# Copyright (c) 2015-2016, NORDUnet A/S # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: # - Redistributions of source code must retain the above copyright notice, # this list of conditions and the following disclaimer. # # - Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # - Neither the name of the NORDUnet nor the names of its contributors may # be used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS # IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A # PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED # TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # absolute path, because we're going to be passing things to sub-makes export TOPLEVEL = $(shell pwd) # define board: dev-bridge or alpha BOARD = TARGET_CRYPTECH_ALPHA # Location of the Libraries folder from the STM32F4 Standard Peripheral Library LIBS_DIR = $(TOPLEVEL)/libraries MBED_DIR = $(LIBS_DIR)/mbed CMSIS_DIR = $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4 BOARD_DIR = $(CMSIS_DIR)/$(BOARD) RTOS_DIR = $(MBED_DIR)/rtos export LIBTFM_DIR = $(LIBS_DIR)/thirdparty/libtfm export LIBHAL_DIR = $(LIBS_DIR)/libhal export LIBCLI_DIR = $(LIBS_DIR)/libcli export LIBS = $(MBED_DIR)/libstmf4.a $(RTOS_DIR)/librtos.a # linker script export LDSCRIPT = $(BOARD_DIR)/TOOLCHAIN_GCC_ARM/STM32F429BI.ld export BOOTLOADER_LDSCRIPT = $(BOARD_DIR)/TOOLCHAIN_GCC_ARM/STM32F429BI_bootloader.ld # board-specific objects, to link into every project BOARD_OBJS = \ $(TOPLEVEL)/stm-init.o \ $(TOPLEVEL)/stm-fmc.o \ $(TOPLEVEL)/stm-uart.o \ $(TOPLEVEL)/syscalls.o \ $(BOARD_DIR)/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.o \ $(BOARD_DIR)/system_stm32f4xx.o \ $(BOARD_DIR)/stm32f4xx_hal_msp.o \ $(BOARD_DIR)/stm32f4xx_it.o ifeq (${BOARD},TARGET_CRYPTECH_ALPHA) BOARD_OBJS += \ $(TOPLEVEL)/stm-rtc.o \ $(TOPLEVEL)/spiflash_n25q128.o \ $(TOPLEVEL)/stm-fpgacfg.o \ $(TOPLEVEL)/stm-keystore.o \ $(TOPLEVEL)/stm-sdram.o \ $(TOPLEVEL)/stm-flash.o endif export BOARD_OBJS # cross-building tools PREFIX=arm-none-eabi- export CC=$(PREFIX)gcc export AS=$(PREFIX)as export AR=$(PREFIX)ar export OBJCOPY=$(PREFIX)objcopy export OBJDUMP=$(PREFIX)objdump export SIZE=$(PREFIX)size # whew, that's a lot of cflags CFLAGS = -ggdb -O2 -Wall -Warray-bounds #-Wextra CFLAGS += -mcpu=cortex-m4 -mthumb -mlittle-endian -mthumb-interwork CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 CFLAGS += -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F429xx CFLAGS += -D__CORTEX_M4 -DTARGET_STM -DTARGET_STM32F4 -DTARGET_STM32F429ZI -DTOOLCHAIN_GCC -D__FPU_PRESENT=1 -D$(BOARD) CFLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections CFLAGS += -std=c99 CFLAGS += -I $(TOPLEVEL) CFLAGS += -I $(MBED_DIR)/api CFLAGS += -I $(MBED_DIR)/rtos/rtos CFLAGS += -I $(MBED_DIR)/rtos/rtx/TARGET_CORTEX_M CFLAGS += -I $(MBED_DIR)/targets/cmsis CFLAGS += -I $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4 CFLAGS += -I $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4/$(BOARD) CFLAGS += -I $(MBED_DIR)/targets/hal/TARGET_STM/TARGET_STM32F4 CFLAGS += -I $(MBED_DIR)/targets/hal/TARGET_STM/TARGET_STM32F4/$(BOARD) export CFLAGS %.o : %.c $(CC) $(CFLAGS) -c -o $@ $< %.o : %.S $(CC) $(CFLAGS) -c -o $@ $< all: board-test cli-test libhal-test hsm init: git submodule update --init --recursive --remote $(MBED_DIR)/libstmf4.a: $(MAKE) -C $(MBED_DIR) board-test: $(BOARD_OBJS) $(LIBS) $(MAKE) -C projects/board-test cli-test: $(BOARD_OBJS) $(LIBS) $(LIBCLI_DIR)/libcli.a $(MAKE) -C projects/cli-test $(RTOS_DIR)/librtos.a: $(MAKE) -C $(RTOS_DIR) rtos-test: $(RTOS_OBJS) $(LIBS) $(MAKE) -C projects/rtos-test $(LIBTFM_DIR)/libtfm.a: $(MAKE) -C $(LIBTFM_DIR) PREFIX=$(PREFIX) $(LIBHAL_DIR)/libhal.a: $(LIBTFM_DIR)/libtfm.a $(MAKE) -C $(LIBHAL_DIR) IO_BUS=fmc RPC_SERVER=yes RPC_TRANSPORT=serial KS=volatile libhal.a $(LIBCLI_DIR)/libcli.a: $(MAKE) -C $(LIBCLI_DIR) libhal-test: $(BOARD_OBJS) $(LIBS) $(LIBHAL_DIR)/libhal.a $(MAKE) -C projects/libhal-test hsm: $(BOARD_OBJS) $(LIBS) $(LIBHAL_DIR)/libhal.a $(MAKE) -C projects/hsm bootloader: $(BOARD_OBJS) $(LIBS) $(MAKE) -C projects/bootloader # don't automatically delete objects, to avoid a lot of unnecessary rebuilding .SECONDARY: $(BOARD_OBJS) .PHONY: board-test rtos-test libhal-test cli-test clean: rm -f $(BOARD_OBJS) $(MAKE) -C projects/board-test clean $(MAKE) -C projects/cli-test clean $(MAKE) -C projects/rtos-test clean $(MAKE) -C projects/libhal-test clean $(MAKE) -C projects/hsm clean distclean: clean $(MAKE) -C $(MBED_DIR) clean $(MAKE) -C $(RTOS_DIR) clean $(MAKE) -C $(LIBHAL_DIR) clean $(MAKE) -C $(LIBTFM_DIR) clean mit/KiCAD/rev02_19.sch-bak?id=6010cb79da1b58fc5a71806273bb789840dc106b'>6010cb7
148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279