/**
******************************************************************************
* @file stm32f4xx_hal_pccard.c
* @author MCD Application Team
* @version V1.4.1
* @date 09-October-2015
* @brief PCCARD HAL module driver.
* This file provides a generic firmware to drive PCCARD memories mounted
* as external device.
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
This driver is a generic layered driver which contains a set of APIs used to
control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions
to interface with PCCARD devices. This driver is used for:
(+) PCCARD/Compact Flash memory configuration sequence using the function
HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for
both common and attribute spaces.
(+) Read PCCARD/Compact Flash memory maker and device IDs using the function
HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in
the CompactFlash_ID structure declared by the function caller.
(+) Access PCCARD/Compact Flash memory by read/write operations using the functions
HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() -
HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector.
(+) Perform PCCARD/Compact Flash Reset chip operation using the function
HAL_PCCARD_Reset()/HAL_CF_Reset.
(+) Perform PCCARD/Compact Flash erase sector operation using the function
HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector.
(+) Read the PCCARD/Compact Flash status operation using the function
HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus().
(+) You can monitor the PCCARD/Compact Flash device HAL state by calling
the function HAL_PCCARD_GetState()/HAL_CF_GetState()
[..]
(@) This driver is a set of generic APIs which handle standard PCCARD/compact flash
operations. If a PCCARD/Compact Flash device contains different operations
and/or implementations, it should be implemented separately.
@endverbatim
******************************************************************************
* @attention
*
* © COPYRIGHT(c) 2015 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
#ifdef HAL_PCCARD_MODULE_ENABLED
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/** @defgroup PCCARD PCCARD
* @brief PCCARD HAL module driver
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup PCCARD_Private_Defines PCCARD Private Defines
* @{
*/
#define PCCARD_TIMEOUT_READ_ID (uint32_t)0x0000FFFF
#define PCCARD_TIMEOUT_READ_WRITE_SECTOR (uint32_t)0x0000FFFF
#define PCCARD_TIMEOUT_ERASE_SECTOR (uint32_t)0x00000400
#define PCCARD_TIMEOUT_STATUS (uint32_t)0x01000000
#define PCCARD_STATUS_OK (uint8_t)0x58
#define PCCARD_STATUS_WRITE_OK (uint8_t)0x50
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function ----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions
* @{
*/
/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### PCCARD Initialization and de-initialization functions #####
==============================================================================
[..]
This section provides functions allowing to initialize/de-initialize
the PCCARD memory
@endverbatim
* @{
*/
/**
* @brief Perform the PCCARD memory Initialization sequence
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @param ComSpaceTiming: Common space timing structure
* @param AttSpaceTiming: Attribute space timing structure
* @param IOSpaceTiming: IO space timing structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
{
/* Check the PCCARD controller state */
if(hpccard == NULL)
{
return HAL_ERROR;
}
if(hpccard->State == HAL_PCCARD_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hpccard->Lock = HAL_UNLOCKED;
/* Initialize the low level hardware (MSP) */
HAL_PCCARD_MspInit(hpccard);
}
/* Initialize the PCCARD state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
/* Initialize PCCARD control Interface */
FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init));
/* Init PCCARD common space timing Interface */
FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming);
/* Init PCCARD attribute space timing Interface */
FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming);
/* Init PCCARD IO space timing Interface */
FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming);
/* Enable the PCCARD device */
__FMC_PCCARD_ENABLE(hpccard->Instance);
/* Update the PCCARD state */
hpccard->State = HAL_PCCARD_STATE_READY;
return HAL_OK;
}
/**
* @brief Perform the PCCARD memory De-initialization sequence
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
{
/* De-Initialize the low level hardware (MSP) */
HAL_PCCARD_MspDeInit(hpccard);
/* Configure the PCCARD registers with their reset values */
FMC_PCCARD_DeInit(hpccard->Instance);
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief PCCARD MSP Init
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval None
*/
__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_PCCARD_MspInit could be implemented in the user file
*/
}
/**
* @brief PCCARD MSP DeInit
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval None
*/
__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_PCCARD_MspDeInit could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions
* @brief Input Output and memory control functions
*
@verbatim
==============================================================================
##### PCCARD Input and Output functions #####
==============================================================================
[..]
This section provides functions allowing to use and control the PCCARD memory
@endverbatim
* @{
*/
/**
* @brief Read Compact Flash's ID.
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @param CompactFlash_ID: Compact flash ID structure.
* @param pStatus: pointer to compact flash status
* @retval HAL status
*
*/
HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
{
uint32_t timeout = PCCARD_TIMEOUT_READ_ID, index = 0;
uint8_t status = 0;
/* Process Locked */
__HAL_LOCK(hpccard);
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_BUSY;
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
/* Initialize the PCCARD status */
*pStatus = PCCARD_READY;
/* Send the Identify Command */
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = 0xECEC;
/* Read PCCARD IDs and timeout treatment */
do
{
/* Read the PCCARD status */
status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}while((status != PCCARD_STATUS_OK) && timeout);
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
else
{
/* Read PCCARD ID bytes */
for(index = 0; index < 16; index++)
{
CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA);
}
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief Read sector from PCCARD memory
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @param pBuffer: pointer to destination read buffer
* @param SectorAddress: Sector address to read
* @param pStatus: pointer to PCCARD status
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
{
uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
uint8_t status = 0;
/* Process Locked */
__HAL_LOCK(hpccard);
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_BUSY;
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
/* Initialize PCCARD status */
*pStatus = PCCARD_READY;
/* Set the parameters to write a sector */
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xE4A0;
do
{
/* wait till the Status = 0x80 */
status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}while((status == 0x80) && timeout);
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR;
do
{
/* wait till the Status = PCCARD_STATUS_OK */
status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}while((status != PCCARD_STATUS_OK) && timeout);
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
/* Read bytes */
for(; index < PCCARD_SECTOR_SIZE; index++)
{
*(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR);
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief Write sector to PCCARD memory
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @param pBuffer: pointer to source write buffer
* @param SectorAddress: Sector address to write
* @param pStatus: pointer to PCCARD status
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
{
uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
uint8_t status = 0;
/* Process Locked */
__HAL_LOCK(hpccard);
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_BUSY;
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
/* Initialize PCCARD status */
*pStatus = PCCARD_READY;
/* Set the parameters to write a sector */
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
*(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0x30A0;
do
{
/* Wait till the Status = PCCARD_STATUS_OK */
status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}while((status != PCCARD_STATUS_OK) && timeout);
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
/* Write bytes */
for(; index < PCCARD_SECTOR_SIZE; index++)
{
*(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++;
}
do
{
/* Wait till the Status = PCCARD_STATUS_WRITE_OK */
status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}while((status != PCCARD_STATUS_WRITE_OK) && timeout);
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief Erase sector from PCCARD memory
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @param SectorAddress: Sector address to erase
* @param pStatus: pointer to PCCARD status
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
{
uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR;
uint8_t status = 0;
/* Process Locked */
__HAL_LOCK(hpccard);
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_BUSY;
}
/* Update the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
/* Initialize PCCARD status */
*pStatus = PCCARD_READY;
/* Set the parameters to write a sector */
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW) = 0x00;
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00;
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress;
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = 0x01;
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD) = 0xA0;
*(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = ATA_ERASE_SECTOR_CMD;
/* wait till the PCCARD is ready */
status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
while((status != PCCARD_STATUS_WRITE_OK) && timeout)
{
status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}
if(timeout == 0)
{
*pStatus = PCCARD_TIMEOUT_ERROR;
}
/* Check the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief Reset the PCCARD memory
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard)
{
/* Process Locked */
__HAL_LOCK(hpccard);
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_BUSY;
}
/* Provide a SW reset and Read and verify the:
- PCCard Configuration Option Register at address 0x98000200 --> 0x80
- Card Configuration and Status Register at address 0x98000202 --> 0x00
- Pin Replacement Register at address 0x98000204 --> 0x0C
- Socket and Copy Register at address 0x98000206 --> 0x00
*/
/* Check the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_BUSY;
*(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION ) = 0x01;
/* Check the PCCARD controller state */
hpccard->State = HAL_PCCARD_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hpccard);
return HAL_OK;
}
/**
* @brief This function handles PCCARD device interrupt request.
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval HAL status
*/
void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard)
{
/* Check PCCARD interrupt Rising edge flag */
if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE))
{
/* PCCARD interrupt callback*/
HAL_PCCARD_ITCallback(hpccard);
/* Clear PCCARD interrupt Rising edge pending bit */
__FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE);
}
/* Check PCCARD interrupt Level flag */
if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL))
{
/* PCCARD interrupt callback*/
HAL_PCCARD_ITCallback(hpccard);
/* Clear PCCARD interrupt Level pending bit */
__FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL);
}
/* Check PCCARD interrupt Falling edge flag */
if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE))
{
/* PCCARD interrupt callback*/
HAL_PCCARD_ITCallback(hpccard);
/* Clear PCCARD interrupt Falling edge pending bit */
__FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE);
}
/* Check PCCARD interrupt FIFO empty flag */
if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT))
{
/* PCCARD interrupt callback*/
HAL_PCCARD_ITCallback(hpccard);
/* Clear PCCARD interrupt FIFO empty pending bit */
__FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT);
}
}
/**
* @brief PCCARD interrupt feature callback
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval None
*/
__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_PCCARD_ITCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup PCCARD_Exported_Functions_Group3 State functions
* @brief Peripheral State functions
*
@verbatim
==============================================================================
##### PCCARD State functions #####
==============================================================================
[..]
This subsection permits to get in run-time the status of the PCCARD controller
and the data flow.
@endverbatim
* @{
*/
/**
* @brief return the PCCARD controller state
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval HAL state
*/
HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard)
{
return hpccard->State;
}
/**
* @brief Get the compact flash memory status
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval New status of the PCCARD operation. This parameter can be:
* - CompactFlash_TIMEOUT_ERROR: when the previous operation generate
* a Timeout error
* - CompactFlash_READY: when memory is ready for the next operation
*/
HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard)
{
uint32_t timeout = PCCARD_TIMEOUT_STATUS, status_pccard = 0;
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_PCCARD_STATUS_ONGOING;
}
status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
while((status_pccard == PCCARD_BUSY) && timeout)
{
status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
timeout--;
}
if(timeout == 0)
{
status_pccard = PCCARD_TIMEOUT_ERROR;
}
/* Return the operation status */
return (HAL_PCCARD_StatusTypeDef) status_pccard;
}
/**
* @brief Reads the Compact Flash memory status using the Read status command
* @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
* the configuration information for PCCARD module.
* @retval The status of the Compact Flash memory. This parameter can be:
* - CompactFlash_BUSY: when memory is busy
* - CompactFlash_READY: when memory is ready for the next operation
* - CompactFlash_ERROR: when the previous operation generates error
*/
HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard)
{
uint8_t data = 0, status_pccard = PCCARD_BUSY;
/* Check the PCCARD controller state */
if(hpccard->State == HAL_PCCARD_STATE_BUSY)
{
return HAL_PCCARD_STATUS_ONGOING;
}
/* Read status operation */
data = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
if((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR)
{
status_pccard = PCCARD_TIMEOUT_ERROR;
}
else if((data & PCCARD_READY) == PCCARD_READY)
{
status_pccard = PCCARD_READY;
}
return (HAL_PCCARD_StatusTypeDef) status_pccard;
}
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#endif /* HAL_PCCARD_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h?h=ice40mkm&id=26f12903dab2fafeaaefb02349763618ce96d070'>26f1290
|
|