aboutsummaryrefslogtreecommitdiff
path: root/rtl
diff options
context:
space:
mode:
authorJoachim StroĢˆmbergson <joachim@secworks.se>2015-03-13 11:47:46 +0100
committerJoachim StroĢˆmbergson <joachim@secworks.se>2015-03-13 11:47:46 +0100
commit97f033586d90b3b6002c54f2cbd5854707fb0d5f (patch)
treeb09861493a1cf7a8fe05c0a4c20fbad683bd3464 /rtl
parent85147347673fc40d321457b34d8065e5be3b4e7b (diff)
(1) First attempt at connecting the rng core into the novena. (2) Fixed minor copy crimes. (3) autmagically removed trailing whitespace.
Diffstat (limited to 'rtl')
-rw-r--r--rtl/src/verilog/eim_memory.v53
-rw-r--r--rtl/src/verilog/novena_baseline_top.v19
-rw-r--r--rtl/src/verilog/rng_selector.v92
3 files changed, 68 insertions, 96 deletions
diff --git a/rtl/src/verilog/eim_memory.v b/rtl/src/verilog/eim_memory.v
index c570ee6..953cff3 100644
--- a/rtl/src/verilog/eim_memory.v
+++ b/rtl/src/verilog/eim_memory.v
@@ -10,7 +10,7 @@
//
// Author: Pavel Shatov
// Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
-//
+//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
@@ -44,24 +44,27 @@ module eim_memory
input wire sys_clk,
input wire sys_rst,
+ input wire noise,
+ output wire [7 : 0] noise_led,
+
input wire [16: 0] sys_eim_addr,
input wire sys_eim_wr,
input wire sys_eim_rd,
output wire [31: 0] sys_read_data,
input wire [31: 0] sys_write_data
);
-
-
+
+
/* Three upper bits of address [16:14] are used to select memory segment.
* There can be eight segments. So far segment 0 is used for hashes,
* segment 1 is reserved for random number generators, segment 2 is reserved
* for chiphers. Other segments are not used so far.
*/
-
+
/* Every segment has its own memory map, take at look at corresponding
* selectors for more information.
*/
-
+
//----------------------------------------------------------------
// Segment Decoder
//----------------------------------------------------------------
@@ -72,22 +75,22 @@ module eim_memory
wire [ 2: 0] addr_segment = sys_eim_addr[16:14]; // 3 upper bits are decoded here
wire [13: 0] addr_segment_int = sys_eim_addr[13: 0]; // 14 lower bits are decoded individually
// in corresponding segment selectors
-
+
wire [31: 0] segment_hashes_read_data; // data read from HASHES segment
wire [31: 0] segment_rngs_read_data; // data read from RNGS segment
wire [31: 0] segment_ciphers_read_data; // data read from CIPHERS segment
-
+
wire segment_enable_hashes = (addr_segment == SEGMENT_ADDR_HASHES) ? 1'b1 : 1'b0; // HASHES segment is being addressed
wire segment_enable_rngs = (addr_segment == SEGMENT_ADDR_RNGS) ? 1'b1 : 1'b0; // RNGS segment is being addressed
wire segment_enable_ciphers = (addr_segment == SEGMENT_ADDR_CIPHERS) ? 1'b1 : 1'b0; // CIPHERS segment is being addressed
-
-
+
+
//----------------------------------------------------------------
// Output (Read Data) Bus
//----------------------------------------------------------------
reg [31: 0] sys_read_data_reg;
assign sys_read_data = sys_read_data_reg;
-
+
always @*
//
case (addr_segment)
@@ -96,9 +99,9 @@ module eim_memory
SEGMENT_ADDR_CIPHERS: sys_read_data_reg = segment_ciphers_read_data;
default: sys_read_data_reg = {32{1'b0}};
endcase
-
-
-
+
+
+
//----------------------------------------------------------------
// HASH Core Selector
//
@@ -117,38 +120,40 @@ module eim_memory
// because we have already decoded 3 upper bits earlier,
// every segment can have its own address decoder.
.sys_eim_wr(sys_eim_wr),
- .sys_eim_rd(sys_eim_rd),
+ .sys_eim_rd(sys_eim_rd),
.sys_write_data(sys_write_data),
.sys_read_data(segment_hashes_read_data) // output from HASHES segment
);
-
-
+
+
//----------------------------------------------------------------
// RNG Selector
//
// This selector is used to map random number generator registers into
// EIM address space and select which RNG to send EIM read and
- // write operations to. So far there are no RNG cores.
+ // write operations to.
//----------------------------------------------------------------
rng_selector segment_rngs
(
.sys_clk(sys_clk),
.sys_rst(sys_rst),
-
.sys_ena(segment_enable_rngs), // only enable active selector
+ .noise(noise),
+ .noise_led(noie_led),
+
.sys_eim_addr(addr_segment_int), // we only connect 14 lower bits of address here,
// because we have already decoded 3 upper bits earlier,
// every segment can have its own address decoder.
.sys_eim_wr(sys_eim_wr),
- .sys_eim_rd(sys_eim_rd),
+ .sys_eim_rd(sys_eim_rd),
.sys_write_data(sys_write_data),
.sys_read_data(segment_rngs_read_data) // output from RNGS segment
);
-
-
+
+
//----------------------------------------------------------------
// CIPHER Selector
//
@@ -167,13 +172,13 @@ module eim_memory
// because we have already decoded 3 upper bits earlier,
// every segment can have its own address decoder.
.sys_eim_wr(sys_eim_wr),
- .sys_eim_rd(sys_eim_rd),
+ .sys_eim_rd(sys_eim_rd),
.sys_write_data(sys_write_data),
.sys_read_data(segment_ciphers_read_data) // output from CIPHERS segment
);
-
-
+
+
endmodule
diff --git a/rtl/src/verilog/novena_baseline_top.v b/rtl/src/verilog/novena_baseline_top.v
index 3499fa3..4bf1fdb 100644
--- a/rtl/src/verilog/novena_baseline_top.v
+++ b/rtl/src/verilog/novena_baseline_top.v
@@ -56,12 +56,12 @@ module novena_baseline_top
input wire eim_bclk, // EIM burst clock. Started by the CPU.
input wire eim_cs0_n, // Chip select (active low).
inout wire [15 : 0] eim_da, // Bidirectional address and data port.
- input wire [18: 16] eim_a, // MSB part of address port.
+ input wire [18: 16] eim_a, // MSB part of address port.
input wire eim_lba_n, // Latch address signal (active low).
input wire eim_wr_n, // write enable signal (active low).
input wire eim_oe_n, // output enable signal (active low).
output wire eim_wait_n, // Data wait signal (active low).
-
+
// Novena utility ports
apoptosis_pin, // Hold low to not restart after config.
led_pin // LED on edge close to the FPGA.
@@ -137,13 +137,16 @@ module novena_baseline_top
.sys_clk(sys_clk),
.sys_rst(sys_rst),
+ .noise(ct_noise),
+ .noise_led(ct_led),
+
.sys_eim_addr(sys_eim_addr),
.sys_eim_wr(sys_eim_wr),
.sys_eim_rd(sys_eim_rd),
.sys_write_data(sys_eim_dout),
.sys_read_data(sys_eim_din)
- );
+ );
//----------------------------------------------------------------
@@ -160,16 +163,6 @@ module novena_baseline_top
.led_out(led_pin)
);
-
- //----------------------------------------------------------------
- // Cryptech Logic
- //
- // Logic specific to the Cryptech use of the Novena.
- // Currently we just hard wire the LED outputs.
- //----------------------------------------------------------------
- assign ct_led = {8{ct_noise}};
-
-
//----------------------------------------------------------------
// Novena Patch
//
diff --git a/rtl/src/verilog/rng_selector.v b/rtl/src/verilog/rng_selector.v
index f86b3e9..8cb11ad 100644
--- a/rtl/src/verilog/rng_selector.v
+++ b/rtl/src/verilog/rng_selector.v
@@ -1,16 +1,13 @@
//======================================================================
//
// rng_selector.v
-// -----------------
-// Top level wrapper that creates the Cryptech coretest system.
-// The wrapper contains instances of external interface, coretest
-// and the core to be tested. And if more than one core is
-// present the wrapper also includes address and data muxes.
+// --------------
+// rng selector wrapper for the RNG.
//
//
// Authors: Joachim Strombergson, Paul Selkirk, Pavel Shatov
// Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
-//
+//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
@@ -45,6 +42,9 @@ module rng_selector
input wire sys_rst,
input wire sys_ena,
+ input wire noise,
+ output wire [7 : 0] noise_led,
+
input wire [13: 0] sys_eim_addr,
input wire sys_eim_wr,
input wire sys_eim_rd,
@@ -52,61 +52,35 @@ module rng_selector
input wire [31 : 0] sys_write_data
);
-
- //
- // Output Register
- //
- reg [31: 0] tmp_read_data;
- assign sys_read_data = tmp_read_data;
-
+ wire core_cs;
+
+ asstgn core_cs = sys_ena & (sys_eim_wr | sys_eim_rd);
+
+ assign noise_led = 8'ab;
+
+ trng trng_inst(
+ .clk(sys_clk),
+ .reset_n(!sys_rst),
+
+ .avalanche_noise(noise),
+
+ .cs(core_cs),
+ .we(sys_eim_wr),
+ .address(sys_eim_addr[11 : 0]),
+ .write_data(sys_write_data),
+ .read_data(sys_read_data),
+ .error(),
+ .
+ .entropy_bit(),
+ .debug(),
+ .debug_update(),
+ .
+ .security_error()
+ );
- /* So far we have no RNG cores, let's make some dummy 32-bit registers here
- * to prevent ISE from complaining that we don't use input ports.
- */
-
- reg [31: 0] reg_dummy_first;
- reg [31: 0] reg_dummy_second;
- reg [31: 0] reg_dummy_third;
-
- always @(posedge sys_clk)
- //
- if (sys_rst) begin
- reg_dummy_first <= {8{4'hA}};
- reg_dummy_second <= {8{4'hB}};
- reg_dummy_third <= {8{4'hC}};
- end else if (sys_ena) begin
- //
- if (sys_eim_wr) begin
- //
- // WRITE handler
- //
- case (sys_eim_addr)
- 14'd0: reg_dummy_first <= sys_write_data;
- 14'd1: reg_dummy_second <= sys_write_data;
- 14'd2: reg_dummy_third <= sys_write_data;
- endcase
- //
- end
- //
- if (sys_eim_rd) begin
- //
- // READ handler
- //
- case (sys_eim_addr)
- 14'd0: tmp_read_data <= reg_dummy_first;
- 14'd1: tmp_read_data <= reg_dummy_second;
- 14'd2: tmp_read_data <= reg_dummy_third;
- //
- default:
- tmp_read_data <= {32{1'b0}}; // read non-existent locations as zeroes
- endcase
- //
- end
- //
- end
-endmodule
+endmodule // rng_selector
//======================================================================
-// EOF core_selector.v
+// EOF rng_selector.v
//======================================================================