From 2d08b2038a5cf14a92d8ca3e10fb3421e73e5b74 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Wed, 1 Jun 2016 13:47:46 +0200 Subject: Move FPGA related commands to mgmt-fpga.c --- projects/cli-test/mgmt-fpga.c | 174 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 projects/cli-test/mgmt-fpga.c (limited to 'projects/cli-test/mgmt-fpga.c') diff --git a/projects/cli-test/mgmt-fpga.c b/projects/cli-test/mgmt-fpga.c new file mode 100644 index 0000000..c20b7b2 --- /dev/null +++ b/projects/cli-test/mgmt-fpga.c @@ -0,0 +1,174 @@ +/* + * mgmt-fpga.c + * ----------- + * CLI code to manage the FPGA configuration etc. + * + * Copyright (c) 2016, NORDUnet A/S All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * - Neither the name of the NORDUnet nor the names of its contributors may + * be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "stm-init.h" +#include "stm-uart.h" +#include "stm-fpgacfg.h" +#include "mgmt-cli.h" +#include "mgmt-fpga.h" + +#include + + +extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len); + + +int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0, i; + uint32_t offset = 0, n = BITSTREAM_UPLOAD_CHUNK_SIZE; + uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE]; + + fpgacfg_access_control(ALLOW_ARM); + + cli_print(cli, "Checking if FPGA config memory is accessible"); + if (fpgacfg_check_id() != 1) { + cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed."); + return CLI_ERROR; + } + + cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)"); + + /* Read file size (4 bytes) */ + uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000); + cli_print(cli, "File size %li", filesize); + + while (filesize) { + /* By initializing buf to the same value that erased flash has (0xff), we don't + * have to try and be smart when writing the last page of data to the memory. + */ + memset(buf, 0xff, sizeof(buf)); + + if (filesize < n) { + n = filesize; + } + + if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) { + cli_print(cli, "Receive timed out"); + return CLI_ERROR; + } + filesize -= n; + + /* After reception of 4 KB but before ACKing we have "all" the time in the world to + * calculate CRC and write it to flash. + */ + my_crc = update_crc(my_crc, buf, n); + + if ((i = fpgacfg_write_data(offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE)) != 1) { + cli_print(cli, "Failed writing data at offset %li (counter = %li): %li", offset, counter, i); + return CLI_ERROR; + } + + offset += BITSTREAM_UPLOAD_CHUNK_SIZE; + + /* ACK this chunk by sending the current chunk counter (4 bytes) */ + counter++; + uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4); + } + + /* The sending side will now send it's calculated CRC-32 */ + cli_print(cli, "Send CRC-32"); + uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000); + cli_print(cli, "CRC-32 %li", crc); + if (crc == my_crc) { + cli_print(cli, "CRC checksum MATCHED"); + } else { + cli_print(cli, "CRC checksum did NOT match"); + } + + fpgacfg_access_control(ALLOW_FPGA); + + return CLI_OK; +} + +int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + fpgacfg_access_control(ALLOW_ARM); + + cli_print(cli, "Checking if FPGA config memory is accessible"); + if (fpgacfg_check_id() != 1) { + cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed."); + return CLI_ERROR; + } + + /* Erasing the whole config memory takes a while, we just need to erase the first sector. + * The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than + * the current one there should be no problem. + * + * This command could be made to accept an argument indicating the whole memory should be erased. + */ + if (! fpgacfg_erase_sectors(1)) { + cli_print(cli, "Erasing first sector in FPGA config memory failed"); + return CLI_ERROR; + } + + cli_print(cli, "Erased FPGA config memory"); + fpgacfg_access_control(ALLOW_FPGA); + + return CLI_OK; +} + +int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + fpgacfg_access_control(ALLOW_FPGA); + fpgacfg_reset_fpga(RESET_FULL); + cli_print(cli, "FPGA has been reset"); + + return CLI_OK; +} + +int cmd_fpga_reset_registers(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + fpgacfg_access_control(ALLOW_FPGA); + fpgacfg_reset_fpga(RESET_REGISTERS); + cli_print(cli, "FPGA registers have been reset"); + + return CLI_OK; +} + +void configure_cli_fpga(struct cli_def *cli) +{ + /* fpga */ + cli_command_root(fpga); + /* fpga reset */ + cli_command_node(fpga, reset, "Reset FPGA (config reset)"); + /* fpga reset registers */ + cli_command_node(fpga_reset, registers, "Reset FPGA registers (soft reset)"); + + cli_command_branch(fpga, bitstream); + /* fpga bitstream upload */ + cli_command_node(fpga_bitstream, upload, "Upload new FPGA bitstream"); + /* fpga bitstream erase */ + cli_command_node(fpga_bitstream, erase, "Erase FPGA config memory"); +} -- cgit v1.2.3