diff options
| -rw-r--r-- | README.md | 26 | ||||
| -rw-r--r-- | attiny828.conf | 192 | ||||
| -rwxr-xr-x | upload.sh | 6 |
3 files changed, 223 insertions, 1 deletions
@@ -72,3 +72,29 @@ this directory with the name of the file as the only argument: Depending on permissions on your host system you might want to run the upload script as root. + +## GPIO on Cryptech HSM rev.03 + +The GPIO ports are located on JP5 (AVR_GPIO). From left to right, as seen when the marking is above the connector, the ports are: + + 1. 3V3 + 2. PORTC0 + 3. PORTC1 + 4. PORTC2 + 5. PORTC3 + 6. PORTC4 + 7. PORTC5 + 8. PORTC6 + 9. PORTC7 +10. GND + + +## Dependencies + +### Debian + +- apt-get install gcc-avr binutils-avr avr-libc avrdude + +### Fedora + +- dnf install avrdude avr-gcc avr-libc diff --git a/attiny828.conf b/attiny828.conf new file mode 100644 index 0000000..be65489 --- /dev/null +++ b/attiny828.conf @@ -0,0 +1,192 @@ +#------------------------------------------------------------ +# BEGIN: ATtiny828. +# +#------------------------------------------------------------ + +part + id = "t828"; + desc = "ATtiny828"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x93 0x14; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + +writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# END: ATtiny828. +#------------------------------------------------------------ @@ -1,6 +1,10 @@ #! /bin/sh HEXFILE=$1 -[ -z "$HEXFILE" ] && exit 1 + +if [ -z "$HEXFILE" ]; then + echo "usage: $0 [hexfile]" + exit 1 +fi avrdude -c usbtiny -p attiny828 -U flash:w:$HEXFILE |