aboutsummaryrefslogblamecommitdiff
path: root/rtl/src/verilog/eim_arbiter.v
blob: 3dc62608abf245995eff945656276094cb1c083b (plain) (tree)





































                                                                           


                  

                                            













                                                                                            
                                                                    
                                                                                    
                                                                                    































































































































































































































                                                                                                                                                                                                   



                                                                        
//======================================================================
//
// eim_arbiter.v
// -------------
// Port arbiter for the EIM interface for the Cryptech
// Novena FPGA framework.
//
//
// Author: Pavel Shatov
// Copyright (c) 2014, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// - Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module eim_arbiter
	(
		eim_bclk, eim_cs0_n, eim_da,
		eim_lba_n, eim_wr_n,
		eim_oe_n, eim_wait_n,

		sys_clk,
		sys_addr,
		sys_wren, sys_data_out,
		sys_rden, sys_data_in
	);


		//
		// Ports
		//
	input		wire				eim_bclk;		// | eim bus
	input		wire				eim_cs0_n;		// |
	inout		wire	[15: 0]	eim_da;			// |
	input		wire				eim_lba_n;		// |
	input		wire				eim_wr_n;		// |
	input		wire				eim_oe_n;		// |
	output	wire				eim_wait_n;		// |

	input		wire				sys_clk;			// system clock

	output	wire	[13: 0]	sys_addr;		// | user bus
	output	wire				sys_wren;		// |
	output	wire	[31: 0]	sys_data_out;	// |
	output	wire				sys_rden;		// |
	input		wire	[31: 0]	sys_data_in;	// |


		//
		// Data/Address PHY
		//

	/* PHY is needed to control bi-directional address/data bus. */

	wire	[15: 0]	da_ro;	// value read from pins
	reg	[15: 0]	da_di;	// value drives onto pins

	eim_da_phy da_phy
	(
		.buf_io	(eim_da),	// <-- connect directly top-level port
		.buf_di	(da_di),
		.buf_ro	(da_ro),
		.buf_t	(eim_oe_n)	// <-- driven by EIM directly
	);


		//
		// FSM
		//
	localparam	EIM_FSM_STATE_INIT			= 5'b0_0_000;	// arbiter is idle

	localparam	EIM_FSM_STATE_WRITE_START	= 5'b1_1_000;	// got address to write at
	localparam	EIM_FSM_STATE_WRITE_LSB		= 5'b1_1_001;	// got lower 16 bits of data to write
	localparam	EIM_FSM_STATE_WRITE_MSB		= 5'b1_1_010;	// got upper 16 bits of data to write
	localparam	EIM_FSM_STATE_WRITE_WAIT	= 5'b1_1_100;	// request to user-side logic sent
	localparam	EIM_FSM_STATE_WRITE_DONE	= 5'b1_1_111;	// user-side logic acknowledged transaction

	localparam	EIM_FSM_STATE_READ_START	= 5'b1_0_000;	// got address to read from
	localparam	EIM_FSM_STATE_READ_WAIT		= 5'b1_0_100;	// request to user-side logic sent
	localparam	EIM_FSM_STATE_READ_READY	= 5'b1_0_011;	// got acknowledge from user logic
	localparam	EIM_FSM_STATE_READ_LSB		= 5'b1_0_001;	// returned lower 16 bits to master
	localparam	EIM_FSM_STATE_READ_MSB		= 5'b1_0_010;	// returned upper 16 bits to master
	localparam	EIM_FSM_STATE_READ_DONE		= 5'b1_0_111;	// transaction complete

	reg	[ 4: 0]	eim_fsm_state			= EIM_FSM_STATE_INIT;	// fsm state
	reg	[13: 0]	eim_addr_latch			= {14{1'bX}};				// transaction address
	reg	[15: 0]	eim_write_lsb_latch	= {16{1'bX}};				// lower 16 bits of data to write

		/* These flags are used to wake up from INIT state. */
	wire	eim_write_start_flag		= (eim_lba_n == 1'b0) && (eim_wr_n == 1'b0) && (da_ro[1:0] == 2'b00);
	wire	eim_read_start_flag		= (eim_lba_n == 1'b0) && (eim_wr_n == 1'b1) && (da_ro[1:0] == 2'b00);

		/* These are transaction response flag and data from user-side logic. */
	wire				eim_user_ack;
	wire	[31: 0]	eim_user_data;

		/* FSM is reset whenever Chip Select is de-asserted. */

		//
		// FSM Transition Logic
		//
	always @(posedge eim_bclk or posedge eim_cs0_n) begin
		//
		if (eim_cs0_n == 1'b1) eim_fsm_state <= EIM_FSM_STATE_INIT;
		//
		else begin
			//
			case (eim_fsm_state)
				//
				// INIT -> WRITE, INIT -> READ
				//
				EIM_FSM_STATE_INIT: begin
					if (eim_write_start_flag)	eim_fsm_state	<= EIM_FSM_STATE_WRITE_START;
					if (eim_read_start_flag)	eim_fsm_state	<= EIM_FSM_STATE_READ_START;
				end
				//
				// WRITE
				//
				EIM_FSM_STATE_WRITE_START:		eim_fsm_state	<= EIM_FSM_STATE_WRITE_LSB;
				//
				EIM_FSM_STATE_WRITE_LSB:		eim_fsm_state	<= EIM_FSM_STATE_WRITE_MSB;
				//
				EIM_FSM_STATE_WRITE_MSB:		eim_fsm_state	<= EIM_FSM_STATE_WRITE_WAIT;
				//
				EIM_FSM_STATE_WRITE_WAIT:
					if (eim_user_ack)				eim_fsm_state	<= EIM_FSM_STATE_WRITE_DONE;
				//
				EIM_FSM_STATE_WRITE_DONE:		eim_fsm_state	<= EIM_FSM_STATE_INIT;
				//
				// READ
				//
				EIM_FSM_STATE_READ_START:		eim_fsm_state	<= EIM_FSM_STATE_READ_WAIT;
				//
				EIM_FSM_STATE_READ_WAIT:
					if (eim_user_ack)				eim_fsm_state	<= EIM_FSM_STATE_READ_READY;
				//
				EIM_FSM_STATE_READ_READY:		eim_fsm_state <= EIM_FSM_STATE_READ_LSB;
				//
				EIM_FSM_STATE_READ_LSB:			eim_fsm_state	<= EIM_FSM_STATE_READ_MSB;
				//
				EIM_FSM_STATE_READ_MSB:			eim_fsm_state	<= EIM_FSM_STATE_READ_DONE;
				//
				EIM_FSM_STATE_READ_DONE:		eim_fsm_state	<= EIM_FSM_STATE_INIT;
				//
				//
				//
				default: 							eim_fsm_state	<= EIM_FSM_STATE_INIT;
				//
			endcase
			//
		end
		//
	end


		//
		// Address Latch
		//
	always @(posedge eim_bclk)
		//
		if ((eim_fsm_state == EIM_FSM_STATE_INIT) && (eim_write_start_flag || eim_read_start_flag))
			eim_addr_latch <= da_ro[15:2];


		//
		// Additional Write Logic
		//
	always @(posedge eim_bclk)
		//
		if (eim_fsm_state == EIM_FSM_STATE_WRITE_START)
			eim_write_lsb_latch <= da_ro;


		//
		// Additional Read Logic
		//

	/* Note that this stuff operates on falling clock edge, because the cpu
    * samples our bi-directional data bus on rising clock edge.
	 */

	always @(negedge eim_bclk or posedge eim_cs0_n)
		//
		if (eim_cs0_n == 1'b1)										da_di <= {16{1'bX}};					// don't care what to drive
		else begin
			//
			if (eim_fsm_state == EIM_FSM_STATE_READ_LSB)		da_di	<= eim_user_data[15: 0];	// drive lower 16 bits at first...
			if (eim_fsm_state == EIM_FSM_STATE_READ_MSB)		da_di	<= eim_user_data[31:16];	// ...then drive upper 16 bits
			//
		end


		//
		// Wait Logic
		//

		/* Note that this stuff operates on falling clock edge, because the cpu
		*  samples our WAIT_N flag on rising clock edge.
		*/

	reg	eim_wait_reg	= 1'b0;

	always @(negedge eim_bclk or posedge eim_cs0_n)
		//
		if (eim_cs0_n == 1'b1)											eim_wait_reg	<= 1'b0;		// clear wait
		else begin
			//
			if (eim_fsm_state == EIM_FSM_STATE_WRITE_START)		eim_wait_reg	<= 1'b1;		// start waiting for write to complete
			if (eim_fsm_state == EIM_FSM_STATE_READ_START)		eim_wait_reg	<= 1'b1;		// start waiting for read to complete
			//
			if (eim_fsm_state	== EIM_FSM_STATE_WRITE_DONE)		eim_wait_reg	<= 1'b0;		// write transaction done
			if (eim_fsm_state == EIM_FSM_STATE_READ_READY)		eim_wait_reg	<= 1'b0;		// read transaction done
			//
			if (eim_fsm_state == EIM_FSM_STATE_INIT)				eim_wait_reg	<= 1'b0;		// fsm is idle, no need to wait any more
			//
		end

	assign eim_wait_n = ~eim_wait_reg;


		/* These flags are used to generate 1-cycle pulses to trigger CDC transaction.
		 * Note that FSM goes from WRITE_LSB to WRITE_MSB and from READ_START to READ_WAIT
		 * unconditionally, so these flags will always be active for 1 cycle only, which
		 * is exactly what we need.
		 */

	wire	arbiter_write_req_pulse		= (eim_fsm_state == EIM_FSM_STATE_WRITE_LSB)  ? 1'b1 : 1'b0;
	wire	arbiter_read_req_pulse		= (eim_fsm_state == EIM_FSM_STATE_READ_START) ? 1'b1 : 1'b0;

		//
		// CDC Block
		//

	/* This block is used to transfer request data from BCLK clock domain to SYS_CLK clock domain and
	 * then transfer acknowledge from SYS_CLK to BCLK clock domain in return. Af first 1+1+14+32 = 48 bits
	 * are transfered, these are: write flag, read flag, address, write data. During read transaction
	 * some bogus write data is passed, which is not used later anyway. During read requests 32 bits of data
	 * are returned, during write requests 32 bits of bogus data are returned, that are never used later.
	 */

	eim_arbiter_cdc eim_cdc
	(
		.eim_clk			(eim_bclk),

		.eim_req			(arbiter_write_req_pulse | arbiter_read_req_pulse),
		.eim_ack			(eim_user_ack),

		.eim_din			({arbiter_write_req_pulse, arbiter_read_req_pulse, eim_addr_latch, da_ro, eim_write_lsb_latch}),
		.eim_dout		(eim_user_data),

		.sys_clk			(sys_clk),
		.sys_addr		(sys_addr),
		.sys_wren		(sys_wren),
		.sys_data_out	(sys_data_out),
		.sys_rden		(sys_rden),
		.sys_data_in	(sys_data_in)
	);


endmodule

//======================================================================
// EOF eim_arbiter.v
//======================================================================