/* * mgmt-cli.c * --------- * Management CLI code. * * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved. * Copyright: 2020, The Commons Conservancy Cryptech Project * SPDX-License-Identifier: BSD-3-Clause * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * - Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * - Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include /* Rename both CMSIS HAL_OK and libhal HAL_OK to disambiguate */ #define HAL_OK CMSIS_HAL_OK #include "stm-init.h" #include "stm-uart.h" #include "stm-led.h" #include "mgmt-cli.h" #include "mgmt-fpga.h" #include "mgmt-misc.h" #include "mgmt-show.h" #include "mgmt-test.h" #include "mgmt-keystore.h" #include "mgmt-masterkey.h" #include "mgmt-keywrap.h" #ifdef DO_TIMING #include "mgmt-timing.h" #endif #undef HAL_OK #define HAL_OK LIBHAL_OK #include "hal.h" #undef HAL_OK #ifndef CLI_UART_RECVBUF_SIZE #define CLI_UART_RECVBUF_SIZE 256 #endif typedef struct { unsigned ridx; unsigned widx; mgmt_cli_dma_state_t rx_state; uint8_t buf[CLI_UART_RECVBUF_SIZE]; } ringbuf_t; inline void ringbuf_init(ringbuf_t *rb) { memset(rb, 0, sizeof(*rb)); } /* return number of characters read */ inline int ringbuf_read_char(ringbuf_t *rb, uint8_t *c) { if (rb->ridx != rb->widx) { *c = rb->buf[rb->ridx]; if (++rb->ridx >= sizeof(rb->buf)) rb->ridx = 0; return 1; } return 0; } inline void ringbuf_write_char(ringbuf_t *rb, uint8_t c) { rb->buf[rb->widx] = c; if (++rb->widx >= sizeof(rb->buf)) rb->widx = 0; } static ringbuf_t uart_ringbuf; /* current character received from UART */ static uint8_t uart_rx; /* Callback for HAL_UART_Receive_DMA(). */ void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart) { huart = huart; ringbuf_write_char(&uart_ringbuf, uart_rx); } static void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *buf) { uart_send_string(buf); uart_send_string("\r\n"); } static ssize_t uart_cli_read(struct cli_def *cli __attribute__ ((unused)), void *buf, size_t count) { for (size_t i = 0; i < count; ++i) { while (ringbuf_read_char(&uart_ringbuf, (uint8_t *)(buf + i)) == 0) { } } return (ssize_t)count; } static ssize_t uart_cli_write(struct cli_def *cli __attribute__ ((unused)), const void *buf, size_t count) { uart_send_bytes((uint8_t *) buf, count); return (ssize_t)count; } int control_mgmt_uart_dma_rx(mgmt_cli_dma_state_t state) { if (state == DMA_RX_START) { if (uart_ringbuf.rx_state != DMA_RX_START) { ringbuf_init(&uart_ringbuf); HAL_UART_Receive_DMA(&huart_mgmt, &uart_rx, 1); uart_ringbuf.rx_state = DMA_RX_START; } return 1; } else if (state == DMA_RX_STOP) { if (HAL_UART_DMAStop(&huart_mgmt) != CMSIS_HAL_OK) return 0; uart_ringbuf.rx_state = DMA_RX_STOP; return 1; } return 0; } static struct cli_def *mgmt_cli_init(void) { struct cli_def *cli; cli = cli_init(); cli_read_callback(cli, uart_cli_read); cli_write_callback(cli, uart_cli_write); cli_print_callback(cli, uart_cli_print); cli_set_banner(cli, "Cryptech Alpha test CLI"); cli_set_hostname(cli, "cryptech"); return cli; } hal_user_t user; static int check_auth(const char *username, const char *password) { if (strcmp(username, "ct") != 0) return CLI_ERROR; if (strcmp(password, "ct") != 0) return CLI_ERROR; return CLI_OK; } int cli_main(void) { struct cli_def *cli; cli = mgmt_cli_init(); cli_set_auth_callback(cli, check_auth); configure_cli_show(cli); configure_cli_fpga(cli); configure_cli_misc(cli); configure_cli_keystore(cli); configure_cli_masterkey(cli); configure_cli_keywrap(cli); #ifdef DO_TIMING configure_cli_timing(cli); #endif while (1) { control_mgmt_uart_dma_rx(DMA_RX_START); cli_loop(cli, 0); /* cli_loop returns when the user enters 'quit' or 'exit' */ cli_print(cli, "\nLogging out...\n"); user = HAL_USER_NONE; } /*NOTREACHED*/ return -1; }