From 523d1f66453e9b92835ecc661085e4575426e661 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Wed, 18 May 2016 21:14:52 +0200 Subject: Add FPGA bitstream upload command to cli-test. This code needs more error checking etc. but together with the Python script 'filetransfer', a new bitstream may be loaded into the FPGA config memory like this: filetransfer --fpga /path/to/bitstream The bitstream is identified by 'file' e.g. like this: alpha_test_top.bit: Xilinx BIT data - from alpha_test_top.ncd;UserID=0xFFFFFFFF - for 7a200tfbg484 - built 2016/05/12(13:59:24) - data length 0xe0164 --- projects/cli-test/cli-test.c | 92 +++++++++++++++++++++++++++++- projects/cli-test/filetransfer | 126 ++++++++++++++++++++++++++++++++--------- 2 files changed, 189 insertions(+), 29 deletions(-) (limited to 'projects/cli-test') diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c index 6102d32..922fcba 100644 --- a/projects/cli-test/cli-test.c +++ b/projects/cli-test/cli-test.c @@ -35,6 +35,7 @@ #include "stm-init.h" #include "stm-led.h" #include "stm-uart.h" +#include "stm-fpgacfg.h" #include "mgmt-cli.h" #include @@ -55,16 +56,66 @@ int cmd_show_cpuspeed(struct cli_def *cli, const char *command, char *argv[], in } int cmd_filetransfer(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + uint32_t filesize = 0, crc = 0, my_crc = 0, n = 256, counter = 0; + uint8_t buf[256]; + + cli_print(cli, "OK, write file size (4 bytes), data in %li byte chunks, CRC-32 (4 bytes)", n); + + uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000); + cli_print(cli, "File size %li", filesize); + + while (filesize) { + if (filesize < n) { + n = filesize; + } + + if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) { + cli_print(cli, "Receive timed out"); + return CLI_ERROR; + } + filesize -= n; + my_crc = update_crc(my_crc, buf, n); + counter++; + uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4); + } + + cli_print(cli, "Send CRC-32"); + uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000); + cli_print(cli, "CRC-32 %li", crc); + if (crc == my_crc) { + cli_print(cli, "CRC checksum MATCHED"); + } else { + cli_print(cli, "CRC checksum did NOT match"); + } + + return CLI_OK; +} + +int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc) { uint32_t filesize = 0, crc = 0, my_crc = 0, n = 4096, counter = 0; uint8_t buf[4096]; - cli_print(cli, "OK, write file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)"); + fpgacfg_give_access_to_stm32(); + + cli_print(cli, "Checking if FPGA config memory is accessible"); + if (n25q128_check_id() != 1) { + cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed."); + return CLI_ERROR; + } + + cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)"); uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000); cli_print(cli, "File size %li", filesize); while (filesize) { + uint32_t page, offset; + uint8_t *ptr; + + memset(buf, 0xff, 4096); + if (filesize < n) { n = filesize; } @@ -75,6 +126,33 @@ int cmd_filetransfer(struct cli_def *cli, const char *command, char *argv[], int } filesize -= n; my_crc = update_crc(my_crc, buf, n); + + if ((counter % (N25Q128_SECTOR_SIZE / 4096)) == 0) { + /* first page in sector, need to erase sector */ + offset = (counter * 4096) / N25Q128_SECTOR_SIZE; + if (! n25q128_erase_sector(offset)) { + cli_print(cli, "Failed erasing sector at offset %li (counter = %li)", offset, counter); + return CLI_ERROR; + } + /* XXX add timeout and check for < 0 */ + while (n25q128_get_wip_flag()) { HAL_Delay(10); }; + } + + ptr = buf; + for (page = 0; page < 4096 / N25Q128_PAGE_SIZE; page++) { + offset = counter * (4096 / N25Q128_PAGE_SIZE) + page; + if (! n25q128_write_page(offset, ptr)) { + cli_print(cli, "Failed writing page %li at offset %li (counter = %li)", page, offset, counter); + return CLI_ERROR; + } + ptr += N25Q128_PAGE_SIZE; + + /* XXX add timeout and check for < 0 */ + while (n25q128_get_wip_flag()) { HAL_Delay(10); }; + + /* XXX read back data and verify it */ + } + counter++; uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4); } @@ -88,6 +166,8 @@ int cmd_filetransfer(struct cli_def *cli, const char *command, char *argv[], int cli_print(cli, "CRC checksum did NOT match"); } + fpgacfg_give_access_to_fpga(); + return CLI_OK; } @@ -119,6 +199,12 @@ main() struct cli_command cmd_filetransfer_s = {(char *) "filetransfer", cmd_filetransfer, 0, (char *) "Test file transfering", PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL, NULL, NULL}; + + struct cli_command cmd_fpga_s = {(char *) "fpga", NULL, 0, NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL, NULL, NULL}; + struct cli_command cmd_fpga_bitstream_s = {(char *) "bitstream", NULL, 0, NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL, NULL, NULL}; + struct cli_command cmd_fpga_bitstream_upload_s = {(char *) "upload", cmd_fpga_bitstream_upload, 0, + (char *) "Upload new FPGA bitstream", + PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL, NULL, NULL}; struct cli_command cmd_reboot_s = {(char *) "reboot", cmd_reboot, 0, (char *) "Reboot the STM32", PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL, NULL, NULL}; @@ -136,6 +222,10 @@ main() cli_register_command2(&cli, &cmd_filetransfer_s, NULL); + cli_register_command2(&cli, &cmd_fpga_s, NULL); + cli_register_command2(&cli, &cmd_fpga_bitstream_s, &cmd_fpga_s); + cli_register_command2(&cli, &cmd_fpga_bitstream_upload_s, &cmd_fpga_bitstream_s); + cli_register_command2(&cli, &cmd_reboot_s, NULL); led_off(LED_RED); diff --git a/projects/cli-test/filetransfer b/projects/cli-test/filetransfer index 674a7f1..2b74570 100755 --- a/projects/cli-test/filetransfer +++ b/projects/cli-test/filetransfer @@ -1,13 +1,74 @@ #!/usr/bin/python - +# +# Copyright (c) 2016, NORDUnet A/S All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# - Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# - Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# - Neither the name of the NORDUnet nor the names of its contributors may +# be used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +""" +Utility to test file upload (or FPGA bitstream upload. +""" import os import sys import time import struct import serial +import argparse from binascii import crc32 +CHUNK_SIZE = 256 +FPGA_CHUNK_SIZE = 4096 + + +def parse_args(): + """ + Parse the command line arguments + """ + parser = argparse.ArgumentParser(description = "File uploader", + add_help = True, + formatter_class = argparse.ArgumentDefaultsHelpFormatter, + ) + + parser.add_argument('--fpga', + dest='fpga', + action='store_true', default=False, + help='Perform FPGA bitstream upload', + ) + + parser.add_argument('--device', + dest='device', + default='/dev/ttyUSB0', + help='Name of management port USB serial device', + ) + + # positional argument(s) + parser.add_argument('filename') + + return parser.parse_args() + def _write(dst, data): for i in range(len(data)): @@ -46,41 +107,45 @@ def _execute(dst, cmd): response = _read(dst) return response -def send_file(filename, device='/dev/ttyUSB0', initiate=True): +def send_file(filename, args, dst): s = os.stat(filename) size = s.st_size src = open(filename, 'rb') - - dst = serial.Serial(device, 921600, timeout=0.1) - - if initiate: + if args.fpga: + # Skip header in FPGA bitstream file + size -= 0x64 + src.read(0x64) + chunk_size = FPGA_CHUNK_SIZE + response = _execute(dst, 'fpga bitstream upload') + else: + chunk_size = CHUNK_SIZE response = _execute(dst, 'filetransfer') - if 'OK' not in response: - sys.stderr.write('Device did not accept the filetransfer command (got {!r})\n'.format(response)) - return False + if 'OK' not in response: + sys.stderr.write('Device did not accept the upload command (got {!r})\n'.format(response)) + return False + crc = 0 + counter = 0 # 1. Write size of file (4 bytes) _write(dst, struct.pack('