From 15d8d22092b0b92cea71a243e31df142e299e322 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 12 May 2016 19:45:01 +0200 Subject: Add build target for the alpha --- .../TARGET_CRYPTECH_ALPHA/README.txt | 1 + .../TOOLCHAIN_GCC_ARM/STM32F429BI.ld | 154 + .../TOOLCHAIN_GCC_ARM/startup_stm32f429xx.S | 566 ++ .../TOOLCHAIN_GCC_ARM/stm32f429bitx.ld | 186 + .../TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis.h | 38 + .../TARGET_CRYPTECH_ALPHA/cmsis_nvic.c | 55 + .../TARGET_CRYPTECH_ALPHA/cmsis_nvic.h | 55 + .../TARGET_CRYPTECH_ALPHA/hal_tick.c | 136 + .../TARGET_CRYPTECH_ALPHA/hal_tick.h | 60 + .../TARGET_CRYPTECH_ALPHA/stm32f429xx.h | 9037 ++++++++++++++++++++ .../TARGET_CRYPTECH_ALPHA/stm32f4xx.h | 232 + .../TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_conf.h | 406 + .../TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c | 180 + .../TARGET_CRYPTECH_ALPHA/system_stm32f4xx.c | 617 ++ .../TARGET_CRYPTECH_ALPHA/system_stm32f4xx.h | 123 + 15 files changed, 11846 insertions(+) create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/README.txt create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/STM32F429BI.ld create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.S create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/stm32f429bitx.ld create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.c create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.c create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f429xx.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_conf.h create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.c create mode 100644 libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.h (limited to 'libraries/mbed/targets') diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/README.txt b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/README.txt new file mode 100644 index 0000000..0e90d02 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/README.txt @@ -0,0 +1 @@ +Adapted from TARGET_DISCO_F429ZI. diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/STM32F429BI.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/STM32F429BI.ld new file mode 100644 index 0000000..c3aa304 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/STM32F429BI.ld @@ -0,0 +1,154 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048k + CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 192k +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.S b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.S new file mode 100644 index 0000000..c431df8 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.S @@ -0,0 +1,566 @@ +/** + ****************************************************************************** + * @file startup_stm32f429xx.s + * @author MCD Application Team + * @version V2.3.0 + * @date 02-March-2015 + * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + //bl __libc_init_array +/* Call the application's entry point.*/ + //bl main + // Calling the crt0 'cold-start' entry point. There __libc_init_array is called + // and when existing hardware_init_hook() and software_init_hook() before + // starting main(). software_init_hook() is available and has to be called due + // to initializsation when using rtos. + bl _start + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* Reserved */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC_IRQHandler */ + .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */ + .word DMA2D_IRQHandler /* DMA2D */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/stm32f429bitx.ld b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/stm32f429bitx.ld new file mode 100644 index 0000000..845bb6a --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/TOOLCHAIN_GCC_ARM/stm32f429bitx.ld @@ -0,0 +1,186 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F429BI Device with +** 2048KByte FLASH, 192KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. This file may only be built (assembled or compiled and linked) +** using the Atollic TrueSTUDIO(R) product. The use of this file together +** with other tools than Atollic TrueSTUDIO(R) is not permitted. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x2002FFFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 192K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis.h new file mode 100644 index 0000000..f0c2b2a --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis.h @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.c new file mode 100644 index 0000000..2da63fc --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.c @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "cmsis_nvic.h" + +#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM +#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { + uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t i; + + // Copy and switch to dynamic vectors if the first time called + if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) { + uint32_t *old_vectors = vectors; + vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS; + for (i=0; iVTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS; + } + vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + +uint32_t NVIC_GetVector(IRQn_Type IRQn) { + uint32_t *vectors = (uint32_t*)SCB->VTOR; + return vectors[IRQn + NVIC_USER_IRQ_OFFSET]; +} diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.h new file mode 100644 index 0000000..f8403da --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/cmsis_nvic.h @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +// STM32F429ZI +// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F +// MCU Peripherals: 91 vectors = 364 bytes from 0x40 to 0x1AB +// Total: 107 vectors = 428 bytes (0x1AC) to be reserved in RAM +#define NVIC_NUM_VECTORS 107 +#define NVIC_USER_IRQ_OFFSET 16 + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector); +uint32_t NVIC_GetVector(IRQn_Type IRQn); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.c new file mode 100644 index 0000000..4d71242 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.c @@ -0,0 +1,136 @@ +/** + ****************************************************************************** + * @file hal_tick.c + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#include "hal_tick.h" + +TIM_HandleTypeDef TimMasterHandle; +uint32_t PreviousVal = 0; + +void us_ticker_irq_handler(void); + +void timer_irq_handler(void) { + // Channel 1 for mbed timeout + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1); + us_ticker_irq_handler(); + } + + // Channel 2 for HAL tick + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2); + uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle); + if ((val - PreviousVal) >= HAL_TICK_DELAY) { + // Increment HAL variable + HAL_IncTick(); + // Prepare next interrupt + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY); + PreviousVal = val; +#if 0 // For DEBUG only + HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6); +#endif + } + } +} + +// Reconfigure the HAL tick using a standard timer instead of systick. +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + uint32_t PclkFreq; + + // Get clock configuration + // Note: PclkFreq contains here the Latency (not used after) + HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq); + + // Get TIM5 clock value + PclkFreq = HAL_RCC_GetPCLK1Freq(); + + // Enable timer clock + TIM_MST_RCC; + + // Reset timer + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; + + // Configure time base + TimMasterHandle.Instance = TIM_MST; + TimMasterHandle.Init.Period = 0xFFFFFFFF; + + // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx + if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1) + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick + else + TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick + + TimMasterHandle.Init.ClockDivision = 0; + TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimMasterHandle.Init.RepetitionCounter = 0; + HAL_TIM_OC_Init(&TimMasterHandle); + + NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler); + NVIC_EnableIRQ(TIM_MST_IRQ); + + // Channel 1 for mbed timeout + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1); + + // Channel 2 for HAL tick + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2); + PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle); + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY); + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); + +#if 0 // For DEBUG only + __GPIOB_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FAST; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); +#endif + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.h new file mode 100644 index 0000000..2e6f01b --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/hal_tick.h @@ -0,0 +1,60 @@ +/** + ****************************************************************************** + * @file hal_tick.h + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#ifndef __HAL_TICK_H +#define __HAL_TICK_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#define TIM_MST TIM5 +#define TIM_MST_IRQ TIM5_IRQn +#define TIM_MST_RCC __TIM5_CLK_ENABLE() + +#define TIM_MST_RESET_ON __TIM5_FORCE_RESET() +#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET() + +#define HAL_TICK_DELAY (1000) // 1 ms + +#ifdef __cplusplus +} +#endif + +#endif // __HAL_TICK_H + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f429xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f429xx.h new file mode 100644 index 0000000..1da4d8c --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f429xx.h @@ -0,0 +1,9037 @@ +/** + ****************************************************************************** + * @file stm32f429xx.h + * @author MCD Application Team + * @version V2.3.2 + * @date 26-June-2015 + * @brief CMSIS STM32F429xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32f429xx + * @{ + */ + +#ifndef __STM32F429xx_H +#define __STM32F429xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 0x0001 /*!< Core revision r0p1 */ +#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F4XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32f4xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ + uint32_t RESERVED1; /*!< Reserved, 0x78 */ + uint32_t RESERVED2; /*!< Reserved, 0x7C */ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED3; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FMC_Bank2_3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ + __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ + __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ + __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ + __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ +} FMC_Bank4_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ + __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */ + __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ + __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ + __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ + __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ + __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ + __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */ + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */ + uint32_t RESERVED7; /*!< Reserved, 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + + +/** + * @brief __USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h*/ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /* Reserved 030h*/ + __IO uint32_t GCCFG; /* General Purpose IO Register 038h*/ + __IO uint32_t CID; /* User ID Register 03Ch*/ + uint32_t Reserved40[48]; /* Reserved 040h-0FFh*/ + __IO uint32_t HPTXFSIZ; /* Host Periodic Tx FIFO Size Reg 100h*/ + __IO uint32_t DIEPTXF[0x0F];/* dev Periodic Transmit FIFO */ +} +USB_OTG_GlobalTypeDef; + + +/** + * @brief __device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /* dev Configuration Register 800h*/ + __IO uint32_t DCTL; /* dev Control Register 804h*/ + __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/ + uint32_t Reserved0C; /* Reserved 80Ch*/ + __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/ + __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/ + __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/ + __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/ + uint32_t Reserved20; /* Reserved 820h*/ + uint32_t Reserved9; /* Reserved 824h*/ + __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/ + __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/ + __IO uint32_t DTHRCTL; /* dev thr 830h*/ + __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/ + __IO uint32_t DEACHINT; /* dedicated EP interrupt 838h*/ + __IO uint32_t DEACHMSK; /* dedicated EP msk 83Ch*/ + uint32_t Reserved40; /* dedicated EP mask 840h*/ + __IO uint32_t DINEP1MSK; /* dedicated EP mask 844h*/ + uint32_t Reserved44[15]; /* Reserved 844-87Ch*/ + __IO uint32_t DOUTEP1MSK; /* dedicated EP msk 884h*/ +} +USB_OTG_DeviceTypeDef; + + +/** + * @brief __IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/ + __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ + __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ + __IO uint32_t DTXFSTS;/*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ + uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ +} +USB_OTG_INEndpointTypeDef; + + +/** + * @brief __OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ + __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ + __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ + uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ +} +USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief __Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /* Host Configuration Register 400h*/ + __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ + __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ + uint32_t Reserved40C; /* Reserved 40Ch*/ + __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ + __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ + __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ +} +USB_OTG_HostTypeDef; + +/** + * @brief __Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; + __IO uint32_t HCSPLT; + __IO uint32_t HCINT; + __IO uint32_t HCINTMSK; + __IO uint32_t HCTSIZ; + __IO uint32_t HCDMA; + uint32_t Reserved[2]; +} +USB_OTG_HostChannelTypeDef; +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 2 MB) base address in the alias region */ +#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */ +#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */ +#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */ +#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ +#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */ +#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC registers base address */ +#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */ +#define SRAM2_BB_BASE ((uint32_t)0x22380000) /*!< SRAM2(16 KB) base address in the bit-band region */ +#define SRAM3_BB_BASE ((uint32_t)0x22400000) /*!< SRAM3(64 KB) base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ +#define BKPSRAM_BB_BASE ((uint32_t)0x42480000) /*!< Backup SRAM(4 KB) base address in the bit-band region */ +#define FLASH_END ((uint32_t)0x081FFFFF) /*!< FLASH end address */ +#define CCMDATARAM_END ((uint32_t)0x1000FFFF) /*!< CCM data RAM end address */ + +/* Legacy defines */ +#define SRAM_BASE SRAM1_BASE +#define SRAM_BB_BASE SRAM1_BB_BASE + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300) +#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104) + +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000) + +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800) + +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) +#define FMC_Bank2_3_R_BASE (FMC_R_BASE + 0x0060) +#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE ((uint32_t )0xE0042000) + +/*!< USB registers base address */ +#define USB_OTG_HS_PERIPH_BASE ((uint32_t )0x40040000) +#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000) + +#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000) +#define USB_OTG_DEVICE_BASE ((uint32_t )0x800) +#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900) +#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00) +#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20) +#define USB_OTG_HOST_BASE ((uint32_t )0x400) +#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440) +#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500) +#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20) +#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00) +#define USB_OTG_FIFO_BASE ((uint32_t )0x1000) +#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000) + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank2_3 ((FMC_Bank2_3_TypeDef *) FMC_Bank2_3_R_BASE) +#define FMC_Bank4 ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint32_t)0x00000001) /*!
© COPYRIGHT(c) 2015 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx + * @{ + */ + +#ifndef __STM32F4xx_H +#define __STM32F4xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F4) +#define STM32F4 +#endif /* STM32F4 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ +#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \ + !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \ + !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE) && !defined (STM32F446xx) + /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */ + /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */ + /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */ + /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */ + /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */ + /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */ + #define STM32F429xx /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG, + STM32F439NI, STM32F429IG and STM32F429II Devices */ + /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, + STM32F439NI, STM32F439IG and STM32F439II Devices */ + /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */ + /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */ + /* #define STM32F411xE */ /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */ + /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC, + and STM32F446ZE Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + #define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V2.3.2 + */ +#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ +#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ +#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\ + |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\ + |(__STM32F4xx_CMSIS_DEVICE_VERSION)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F405xx) + #include "stm32f405xx.h" +#elif defined(STM32F415xx) + #include "stm32f415xx.h" +#elif defined(STM32F407xx) + #include "stm32f407xx.h" +#elif defined(STM32F417xx) + #include "stm32f417xx.h" +#elif defined(STM32F427xx) + #include "stm32f427xx.h" +#elif defined(STM32F437xx) + #include "stm32f437xx.h" +#elif defined(STM32F429xx) + #include "stm32f429xx.h" +#elif defined(STM32F439xx) + #include "stm32f439xx.h" +#elif defined(STM32F401xC) + #include "stm32f401xc.h" +#elif defined(STM32F401xE) + #include "stm32f401xe.h" +#elif defined(STM32F411xE) + #include "stm32f411xe.h" +#elif defined(STM32F446xx) + #include "stm32f446xx.h" +#else + #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macro + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f4xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F4xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_conf.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_conf.h new file mode 100644 index 0000000..437ba0d --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_conf.h @@ -0,0 +1,406 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @author MCD Application Team + * @version V1.2.1 + * @date 13-March-2015 + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +//#define HAL_ADC_MODULE_ENABLED +//#define HAL_CAN_MODULE_ENABLED +//#define HAL_CRC_MODULE_ENABLED +//#define HAL_CRYP_MODULE_ENABLED +//#define HAL_DAC_MODULE_ENABLED +//#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +//#define HAL_DMA2D_MODULE_ENABLED +//#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +//#define HAL_NAND_MODULE_ENABLED +//#define HAL_NOR_MODULE_ENABLED +//#define HAL_PCCARD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +//#define HAL_SDRAM_MODULE_ENABLED +//#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +//#define HAL_I2C_MODULE_ENABLED +//#define HAL_I2S_MODULE_ENABLED +//#define HAL_IWDG_MODULE_ENABLED +//#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +//#define HAL_RTC_MODULE_ENABLED +//#define HAL_SAI_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +//#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +//#define HAL_USART_MODULE_ENABLED +//#define HAL_IRDA_MODULE_ENABLED +//#define HAL_SMARTCARD_MODULE_ENABLED +//#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +//#define HAL_PCD_MODULE_ENABLED +//#define HAL_HCD_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c new file mode 100644 index 0000000..81f2367 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c @@ -0,0 +1,180 @@ +/** +****************************************************************************** +* File Name : stm32f4xx_hal_msp.c +* Description : This file provides code for the MSP Initialization +* and de-Initialization codes. +****************************************************************************** +* +* COPYRIGHT(c) 2015 STMicroelectronics +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + /* XXX + * Fredrik's HAL_MspInit sets this to NVIC_PRIORITYGROUP_4 (as just + * happened in HAL_Init), but then he resets it to NVIC_PRIORITYGROUP_0 + * in stm_init. */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0); + + /* System interrupt init*/ + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng) +{ + + if(hrng->Instance==RNG) + { + /* USER CODE BEGIN RNG_MspInit 0 */ + + /* USER CODE END RNG_MspInit 0 */ + /* Peripheral clock enable */ + __RNG_CLK_ENABLE(); + /* USER CODE BEGIN RNG_MspInit 1 */ + + /* USER CODE END RNG_MspInit 1 */ + } + +} + +void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng) +{ + + if(hrng->Instance==RNG) + { + /* USER CODE BEGIN RNG_MspDeInit 0 */ + + /* USER CODE END RNG_MspDeInit 0 */ + /* Peripheral clock disable */ + __RNG_CLK_DISABLE(); + } + /* USER CODE BEGIN RNG_MspDeInit 1 */ + + /* USER CODE END RNG_MspDeInit 1 */ + +} + + + +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram) +{ +} + + +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram) +{ +} + +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + if (huart->Instance == USART1) { + /* Peripheral clock enable */ + __USART1_CLK_ENABLE(); + __GPIOA_CLK_ENABLE(); + + /**USART1 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + HAL_NVIC_SetPriority(USART1_IRQn, 0, 1); + HAL_NVIC_EnableIRQ(USART1_IRQn); + } else if (huart->Instance == USART2) { + /* Peripheral clock enable */ + __USART2_CLK_ENABLE(); + __GPIOA_CLK_ENABLE(); + + /**USART2 GPIO Configuration + PA9 ------> USART2_TX + PA10 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + HAL_NVIC_SetPriority(USART2_IRQn, 0, 1); + HAL_NVIC_EnableIRQ(USART2_IRQn); + } +} + +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if (huart->Instance == USART1) { + /* Peripheral clock disable */ + __USART1_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3); + + HAL_NVIC_DisableIRQ(USART1_IRQn); + } else if (huart->Instance == USART2) { + /* Peripheral clock disable */ + __USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10); + + HAL_NVIC_DisableIRQ(USART2_IRQn); + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.c new file mode 100644 index 0000000..c2816d0 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.c @@ -0,0 +1,617 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @version V2.4.0 + * @date 14-August-2015 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + + +#include "stm32f4xx.h" +#include "hal_tick.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/* #define DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM) + #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM " +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +void SetSysClock(void); +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = 16000000; // At this stage the HSI is used as system clock + HAL_Init(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + SystemCoreClockUpdate(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration ------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000CAFFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** System Clock Configuration + * + * HSE crystal at 25 MHz, end result is 180 MHz clock. + */ +void SetSysClock(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + + __PWR_CLK_ENABLE(); + + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 25; + RCC_OscInitStruct.PLL.PLLN = 360; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 4; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + HAL_PWREx_ActivateOverDrive(); + + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 + |RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); +} + +/** + * @brief This function is executed in case of error occurrence. + * @param None + * @retval None + */ +void mbed_die(void) +{ +#ifdef HAL_GPIO_MODULE_ENABLED + //HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET); + HAL_GPIO_WritePin(GPIOJ, GPIO_PIN_1, GPIO_PIN_SET); +#endif + while (1) { ; } +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ + +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.h b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.h new file mode 100644 index 0000000..aba8801 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/system_stm32f4xx.h @@ -0,0 +1,123 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.h + * @author MCD Application Team + * @version V2.3.2 + * @date 26-June-2015 + * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2015 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F4XX_H +#define __SYSTEM_STM32F4XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F4xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F4xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +extern void SetSysClock(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F4XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3