Adding ports for the core selector to include Cryptech ports. Moving the Cryptech blinkenlights logic into core select.

2 files changed, 47 insertions, 39 deletions

diff --git a/rtl/src/verilog/core_selector.v b/rtl/src/verilog/core_selector.v
index 8ce2003..092a704 100644
--- a/rtl/src/verilog/core_selector.v
+++ b/rtl/src/verilog/core_selector.v
@@ -3,9 +3,12 @@
 // core_selector.v
 // ---------------
 // Core selector Cryptech Novena FPGA framework.
+// This is basically the top of the Cryptech subsystem for the
+// FPGA. The module is responsible for selecting which core is
+// connected to the extermal high speed interface.
 //
 //
-// Author: Pavel Shatov
+// Author: Pavel Shatov, Paul Sekirk, Joachim Strömbergson
 // Copyright (c) 2014, NORDUnet A/S All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
@@ -41,9 +44,13 @@ module core_selector
 	 input wire           sys_clk,
          input wire           sys_rst,
 
+         input  wire          ct_noise,
+         output wire [07 : 0] ct_led,
+
 	 input wire [13: 0]   sys_eim_addr,
          input wire           sys_eim_wr,
          input wire           sys_eim_rd,
+
          output wire [31 : 0] read_data,
 	 input wire [31 : 0]  write_data
 	);
@@ -136,6 +143,41 @@ module core_selector
 	);
 
 
+  //----------------------------------------------------------------
+  // Cryptech Logic
+  //
+  // Logic specific to the Cryptech use of the Novena.
+  // Currently we just sample the noise and drive the LEDs
+  // with this signal.
+  //----------------------------------------------------------------
+  reg ct_noise_sample0_reg;
+  reg ct_noise_sample1_reg;
+  reg [7 : 0] ct_led_reg;
+
+  always @ (posedge sys_clk)
+    begin
+      if (sys_rst)
+        begin
+          ct_led_reg           <= 8'h00;
+          ct_noise_sample0_reg <= 1'b0;
+          ct_noise_sample1_reg <= 1'b0;
+        end
+      else
+        begin
+          ct_noise_sample0_reg <= ct_noise;
+          ct_noise_sample1_reg <= ct_noise_sample0_reg;
+          ct_led_reg[0] <= ct_noise_sample1_reg;
+          ct_led_reg[1] <= ct_noise_sample1_reg;
+          ct_led_reg[2] <= ct_noise_sample1_reg;
+          ct_led_reg[3] <= ct_noise_sample1_reg;
+          ct_led_reg[4] <= ct_noise_sample1_reg;
+          ct_led_reg[5] <= ct_noise_sample1_reg;
+          ct_led_reg[6] <= ct_noise_sample1_reg;
+          ct_led_reg[7] <= ct_noise_sample1_reg;
+        end
+    end
+
+  assign ct_led = ct_led_reg;
 
 endmodule
 
diff --git a/rtl/src/verilog/novena_baseline_top.v b/rtl/src/verilog/novena_baseline_top.v
index 63be3a7..f31f209 100644
--- a/rtl/src/verilog/novena_baseline_top.v
+++ b/rtl/src/verilog/novena_baseline_top.v
@@ -131,11 +131,14 @@ module novena_baseline_top
   // EIM address space and select which core to send EIM read and
   // write operations to.
   //----------------------------------------------------------------
-  core_selector mux
+  core_selector ct_subsystem
     (
      .sys_clk(sys_clk),
      .sys_rst(sys_rst),
 
+     .ct_noise(ct_noise),
+     .ct_led(ct_led),
+
      .sys_eim_addr(sys_eim_addr),
      .sys_eim_wr(sys_eim_wr),
      .sys_eim_rd(sys_eim_rd),
@@ -161,43 +164,6 @@ module novena_baseline_top
 
 
   //----------------------------------------------------------------
-  // Cryptech Logic
-  //
-  // Logic specific to the Cryptech use of the Novena.
-  // Currently we just sample the noise and drive the LEDs
-  // with this signal.
-  //----------------------------------------------------------------
-  reg ct_noise_sample0_reg;
-  reg ct_noise_sample1_reg;
-  reg [7 : 0] ct_led_reg;
-
-  always @ (posedge sys_clk)
-    begin
-      if (sys_rst)
-        begin
-          ct_led_reg           <= 8'h00;
-          ct_noise_sample0_reg <= 1'b0;
-          ct_noise_sample1_reg <= 1'b0;
-        end
-      else
-        begin
-          ct_noise_sample0_reg <= ct_noise;
-          ct_noise_sample1_reg <= ct_noise_sample0_reg;
-          ct_led_reg[0] <= ct_noise_sample1_reg;
-          ct_led_reg[1] <= ct_noise_sample1_reg;
-          ct_led_reg[2] <= ct_noise_sample1_reg;
-          ct_led_reg[3] <= ct_noise_sample1_reg;
-          ct_led_reg[4] <= ct_noise_sample1_reg;
-          ct_led_reg[5] <= ct_noise_sample1_reg;
-          ct_led_reg[6] <= ct_noise_sample1_reg;
-          ct_led_reg[7] <= ct_noise_sample1_reg;
-        end
-    end
-
-  assign ct_led = ct_led_reg;
-
-
-  //----------------------------------------------------------------
   // Novena Patch
   //
   // Patch logic to keep the Novena board happy.