From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c | 1857 -------------------- 1 file changed, 1857 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c deleted file mode 100644 index bbf2323..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c +++ /dev/null @@ -1,1857 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_usart.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief USART HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The USART HAL driver can be used as follows: - - (#) Declare a USART_HandleTypeDef handle structure. - (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit () API: - (##) Enable the USARTx interface clock. - (##) USART pins configuration: - (+++) Enable the clock for the USART GPIOs. - (+++) Configure these USART pins as alternate function pull-up. - (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), - HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() - HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx stream. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx Stream. - (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream. - - (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware - flow control and Mode(Receiver/Transmitter) in the husart Init structure. - - (#) Initialize the USART registers by calling the HAL_USART_Init() API: - (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_USART_MspInit(&husart) API. - - -@@- The specific USART interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. - - (#) Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_USART_Transmit() - (+) Receive an amount of data in blocking mode using HAL_USART_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT() - (+) At transmission end of transfer HAL_USART_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_USART_TxCpltCallback - (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT() - (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_RxCpltCallback - (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_USART_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA() - (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback - (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_USART_TxCpltCallback - (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA() - (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback - (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_USART_RxCpltCallback - (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_USART_ErrorCallback - (+) Pause the DMA Transfer using HAL_USART_DMAPause() - (+) Resume the DMA Transfer using HAL_USART_DMAResume() - (+) Stop the DMA Transfer using HAL_USART_DMAStop() - - *** USART HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in USART HAL driver. - - (+) __HAL_USART_ENABLE: Enable the USART peripheral - (+) __HAL_USART_DISABLE: Disable the USART peripheral - (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not - (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag - (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt - (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt - - [..] - (@) You can refer to the USART HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup USART USART - * @brief HAL USART Synchronous module driver - * @{ - */ -#ifdef HAL_USART_MODULE_ENABLED -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup USART_Private_Constants - * @{ - */ -#define DUMMY_DATA 0xFFFF -#define USART_TIMEOUT_VALUE 22000 -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup USART_Private_Functions - * @{ - */ -static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart); -static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart); -static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart); -static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart); -static void USART_SetConfig (USART_HandleTypeDef *husart); -static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void USART_DMAError(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup USART_Exported_Functions USART Exported Functions - * @{ - */ - -/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and Configuration functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USART - in asynchronous and in synchronous modes. - (+) For the asynchronous mode only these parameters can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - Depending on the frame length defined by the M bit (8-bits or 9-bits), - please refer to Reference manual for possible USART frame formats. - (++) USART polarity - (++) USART phase - (++) USART LastBit - (++) Receiver/transmitter modes - - [..] - The HAL_USART_Init() function follows the USART synchronous configuration - procedure (details for the procedure are available in reference manual (RM0329)). - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the USART mode according to the specified - * parameters in the USART_InitTypeDef and create the associated handle. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) -{ - /* Check the USART handle allocation */ - if(husart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_USART_INSTANCE(husart->Instance)); - - if(husart->State == HAL_USART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - husart->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - HAL_USART_MspInit(husart); - } - - husart->State = HAL_USART_STATE_BUSY; - - /* Set the USART Communication parameters */ - USART_SetConfig(husart); - - /* In USART mode, the following bits must be kept cleared: - - LINEN bit in the USART_CR2 register - - HDSEL, SCEN and IREN bits in the USART_CR3 register */ - husart->Instance->CR2 &= ~USART_CR2_LINEN; - husart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL); - - /* Enable the Peripheral */ - __HAL_USART_ENABLE(husart); - - /* Initialize the USART state */ - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State= HAL_USART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the USART peripheral. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) -{ - /* Check the USART handle allocation */ - if(husart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_USART_INSTANCE(husart->Instance)); - - husart->State = HAL_USART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_USART_DISABLE(husart); - - /* DeInit the low level hardware */ - HAL_USART_MspDeInit(husart); - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(husart); - - return HAL_OK; -} - -/** - * @brief USART MSP Init. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ - __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_MspInit could be implemented in the user file - */ -} - -/** - * @brief USART MSP DeInit. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ - __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup USART_Exported_Functions_Group2 IO operation functions - * @brief USART Transmit and Receive functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART synchronous - data transfers. - - [..] - The USART supports master mode only: it cannot receive or send data related to an input - clock (SCLK is always an output). - - (#) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode: The communication is performed using Interrupts - or DMA, These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated USART IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() - user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_USART_ErrorCallback() user callback will be executed when a communication - error is detected - - (#) Blocking mode APIs are : - (++) HAL_USART_Transmit() in simplex mode - (++) HAL_USART_Receive() in full duplex receive only - (++) HAL_USART_TransmitReceive() in full duplex mode - - (#) Non Blocking mode APIs with Interrupt are : - (++) HAL_USART_Transmit_IT()in simplex mode - (++) HAL_USART_Receive_IT() in full duplex receive only - (++) HAL_USART_TransmitReceive_IT() in full duplex mode - (++) HAL_USART_IRQHandler() - - (#) Non Blocking mode functions with DMA are : - (++) HAL_USART_Transmit_DMA()in simplex mode - (++) HAL_USART_Receive_DMA() in full duplex receive only - (++) HAL_USART_TransmitReceie_DMA() in full duplex mode - (++) HAL_USART_DMAPause() - (++) HAL_USART_DMAResume() - (++) HAL_USART_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_USART_TxHalfCpltCallback() - (++) HAL_USART_TxCpltCallback() - (++) HAL_USART_RxHalfCpltCallback() - (++) HAL_USART_RxCpltCallback() - (++) HAL_USART_ErrorCallback() - (++) HAL_USART_TxRxCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Simplex Send an amount of data in blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout) -{ - uint16_t* tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(husart); - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_TX; - - husart->TxXferSize = Size; - husart->TxXferCount = Size; - while(husart->TxXferCount > 0) - { - husart->TxXferCount--; - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - /* Wait for TC flag in order to write data in DR */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pTxData; - husart->Instance->DR = (*tmp & (uint16_t)0x01FF); - if(husart->Init.Parity == USART_PARITY_NONE) - { - pTxData += 2; - } - else - { - pTxData += 1; - } - } - else - { - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - husart->Instance->DR = (*pTxData++ & (uint8_t)0xFF); - } - } - - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - husart->State = HAL_USART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Receive an amount of data in blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pRxData: Pointer to data buffer - * @param Size: Amount of data to be received - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) -{ - uint16_t* tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_RX; - - husart->RxXferSize = Size; - husart->RxXferCount = Size; - /* Check the remain data to be received */ - while(husart->RxXferCount > 0) - { - husart->RxXferCount--; - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - /* Send dummy byte in order to generate clock */ - husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF); - - /* Wait for RXNE Flag */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pRxData ; - if(husart->Init.Parity == USART_PARITY_NONE) - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); - pRxData +=2; - } - else - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); - pRxData +=1; - } - } - else - { - /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send Dummy Byte in order to generate clock */ - husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF); - - /* Wait until RXNE flag is set to receive the byte */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if(husart->Init.Parity == USART_PARITY_NONE) - { - /* Receive data */ - *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); - } - else - { - /* Receive data */ - *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); - } - - } - } - - husart->State = HAL_USART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode). - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data transmitted buffer - * @param pRxData: Pointer to data received buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) -{ - uint16_t* tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_RX; - - husart->RxXferSize = Size; - husart->TxXferSize = Size; - husart->TxXferCount = Size; - husart->RxXferCount = Size; - - /* Check the remain data to be received */ - while(husart->TxXferCount > 0) - { - husart->TxXferCount--; - husart->RxXferCount--; - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - /* Wait for TC flag in order to write data in DR */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pTxData; - husart->Instance->DR = (*tmp & (uint16_t)0x01FF); - if(husart->Init.Parity == USART_PARITY_NONE) - { - pTxData += 2; - } - else - { - pTxData += 1; - } - - /* Wait for RXNE Flag */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pRxData ; - if(husart->Init.Parity == USART_PARITY_NONE) - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); - pRxData += 2; - } - else - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); - pRxData += 1; - } - } - else - { - /* Wait for TC flag in order to write data in DR */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FF); - - /* Wait for RXNE Flag */ - if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if(husart->Init.Parity == USART_PARITY_NONE) - { - /* Receive data */ - *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); - } - else - { - /* Receive data */ - *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); - } - } - } - - husart->State = HAL_USART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Simplex Send an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - * @note The USART errors are not managed to avoid the overrun error. - */ -HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) -{ - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pTxBuffPtr = pTxData; - husart->TxXferSize = Size; - husart->TxXferCount = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_TX; - - /* The USART Error Interrupts: (Frame error, Noise error, Overrun error) - are not managed by the USART transmit process to avoid the overrun interrupt - when the USART mode is configured for transmit and receive "USART_MODE_TX_RX" - to benefit for the frame error and noise interrupts the USART mode should be - configured only for transmit "USART_MODE_TX" - The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error, - Noise error interrupt */ - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - /* Enable the USART Transmit Data Register Empty Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Simplex Receive an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pRxData: Pointer to data buffer - * @param Size: Amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) -{ - if(husart->State == HAL_USART_STATE_READY) - { - if((pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pRxBuffPtr = pRxData; - husart->RxXferSize = Size; - husart->RxXferCount = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_RX; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - /* Enable the USART Data Register not empty Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE); - - /* Enable the USART Parity Error Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_PE); - - /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_USART_ENABLE_IT(husart, USART_IT_ERR); - - /* Send dummy byte in order to generate the clock for the slave to send data */ - husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking). - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data transmitted buffer - * @param pRxData: Pointer to data received buffer - * @param Size: Amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pRxBuffPtr = pRxData; - husart->RxXferSize = Size; - husart->RxXferCount = Size; - husart->pTxBuffPtr = pTxData; - husart->TxXferSize = Size; - husart->TxXferCount = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_TX_RX; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - /* Enable the USART Data Register not empty Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE); - - /* Enable the USART Parity Error Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_PE); - - /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_USART_ENABLE_IT(husart, USART_IT_ERR); - - /* Enable the USART Transmit Data Register Empty Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Simplex Send an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) -{ - uint32_t *tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pTxBuffPtr = pTxData; - husart->TxXferSize = Size; - husart->TxXferCount = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_TX; - - /* Set the USART DMA transfer complete callback */ - husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; - - /* Set the USART DMA Half transfer complete callback */ - husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; - - /* Set the DMA error callback */ - husart->hdmatx->XferErrorCallback = USART_DMAError; - - /* Enable the USART transmit DMA Stream */ - tmp = (uint32_t*)&pTxData; - HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); - - /* Clear the TC flag in the SR register by writing 0 to it */ - __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the USART CR3 register */ - husart->Instance->CR3 |= USART_CR3_DMAT; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Receive an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pRxData: Pointer to data buffer - * @param Size: Amount of data to be received - * @retval HAL status - * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave. - * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. - */ -HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) -{ - uint32_t *tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pRxBuffPtr = pRxData; - husart->RxXferSize = Size; - husart->pTxBuffPtr = pRxData; - husart->TxXferSize = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_RX; - - /* Set the USART DMA Rx transfer complete callback */ - husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; - - /* Set the USART DMA Half transfer complete callback */ - husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; - - /* Set the USART DMA Rx transfer error callback */ - husart->hdmarx->XferErrorCallback = USART_DMAError; - - /* Enable the USART receive DMA Stream */ - tmp = (uint32_t*)&pRxData; - HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size); - - /* Enable the USART transmit DMA Stream: the transmit stream is used in order - to generate in the non-blocking mode the clock to the slave device, - this mode isn't a simplex receive mode but a full-duplex receive one */ - HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); - - /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer - when using the USART in circular mode */ - __HAL_USART_CLEAR_OREFLAG(husart); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the USART CR3 register */ - husart->Instance->CR3 |= USART_CR3_DMAR; - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the USART CR3 register */ - husart->Instance->CR3 |= USART_CR3_DMAT; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param pTxData: Pointer to data transmitted buffer - * @param pRxData: Pointer to data received buffer - * @param Size: Amount of data to be received - * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - uint32_t *tmp; - - if(husart->State == HAL_USART_STATE_READY) - { - if((pTxData == NULL) || (pRxData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(husart); - - husart->pRxBuffPtr = pRxData; - husart->RxXferSize = Size; - husart->pTxBuffPtr = pTxData; - husart->TxXferSize = Size; - - husart->ErrorCode = HAL_USART_ERROR_NONE; - husart->State = HAL_USART_STATE_BUSY_TX_RX; - - /* Set the USART DMA Rx transfer complete callback */ - husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; - - /* Set the USART DMA Half transfer complete callback */ - husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; - - /* Set the USART DMA Tx transfer complete callback */ - husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; - - /* Set the USART DMA Half transfer complete callback */ - husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; - - /* Set the USART DMA Tx transfer error callback */ - husart->hdmatx->XferErrorCallback = USART_DMAError; - - /* Set the USART DMA Rx transfer error callback */ - husart->hdmarx->XferErrorCallback = USART_DMAError; - - /* Enable the USART receive DMA Stream */ - tmp = (uint32_t*)&pRxData; - HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size); - - /* Enable the USART transmit DMA Stream */ - tmp = (uint32_t*)&pTxData; - HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size); - - /* Clear the TC flag in the SR register by writing 0 to it */ - __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC); - - /* Clear the Overrun flag: mandatory for the second transfer in circular mode */ - __HAL_USART_CLEAR_OREFLAG(husart); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the USART CR3 register */ - husart->Instance->CR3 |= USART_CR3_DMAR; - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the USART CR3 register */ - husart->Instance->CR3 |= USART_CR3_DMAT; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pauses the DMA Transfer. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) -{ - /* Process Locked */ - __HAL_LOCK(husart); - - /* Disable the USART DMA Tx request */ - husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT); - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; -} - -/** - * @brief Resumes the DMA Transfer. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) -{ - /* Process Locked */ - __HAL_LOCK(husart); - - /* Enable the USART DMA Tx request */ - husart->Instance->CR3 |= USART_CR3_DMAT; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_OK; -} - -/** - * @brief Stops the DMA Transfer. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback(): - when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() - */ - - /* Abort the USART DMA Tx Stream */ - if(husart->hdmatx != NULL) - { - HAL_DMA_Abort(husart->hdmatx); - } - /* Abort the USART DMA Rx Stream */ - if(husart->hdmarx != NULL) - { - HAL_DMA_Abort(husart->hdmarx); - } - - /* Disable the USART Tx/Rx DMA requests */ - husart->Instance->CR3 &= ~USART_CR3_DMAT; - husart->Instance->CR3 &= ~USART_CR3_DMAR; - - husart->State = HAL_USART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief This function handles USART interrupt request. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) -{ - uint32_t tmp1 = 0, tmp2 = 0; - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_PE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE); - /* USART parity error interrupt occurred -----------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - __HAL_USART_CLEAR_PEFLAG(husart); - husart->ErrorCode |= HAL_USART_ERROR_PE; - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_FE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR); - /* USART frame error interrupt occurred ------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - __HAL_USART_CLEAR_FEFLAG(husart); - husart->ErrorCode |= HAL_USART_ERROR_FE; - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_NE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR); - /* USART noise error interrupt occurred ------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - __HAL_USART_CLEAR_NEFLAG(husart); - husart->ErrorCode |= HAL_USART_ERROR_NE; - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_ORE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR); - /* USART Over-Run interrupt occurred ---------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - __HAL_USART_CLEAR_OREFLAG(husart); - husart->ErrorCode |= HAL_USART_ERROR_ORE; - } - - if(husart->ErrorCode != HAL_USART_ERROR_NONE) - { - /* Set the USART state ready to be able to start again the process */ - husart->State = HAL_USART_STATE_READY; - - HAL_USART_ErrorCallback(husart); - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE); - /* USART in mode Receiver --------------------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - if(husart->State == HAL_USART_STATE_BUSY_RX) - { - USART_Receive_IT(husart); - } - else - { - USART_TransmitReceive_IT(husart); - } - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TXE); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE); - /* USART in mode Transmitter -----------------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - if(husart->State == HAL_USART_STATE_BUSY_TX) - { - USART_Transmit_IT(husart); - } - else - { - USART_TransmitReceive_IT(husart); - } - } - - tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TC); - tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC); - /* USART in mode Transmitter (transmission end) ----------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - USART_EndTransmit_IT(husart); - } -} - -/** - * @brief Tx Transfer completed callbacks. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ - __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callbacks. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ - __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callbacks. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx/Rx Transfers completed callback for the non-blocking process. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief USART error callbacks. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ - __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_USART_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief USART State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Errors functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to return the State of - USART communication - process, return Peripheral Errors occurred during communication process - (+) HAL_USART_GetState() API can be helpful to check in run-time the state - of the USART peripheral. - (+) HAL_USART_GetError() check in run-time errors that could be occurred during - communication. -@endverbatim - * @{ - */ - -/** - * @brief Returns the USART state. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL state - */ -HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart) -{ - return husart->State; -} - -/** - * @brief Return the USART error code - * @param husart : pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART. - * @retval USART Error Code - */ -uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart) -{ - return husart->ErrorCode; -} - -/** - * @} - */ - - -/** - * @brief DMA USART transmit process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* DMA Normal mode */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) - { - husart->TxXferCount = 0; - if(husart->State == HAL_USART_STATE_BUSY_TX) - { - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the USART CR3 register */ - CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); - - /* Enable the USART Transmit Complete Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_TC); - } - } - /* DMA Circular mode */ - else - { - if(husart->State == HAL_USART_STATE_BUSY_TX) - { - HAL_USART_TxCpltCallback(husart); - } - } -} - -/** - * @brief DMA USART transmit process half complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - HAL_USART_TxHalfCpltCallback(husart); -} - -/** - * @brief DMA USART receive process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* DMA Normal mode */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) - { - husart->RxXferCount = 0; - if(husart->State == HAL_USART_STATE_BUSY_RX) - { - /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit - in the USART CR3 register */ - husart->Instance->CR3 &= ~(USART_CR3_DMAR); - - husart->State= HAL_USART_STATE_READY; - HAL_USART_RxCpltCallback(husart); - } - /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ - else - { - /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit - in the USART CR3 register */ - husart->Instance->CR3 &= ~(USART_CR3_DMAR); - husart->Instance->CR3 &= ~(USART_CR3_DMAT); - - husart->State= HAL_USART_STATE_READY; - HAL_USART_TxRxCpltCallback(husart); - } - } - /* DMA circular mode */ - else - { - if(husart->State == HAL_USART_STATE_BUSY_RX) - { - HAL_USART_RxCpltCallback(husart); - } - /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ - else - { - HAL_USART_TxRxCpltCallback(husart); - } - } -} - -/** - * @brief DMA USART receive process half complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - HAL_USART_RxHalfCpltCallback(husart); -} - -/** - * @brief DMA USART communication error callback. - * @param hdma: DMA handle - * @retval None - */ -static void USART_DMAError(DMA_HandleTypeDef *hdma) -{ - USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - husart->RxXferCount = 0; - husart->TxXferCount = 0; - husart->ErrorCode |= HAL_USART_ERROR_DMA; - husart->State= HAL_USART_STATE_READY; - - HAL_USART_ErrorCallback(husart); -} - -/** - * @brief This function handles USART Communication Timeout. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @param Flag: specifies the USART flag to check. - * @param Status: The new Flag status (SET or RESET). - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - if(Status == RESET) - { - while(__HAL_USART_GET_FLAG(husart, Flag) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); - __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); - __HAL_USART_DISABLE_IT(husart, USART_IT_PE); - __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); - - husart->State= HAL_USART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_TIMEOUT; - } - } - } - } - else - { - while(__HAL_USART_GET_FLAG(husart, Flag) != RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); - __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); - __HAL_USART_DISABLE_IT(husart, USART_IT_PE); - __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); - - husart->State= HAL_USART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(husart); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - - -/** - * @brief Simplex Send an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - * @note The USART errors are not managed to avoid the overrun error. - */ -static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart) -{ - uint16_t* tmp; - - if(husart->State == HAL_USART_STATE_BUSY_TX) - { - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - tmp = (uint16_t*) husart->pTxBuffPtr; - husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); - if(husart->Init.Parity == USART_PARITY_NONE) - { - husart->pTxBuffPtr += 2; - } - else - { - husart->pTxBuffPtr += 1; - } - } - else - { - husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF); - } - - if(--husart->TxXferCount == 0) - { - /* Disable the USART Transmit data register empty Interrupt */ - __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); - - /* Enable the USART Transmit Complete Interrupt */ - __HAL_USART_ENABLE_IT(husart, USART_IT_TC); - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Wraps up transmission in non blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart) -{ - /* Disable the USART Transmit Complete Interrupt */ - __HAL_USART_DISABLE_IT(husart, USART_IT_TC); - - /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); - - husart->State = HAL_USART_STATE_READY; - - HAL_USART_TxCpltCallback(husart); - - return HAL_OK; -} - -/** - * @brief Simplex Receive an amount of data in non-blocking mode. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart) -{ - uint16_t* tmp; - if(husart->State == HAL_USART_STATE_BUSY_RX) - { - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - tmp = (uint16_t*) husart->pRxBuffPtr; - if(husart->Init.Parity == USART_PARITY_NONE) - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); - husart->pRxBuffPtr += 2; - } - else - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); - husart->pRxBuffPtr += 1; - } - if(--husart->RxXferCount != 0x00) - { - /* Send dummy byte in order to generate the clock for the slave to send the next data */ - husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF); - } - } - else - { - if(husart->Init.Parity == USART_PARITY_NONE) - { - *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); - } - else - { - *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); - } - - if(--husart->RxXferCount != 0x00) - { - /* Send dummy byte in order to generate the clock for the slave to send the next data */ - husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF); - } - } - - if(husart->RxXferCount == 0) - { - /* Disable the USART RXNE Interrupt */ - __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); - - /* Disable the USART Parity Error Interrupt */ - __HAL_USART_DISABLE_IT(husart, USART_IT_PE); - - /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); - - husart->State = HAL_USART_STATE_READY; - HAL_USART_RxCpltCallback(husart); - - return HAL_OK; - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking). - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval HAL status - */ -static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart) -{ - uint16_t* tmp; - - if(husart->State == HAL_USART_STATE_BUSY_TX_RX) - { - if(husart->TxXferCount != 0x00) - { - if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET) - { - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - tmp = (uint16_t*) husart->pTxBuffPtr; - husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); - if(husart->Init.Parity == USART_PARITY_NONE) - { - husart->pTxBuffPtr += 2; - } - else - { - husart->pTxBuffPtr += 1; - } - } - else - { - husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF); - } - husart->TxXferCount--; - - /* Check the latest data transmitted */ - if(husart->TxXferCount == 0) - { - __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); - } - } - } - - if(husart->RxXferCount != 0x00) - { - if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET) - { - if(husart->Init.WordLength == USART_WORDLENGTH_9B) - { - tmp = (uint16_t*) husart->pRxBuffPtr; - if(husart->Init.Parity == USART_PARITY_NONE) - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF); - husart->pRxBuffPtr += 2; - } - else - { - *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF); - husart->pRxBuffPtr += 1; - } - } - else - { - if(husart->Init.Parity == USART_PARITY_NONE) - { - *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF); - } - else - { - *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F); - } - } - husart->RxXferCount--; - } - } - - /* Check the latest data received */ - if(husart->RxXferCount == 0) - { - __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE); - - /* Disable the USART Parity Error Interrupt */ - __HAL_USART_DISABLE_IT(husart, USART_IT_PE); - - /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); - - husart->State = HAL_USART_STATE_READY; - - HAL_USART_TxRxCpltCallback(husart); - - return HAL_OK; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configures the USART peripheral. - * @param husart: pointer to a USART_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -static void USART_SetConfig(USART_HandleTypeDef *husart) -{ - uint32_t tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_INSTANCE(husart->Instance)); - assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); - assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); - assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); - assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); - assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); - assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); - assert_param(IS_USART_PARITY(husart->Init.Parity)); - assert_param(IS_USART_MODE(husart->Init.Mode)); - - /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the - receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */ - husart->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); - - /*---------------------------- USART CR2 Configuration ---------------------*/ - tmpreg = husart->Instance->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP)); - /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/ - /* Set CPOL bit according to husart->Init.CLKPolarity value */ - /* Set CPHA bit according to husart->Init.CLKPhase value */ - /* Set LBCL bit according to husart->Init.CLKLastBit value */ - /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */ - tmpreg |= (uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity | - husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits); - /* Write to USART CR2 */ - husart->Instance->CR2 = (uint32_t)tmpreg; - - /*-------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = husart->Instance->CR1; - - /* Clear M, PCE, PS, TE, RE and OVER8 bits */ - tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ - USART_CR1_RE | USART_CR1_OVER8)); - - /* Configure the USART Word Length, Parity and mode: - Set the M bits according to husart->Init.WordLength value - Set PCE and PS bits according to husart->Init.Parity value - Set TE and RE bits according to husart->Init.Mode value - Force OVER8 bit to 1 in order to reach the max USART frequencies */ - tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; - - /* Write to USART CR1 */ - husart->Instance->CR1 = (uint32_t)tmpreg; - - /*-------------------------- USART CR3 Configuration -----------------------*/ - /* Clear CTSE and RTSE bits */ - husart->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)); - - /*-------------------------- USART BRR Configuration -----------------------*/ - if((husart->Instance == USART1) || (husart->Instance == USART6)) - { - husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate); - } - else - { - husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate); - } -} - -/** - * @} - */ - -#endif /* HAL_USART_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3