3;
- uint32_t wen : 3;
- uint32_t wea : 3;
- uint32_t wben : 3;
- uint32_t wbea : 3;
- uint32_t wadvn : 3;
- uint32_t wadva : 3;
- uint32_t wwsc : 6;
- uint32_t wbed : 1;
- uint32_t wal : 1;
-};
-//------------------------------------------------------------------------------
-struct EIM_CS_WCR2
-//------------------------------------------------------------------------------
-{
- uint32_t wbcdd : 1;
- uint32_t reserved_31_1 : 31;
-};
-//------------------------------------------------------------------------------
-struct EIM_WCR
-//------------------------------------------------------------------------------
-{
- uint32_t bcm : 1;
- uint32_t gbcd : 2;
- uint32_t reserved_3 : 1;
- uint32_t inten : 1;
- uint32_t intpol : 1;
- uint32_t reserved_7_6 : 2;
- uint32_t wdog_en : 1;
- uint32_t wdog_limit : 2;
- uint32_t reserved_31_11 : 21;
-};
-//------------------------------------------------------------------------------
-struct EIM_WIAR
-//------------------------------------------------------------------------------
-{
- uint32_t ips_req : 1;
- uint32_t ips_ack : 1;
- uint32_t irq : 1;
- uint32_t errst : 1;
- uint32_t aclk_en : 1;
- uint32_t reserved_31_5 : 27;
-};
-//------------------------------------------------------------------------------
-struct EIM_EAR
-//------------------------------------------------------------------------------
-{
- uint32_t error_addr : 32;
-};
-
-
-//------------------------------------------------------------------------------
-// Prototypes
-//------------------------------------------------------------------------------
-int eim_setup ();
-void eim_write_32 (off_t, uint32_t *);
-void eim_read_32 (off_t, uint32_t *);
-
-void _eim_setup_iomuxc ();
-void _eim_setup_ccm ();
-void _eim_setup_eim ();
-void _eim_cleanup ();
-off_t _eim_calc_offset (off_t);
-void _eim_remap_mem (off_t);
-
-
-//------------------------------------------------------------------------------
-// End-of-File
-//------------------------------------------------------------------------------
diff --git a/sw/test-sha256/test-sha256.c b/sw/test-sha256/test-sha256.c
deleted file mode 100644
index 0ea0d8c..0000000
--- a/sw/test-sha256/test-sha256.c
+++ /dev/null
@@ -1,179 +0,0 @@
-//======================================================================
-//
-// test-sha256.c
-// -------------
-// test program for Cryptech Novena framwwork with EIM interface
-// using the sha256 core.
-//
-//======================================================================
-
-//------------------------------------------------------------------------------
-// Headers
-//------------------------------------------------------------------------------
-#include <stdio.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include "novena-eim.h"
-
-
-//------------------------------------------------------------------------------
-// Defines
-//
-// Symbolic names for the SHA256 core API.
-//------------------------------------------------------------------------------
-#define SHA256_PREFIX (0x0000)
-#define SHA256_BASE (EIM_BASE_ADDR + SHA256_PREFIX)
-
-#define ADDR_NAME0 (SHA256_BASE + (0x00 << 2))
-#define ADDR_NAME1 (SHA256_BASE + (0x01 << 2))
-#define ADDR_VERSION (SHA256_BASE + (0x02 << 2))
-
-#define ADDR_CTRL (SHA256_BASE + (0x08 << 2))
-#define CTRL_INIT_BIT 0
-#define CTRL_NEXT_BIT 1
-
-#define ADDR_STATUS (SHA256_BASE + (0x09 << 2))
-#define STATUS_READY_BIT 0
-#define STATUS_VALID_BIT 1
-
-#define ADDR_BLOCK0 (SHA256_BASE + (0x10 << 2))
-#define ADDR_BLOCK1 (SHA256_BASE + (0x11 << 2))
-#define ADDR_BLOCK2 (SHA256_BASE + (0x12 << 2))
-#define ADDR_BLOCK3 (SHA256_BASE + (0x13 << 2))
-#define ADDR_BLOCK4 (SHA256_BASE + (0x14 << 2))
-#define ADDR_BLOCK5 (SHA256_BASE + (0x15 << 2))
-#define ADDR_BLOCK6 (SHA256_BASE + (0x16 << 2))
-#define ADDR_BLOCK7 (SHA256_BASE + (0x17 << 2))
-#define ADDR_BLOCK8 (SHA256_BASE + (0x18 << 2))
-#define ADDR_BLOCK9 (SHA256_BASE + (0x19 << 2))
-#define ADDR_BLOCK10 (SHA256_BASE + (0x1a << 2))
-#define ADDR_BLOCK11 (SHA256_BASE + (0x1b << 2))
-#define ADDR_BLOCK12 (SHA256_BASE + (0x1c << 2))
-#define ADDR_BLOCK13 (SHA256_BASE + (0x1d << 2))
-#define ADDR_BLOCK14 (SHA256_BASE + (0x1e << 2))
-#define ADDR_BLOCK15 (SHA256_BASE + (0x1f << 2))
-
-#define ADDR_DIGEST0 (SHA256_BASE + (0x20 << 2))
-#define ADDR_DIGEST1 (SHA256_BASE + (0x21 << 2))
-#define ADDR_DIGEST2 (SHA256_BASE + (0x22 << 2))
-#define ADDR_DIGEST3 (SHA256_BASE + (0x23 << 2))
-#define ADDR_DIGEST4 (SHA256_BASE + (0x24 << 2))
-#define ADDR_DIGEST5 (SHA256_BASE + (0x25 << 2))
-#define ADDR_DIGEST6 (SHA256_BASE + (0x26 << 2))
-#define ADDR_DIGEST7 (SHA256_BASE + (0x27 << 2))
-
-
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
-uint32_t get_w32(uint32_t addr)
-{
- unsigned int read_data;
-
- eim_read_32(addr, &read_data);
-
- return read_data;
-}
-
-
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
-void test_single_block()
-{
- uint32_t write_data;
-
- write_data = 0x61626380;
- eim_write_32(ADDR_BLOCK0, &write_data);
- write_data = 0x00000000;
- eim_write_32(ADDR_BLOCK1, &write_data);
- eim_write_32(ADDR_BLOCK2, &write_data);
- eim_write_32(ADDR_BLOCK3, &write_data);
- eim_write_32(ADDR_BLOCK4, &write_data);
- eim_write_32(ADDR_BLOCK5, &write_data);
- eim_write_32(ADDR_BLOCK6, &write_data);
- eim_write_32(ADDR_BLOCK7, &write_data);
- eim_write_32(ADDR_BLOCK8, &write_data);
- eim_write_32(ADDR_BLOCK9, &write_data);
- eim_write_32(ADDR_BLOCK10, &write_data);
- eim_write_32(ADDR_BLOCK11, &write_data);
- eim_write_32(ADDR_BLOCK12, &write_data);
- eim_write_32(ADDR_BLOCK13, &write_data);
- eim_write_32(ADDR_BLOCK14, &write_data);
- write_data = 0x00000018;
- eim_write_32(ADDR_BLOCK15, &write_data);
-
- write_data = 0x00000001;
- eim_write_32(ADDR_CTRL, &write_data);
-
- printf("digest0 = 0x%08x\n", get_w32(ADDR_DIGEST0));
- printf("digest1 = 0x%08x\n", get_w32(ADDR_DIGEST1));
- printf("digest2 = 0x%08x\n", get_w32(ADDR_DIGEST2));
- printf("digest3 = 0x%08x\n", get_w32(ADDR_DIGEST3));
- printf("digest4 = 0x%08x\n", get_w32(ADDR_DIGEST4));
- printf("digest5 = 0x%08x\n", get_w32(ADDR_DIGEST5));
- printf("digest6 = 0x%08x\n", get_w32(ADDR_DIGEST6));
- printf("digest7 = 0x%08x\n", get_w32(ADDR_DIGEST7));
-
- // What we want to see:
- // res0 = 256'hBA7816BF8F01CFEA414140DE5DAE2223B00361A396177A9CB410FF61F20015AD;
-
-}
-
-
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
-void test_dual_block()
-{
- // Dual block test vectors as specified by NIST.
- // tc1_0 = 512'h6162636462636465636465666465666765666768666768696768696A68696A6B696A6B6C6A6B6C6D6B6C6D6E6C6D6E6F6D6E6F706E6F70718000000000000000;
- // res1_0 = 256'h85E655D6417A17953363376A624CDE5C76E09589CAC5F811CC4B32C1F20E533A;
- // tc1_1 = 512'h000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001C0;
- // res1_1 = 256'h248D6A61D20638B8E5C026930C3E6039A33CE45964FF2167F6ECEDD419DB06C1;
-
-
-}
-
-
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
-void test_sha256()
-{
-
- test_single_block();
-
-}
-
-
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
-int config_eim()
-{
- int ok;
-
- // try to setup eim (return value should be 1)
- printf("Configuring EIM .. ");
- ok = eim_setup();
- if (ok < 1) {
- printf("ERROR\n");
- return EXIT_FAILURE;
- }
- else {
- printf("EIM Setup ok.\n");
- }
-
- return EXIT_SUCCESS;
-}
-
-//------------------------------------------------------------------------------
-// main()
-//------------------------------------------------------------------------------
-int main()
-{
- config_eim();
- test_sha256();
-
- return 0;
-}
-
-//======================================================================
-// EOF test-sha256.c
-//======================================================================
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 09:27:58 +0000