From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c | 2298 -------------------- 1 file changed, 2298 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c deleted file mode 100644 index 481a52f..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c +++ /dev/null @@ -1,2298 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spi.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief SPI HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Serial Peripheral Interface (SPI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The SPI HAL driver can be used as follows: - - (#) Declare a SPI_HandleTypeDef handle structure, for example: - SPI_HandleTypeDef hspi; - - (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API: - (##) Enable the SPIx interface clock - (##) SPI pins configuration - (+++) Enable the clock for the SPI GPIOs - (+++) Configure these SPI pins as alternate function push-pull - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the SPIx interrupt priority - (+++) Enable the NVIC SPI IRQ handle - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx Stream - (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream - - (#) Program the Mode, Direction , Data size, Baudrate Prescaler, NSS - management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. - - (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: - (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_SPI_MspInit() API. - [..] - Circular mode restriction: - (#) The DMA circular mode cannot be used when the SPI is configured in these modes: - (##) Master 2Lines RxOnly - (##) Master 1Line Rx - (#) The CRC feature is not managed when the DMA circular mode is enabled - (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs - the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks - - - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SPI SPI - * @brief SPI HAL module driver - * @{ - */ - -#ifdef HAL_SPI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define SPI_TIMEOUT_VALUE 10 -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup SPI_Private_Functions - * @{ - */ -static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi); -static void SPI_TxISR(SPI_HandleTypeDef *hspi); -static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi); -static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi); -static void SPI_RxISR(SPI_HandleTypeDef *hspi); -static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi); -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAError(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Functions SPI Exported Functions - * @{ - */ - -/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the SPIx peripheral: - - (+) User must implement HAL_SPI_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_SPI_Init() to configure the selected device with - the selected configuration: - (++) Mode - (++) Direction - (++) Data Size - (++) Clock Polarity and Phase - (++) NSS Management - (++) BaudRate Prescaler - (++) FirstBit - (++) TIMode - (++) CRC Calculation - (++) CRC Polynomial if CRC enabled - - (+) Call the function HAL_SPI_DeInit() to restore the default configuration - of the selected SPIx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the SPI according to the specified parameters - * in the SPI_InitTypeDef and create the associated handle. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) -{ - /* Check the SPI handle allocation */ - if(hspi == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_MODE(hspi->Init.Mode)); - assert_param(IS_SPI_DIRECTION_MODE(hspi->Init.Direction)); - assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); - assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); - assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); - assert_param(IS_SPI_NSS(hspi->Init.NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); - assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); - assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); - assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); - - if(hspi->State == HAL_SPI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hspi->Lock = HAL_UNLOCKED; - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_SPI_MspInit(hspi); - } - - hspi->State = HAL_SPI_STATE_BUSY; - - /* Disable the selected SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - - /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ - /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management, - Communication speed, First bit and CRC calculation state */ - hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize | - hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) | - hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation); - - /* Configure : NSS management */ - hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode); - - /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ - /* Configure : CRC Polynomial */ - hspi->Instance->CRCPR = hspi->Init.CRCPolynomial; - - /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ - hspi->Instance->I2SCFGR &= (uint32_t)(~SPI_I2SCFGR_I2SMOD); - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the SPI peripheral - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) -{ - /* Check the SPI handle allocation */ - if(hspi == NULL) - { - return HAL_ERROR; - } - - /* Disable the SPI Peripheral Clock */ - __HAL_SPI_DISABLE(hspi); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_SPI_MspDeInit(hspi); - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief SPI MSP Init - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ - __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) - { - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_MspInit could be implemented in the user file - */ -} - -/** - * @brief SPI MSP DeInit - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ - __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of functions allowing to manage the SPI - data transfers. - - [..] The SPI supports master and slave mode : - - (#) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode: The communication is performed using Interrupts - or DMA, These APIs return the HAL status. - The end of the data processing will be indicated through the - dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected - - (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) - exist for 1Line (simplex) and 2Lines (full duplex) modes. - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pTxBuffPtr = pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->TxISR = 0; - hspi->RxISR = 0; - hspi->RxXferSize = 0; - hspi->RxXferCount = 0; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Configure communication direction : 1Line */ - SPI_1LINE_TX(hspi); - } - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01)) - { - hspi->Instance->DR = (*hspi->pTxBuffPtr++); - hspi->TxXferCount--; - } - while(hspi->TxXferCount > 0) - { - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - hspi->Instance->DR = (*hspi->pTxBuffPtr++); - hspi->TxXferCount--; - } - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - } - /* Transmit data in 16 Bit mode */ - else - { - if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01)) - { - hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); - hspi->pTxBuffPtr+=2; - hspi->TxXferCount--; - } - while(hspi->TxXferCount > 0) - { - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); - hspi->pTxBuffPtr+=2; - hspi->TxXferCount--; - } - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - } - - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - return HAL_TIMEOUT; - } - - /* Wait until Busy flag is reset before disabling SPI */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - return HAL_TIMEOUT; - } - - /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */ - if(hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - __IO uint16_t tmpreg; - uint32_t tmp = 0; - - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pRxBuffPtr = pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = 0; - hspi->TxISR = 0; - hspi->TxXferSize = 0; - hspi->TxXferCount = 0; - - /* Configure communication direction : 1Line */ - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - SPI_1LINE_RX(hspi); - } - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) - { - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); - } - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Receive data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - while(hspi->RxXferCount > 1) - { - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - hspi->RxXferCount--; - } - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - } - /* Receive data in 16 Bit mode */ - else - { - while(hspi->RxXferCount > 1) - { - /* Wait until RXNE flag is set to read data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - hspi->RxXferCount--; - } - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - } - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Receive last data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - } - /* Receive last data in 16 Bit mode */ - else - { - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - } - hspi->RxXferCount--; - - /* Wait until RXNE flag is set: CRC Received */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - return HAL_TIMEOUT; - } - - /* Read CRC to Flush RXNE flag */ - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); - } - - if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - - tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR); - /* Check if CRC error occurred */ - if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET)) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - - /* Reset CRC Calculation */ - SPI_RESET_CRC(hspi); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit and Receive an amount of data in blocking mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData: pointer to transmission data buffer - * @param pRxData: pointer to reception data buffer to be - * @param Size: amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) -{ - __IO uint16_t tmpreg; - uint32_t tmpstate = 0, tmp = 0; - - tmpstate = hspi->State; - if((tmpstate == HAL_SPI_STATE_READY) || (tmpstate == HAL_SPI_STATE_BUSY_RX)) - { - if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if(hspi->State == HAL_SPI_STATE_READY) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Configure communication */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pRxBuffPtr = pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - hspi->pTxBuffPtr = pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = 0; - hspi->TxISR = 0; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit and Receive data in 16 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01))) - { - hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); - hspi->pTxBuffPtr+=2; - hspi->TxXferCount--; - } - if(hspi->TxXferCount == 0) - { - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - hspi->RxXferCount--; - } - else - { - while(hspi->TxXferCount > 0) - { - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); - hspi->pTxBuffPtr+=2; - hspi->TxXferCount--; - - /* Enable CRC Transmission */ - if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - hspi->RxXferCount--; - } - /* Receive the last byte */ - if(hspi->Init.Mode == SPI_MODE_SLAVE) - { - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - hspi->RxXferCount--; - } - } - } - /* Transmit and Receive data in 8 Bit mode */ - else - { - if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01))) - { - hspi->Instance->DR = (*hspi->pTxBuffPtr++); - hspi->TxXferCount--; - } - if(hspi->TxXferCount == 0) - { - /* Enable CRC Transmission */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->RxXferCount--; - } - else - { - while(hspi->TxXferCount > 0) - { - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - hspi->Instance->DR = (*hspi->pTxBuffPtr++); - hspi->TxXferCount--; - - /* Enable CRC Transmission */ - if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - hspi->RxXferCount--; - } - if(hspi->Init.Mode == SPI_MODE_SLAVE) - { - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - hspi->RxXferCount--; - } - } - } - - /* Read CRC from DR to close CRC calculation process */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - return HAL_TIMEOUT; - } - /* Read CRC */ - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); - } - - /* Wait until Busy flag is reset before disabling SPI */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - return HAL_TIMEOUT; - } - - hspi->State = HAL_SPI_STATE_READY; - - tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR); - /* Check if CRC error occurred */ - if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET)) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit an amount of data in no-blocking mode with Interrupt - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->TxISR = &SPI_TxISR; - hspi->pTxBuffPtr = pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = 0; - hspi->RxXferSize = 0; - hspi->RxXferCount = 0; - - /* Configure communication direction : 1Line */ - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - SPI_1LINE_TX(hspi); - } - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE)); - }else - { - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); - } - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in no-blocking mode with Interrupt - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->RxISR = &SPI_RxISR; - hspi->pRxBuffPtr = pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size ; - - /*Init field not used in handle to zero */ - hspi->TxISR = 0; - hspi->TxXferSize = 0; - hspi->TxXferCount = 0; - - /* Configure communication direction : 1Line */ - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - SPI_1LINE_RX(hspi); - } - else if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); - } - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Note : The SPI must be enabled after unlocking current process - to avoid the risk of SPI interrupt handle execution before current - process unlock */ - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit and Receive an amount of data in no-blocking mode with Interrupt - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData: pointer to transmission data buffer - * @param pRxData: pointer to reception data buffer to be - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - uint32_t tmpstate = 0; - - tmpstate = hspi->State; - if((tmpstate == HAL_SPI_STATE_READY) || \ - ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX))) - { - if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if(hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Configure communication */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->TxISR = &SPI_TxISR; - hspi->pTxBuffPtr = pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - hspi->RxISR = &SPI_2LinesRxISR; - hspi->pRxBuffPtr = pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Enable TXE, RXNE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit an amount of data in no-blocking mode with DMA - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pTxBuffPtr = pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->TxISR = 0; - hspi->RxISR = 0; - hspi->RxXferSize = 0; - hspi->RxXferCount = 0; - - /* Configure communication direction : 1Line */ - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - SPI_1LINE_TX(hspi); - } - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Set the SPI TxDMA Half transfer complete callback */ - hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; - - /* Set the SPI TxDMA transfer complete callback */ - hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; - - /* Set the DMA error callback */ - hspi->hdmatx->XferErrorCallback = SPI_DMAError; - - /* Enable the Tx DMA Stream */ - HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable Tx DMA Request */ - hspi->Instance->CR2 |= SPI_CR2_TXDMAEN; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in no-blocking mode with DMA - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData: pointer to data buffer - * @note When the CRC feature is enabled the pData Length must be Size + 1. - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - if(hspi->State == HAL_SPI_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Configure communication */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pRxBuffPtr = pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = 0; - hspi->TxISR = 0; - hspi->TxXferSize = 0; - hspi->TxXferCount = 0; - - /* Configure communication direction : 1Line */ - if(hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - SPI_1LINE_RX(hspi); - } - else if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER)) - { - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); - } - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Set the SPI RxDMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - - /* Set the SPI Rx DMA transfer complete callback */ - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Enable the Rx DMA Stream */ - HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable Rx DMA Request */ - hspi->Instance->CR2 |= SPI_CR2_RXDMAEN; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit and Receive an amount of data in no-blocking mode with DMA - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData: pointer to transmission data buffer - * @param pRxData: pointer to reception data buffer - * @note When the CRC feature is enabled the pRxData Length must be Size + 1 - * @param Size: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - uint32_t tmpstate = 0; - tmpstate = hspi->State; - if((tmpstate == HAL_SPI_STATE_READY) || ((hspi->Init.Mode == SPI_MODE_MASTER) && \ - (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX))) - { - if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if(hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Configure communication */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - - hspi->pTxBuffPtr = (uint8_t*)pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - hspi->pRxBuffPtr = (uint8_t*)pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = 0; - hspi->TxISR = 0; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ - if(hspi->State == HAL_SPI_STATE_BUSY_RX) - { - /* Set the SPI Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - } - else - { - /* Set the SPI Tx/Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; - - hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; - } - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Enable the Rx DMA Stream */ - HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount); - - /* Enable Rx DMA Request */ - hspi->Instance->CR2 |= SPI_CR2_RXDMAEN; - - /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing - is performed in DMA reception complete callback */ - hspi->hdmatx->XferCpltCallback = NULL; - - if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) - { - /* Set the DMA error callback */ - hspi->hdmatx->XferErrorCallback = SPI_DMAError; - } - else - { - hspi->hdmatx->XferErrorCallback = NULL; - } - - /* Enable the Tx DMA Stream */ - HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - /* Check if the SPI is already enabled */ - if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable Tx DMA Request */ - hspi->Instance->CR2 |= SPI_CR2_TXDMAEN; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pauses the DMA Transfer. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Disable the SPI DMA Tx & Rx requests */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN); - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Resumes the DMA Transfer. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Enable the SPI DMA Tx & Rx requests */ - hspi->Instance->CR2 |= SPI_CR2_TXDMAEN; - hspi->Instance->CR2 |= SPI_CR2_RXDMAEN; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Stops the DMA Transfer. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): - when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() - */ - - /* Abort the SPI DMA tx Stream */ - if(hspi->hdmatx != NULL) - { - HAL_DMA_Abort(hspi->hdmatx); - } - /* Abort the SPI DMA rx Stream */ - if(hspi->hdmarx != NULL) - { - HAL_DMA_Abort(hspi->hdmarx); - } - - /* Disable the SPI DMA Tx & Rx requests */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN); - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN); - - hspi->State = HAL_SPI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief This function handles SPI interrupt request. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) -{ - uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0; - - tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE); - tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE); - tmp3 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR); - /* SPI in mode Receiver and Overrun not occurred ---------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET) && (tmp3 == RESET)) - { - hspi->RxISR(hspi); - return; - } - - tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE); - tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE); - /* SPI in mode Transmitter ---------------------------------------------------*/ - if((tmp1 != RESET) && (tmp2 != RESET)) - { - hspi->TxISR(hspi); - return; - } - - if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_ERR) != RESET) - { - /* SPI CRC error interrupt occurred ---------------------------------------*/ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } - /* SPI Mode Fault error interrupt occurred --------------------------------*/ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_MODF; - __HAL_SPI_CLEAR_MODFFLAG(hspi); - } - - /* SPI Overrun error interrupt occurred -----------------------------------*/ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET) - { - if(hspi->State != HAL_SPI_STATE_BUSY_TX) - { - hspi->ErrorCode |= HAL_SPI_ERROR_OVR; - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - } - - /* SPI Frame error interrupt occurred -------------------------------------*/ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FRE; - __HAL_SPI_CLEAR_FREFLAG(hspi); - } - - /* Call the Error call Back in case of Errors */ - if(hspi->ErrorCode!=HAL_SPI_ERROR_NONE) - { - hspi->State = HAL_SPI_STATE_READY; - HAL_SPI_ErrorCallback(hspi); - } - } -} - -/** - * @brief Tx Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_RxCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_TxRxCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_TxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_RxHalfCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SPI_TxRxHalfCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief SPI error callbacks - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ - __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) -{ - /* NOTE : - This function Should not be modified, when the callback is needed, - the HAL_SPI_ErrorCallback() could be implemented in the user file. - - The ErrorCode parameter in the hspi handle is updated by the SPI processes - and user can use HAL_SPI_GetError() API to check the latest error occurred. - */ -} - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief SPI control functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the SPI. - (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral - (+) HAL_SPI_GetError() check in run-time Errors occurring during communication -@endverbatim - * @{ - */ - -/** - * @brief Return the SPI state - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL state - */ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) -{ - return hspi->State; -} - -/** - * @brief Return the SPI error code - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval SPI Error Code - */ -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) -{ - return hspi->ErrorCode; -} - -/** - * @} - */ - - /** - * @brief Interrupt Handler to close Tx transfer - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval void - */ -static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi) -{ - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE )); - - /* Disable ERR interrupt if Receive process is finished */ - if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) == RESET) - { - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR)); - - /* Wait until Busy flag is reset before disabling SPI */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */ - if(hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - /* Check if Errors has been detected during transfer */ - if(hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - /* Check if we are in Tx or in Rx/Tx Mode */ - if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - HAL_SPI_TxRxCpltCallback(hspi); - } - else - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - HAL_SPI_TxCpltCallback(hspi); - } - } - else - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - /* Call Error call back in case of Error */ - HAL_SPI_ErrorCallback(hspi); - } - } -} - -/** - * @brief Interrupt Handler to transmit amount of data in no-blocking mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval void - */ -static void SPI_TxISR(SPI_HandleTypeDef *hspi) -{ - /* Transmit data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - hspi->Instance->DR = (*hspi->pTxBuffPtr++); - } - /* Transmit data in 16 Bit mode */ - else - { - hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr); - hspi->pTxBuffPtr+=2; - } - hspi->TxXferCount--; - - if(hspi->TxXferCount == 0) - { - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* calculate and transfer CRC on Tx line */ - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - SPI_TxCloseIRQHandler(hspi); - } -} - -/** - * @brief Interrupt Handler to close Rx transfer - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval void - */ -static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi) -{ - __IO uint16_t tmpreg; - - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until RXNE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Read CRC to reset RXNE flag */ - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); - - /* Wait until RXNE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Check if CRC error occurred */ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - - /* Reset CRC Calculation */ - SPI_RESET_CRC(hspi); - } - } - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE)); - - /* if Transmit process is finished */ - if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) == RESET) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR)); - - if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Check if Errors has been detected during transfer */ - if(hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - /* Check if we are in Rx or in Rx/Tx Mode */ - if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX) - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - HAL_SPI_TxRxCpltCallback(hspi); - } - else - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - HAL_SPI_RxCpltCallback(hspi); - } - } - else - { - /* Set state to READY before run the Callback Complete */ - hspi->State = HAL_SPI_STATE_READY; - /* Call Error call back in case of Error */ - HAL_SPI_ErrorCallback(hspi); - } - } -} - -/** - * @brief Interrupt Handler to receive amount of data in 2Lines mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval void - */ -static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi) -{ - /* Receive data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - } - /* Receive data in 16 Bit mode */ - else - { - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - } - hspi->RxXferCount--; - - if(hspi->RxXferCount==0) - { - SPI_RxCloseIRQHandler(hspi); - } -} - -/** - * @brief Interrupt Handler to receive amount of data in no-blocking mode - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval void - */ -static void SPI_RxISR(SPI_HandleTypeDef *hspi) -{ - /* Receive data in 8 Bit mode */ - if(hspi->Init.DataSize == SPI_DATASIZE_8BIT) - { - (*hspi->pRxBuffPtr++) = hspi->Instance->DR; - } - /* Receive data in 16 Bit mode */ - else - { - *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR; - hspi->pRxBuffPtr+=2; - } - hspi->RxXferCount--; - - /* Enable CRC Transmission */ - if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - /* Set CRC Next to calculate CRC on Rx side */ - hspi->Instance->CR1 |= SPI_CR1_CRCNEXT; - } - - if(hspi->RxXferCount == 0) - { - SPI_RxCloseIRQHandler(hspi); - } -} - -/** - * @brief DMA SPI transmit process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - /* DMA Normal Mode */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) - { - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - /* Disable Tx DMA Request */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN); - - /* Wait until Busy flag is reset before disabling SPI */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - hspi->TxXferCount = 0; - - hspi->State = HAL_SPI_STATE_READY; - } - - /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */ - if(hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - /* Check if Errors has been detected during transfer */ - if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - HAL_SPI_ErrorCallback(hspi); - } - else - { - HAL_SPI_TxCpltCallback(hspi); - } -} - -/** - * @brief DMA SPI receive process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - __IO uint16_t tmpreg; - - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* DMA Normal mode */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) - { - if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER)) - { - SPI_DMAEndTransmitReceive(hspi); - } - /* SPI_DIRECTION_1LINE or SPI_DIRECTION_2LINES_RXONLY */ - else - { - if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Disable Rx DMA Request */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN); - - hspi->RxXferCount = 0; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until RXNE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Read CRC */ - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); - - /* Wait until RXNE flag is set */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Check if CRC error occurred */ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } - } - } - - hspi->State = HAL_SPI_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - HAL_SPI_ErrorCallback(hspi); - } - else - { - HAL_SPI_RxCpltCallback(hspi); - } - } - else - { - HAL_SPI_RxCpltCallback(hspi); - } -} - -/** - * @brief End DMA SPI transmit receive process - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi) -{ - __IO uint16_t tmpreg; - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Check if CRC is done on going (RXNE flag set) */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) == HAL_OK) - { - /* Wait until RXNE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - } - /* Read CRC */ - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); - - /* Check if CRC error occurred */ - if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->ErrorCode |= HAL_SPI_ERROR_CRC; - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } - } - - /* Wait until TXE flag is set to send data */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - /* Disable Tx DMA Request */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN); - - /* Wait until Busy flag is reset before disabling SPI */ - if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK) - { - hspi->ErrorCode |= HAL_SPI_ERROR_FLAG; - } - - /* Disable Rx DMA Request */ - hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN); - - hspi->TxXferCount = 0; - hspi->RxXferCount = 0; -} - -/** - * @brief DMA SPI transmit receive process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0) - { /**/ - SPI_DMAEndTransmitReceive(hspi); - - hspi->State = HAL_SPI_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - HAL_SPI_ErrorCallback(hspi); - } - else - { - HAL_SPI_TxRxCpltCallback(hspi); - } - } - else - { - HAL_SPI_TxRxCpltCallback(hspi); - } -} - -/** - * @brief DMA SPI half transmit process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - HAL_SPI_TxHalfCpltCallback(hspi); -} - -/** - * @brief DMA SPI half receive process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - HAL_SPI_RxHalfCpltCallback(hspi); -} - -/** - * @brief DMA SPI Half transmit receive process complete callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - HAL_SPI_TxRxHalfCpltCallback(hspi); -} - -/** - * @brief DMA SPI communication error callback - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAError(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - hspi->TxXferCount = 0; - hspi->RxXferCount = 0; - hspi->State= HAL_SPI_STATE_READY; - hspi->ErrorCode |= HAL_SPI_ERROR_DMA; - HAL_SPI_ErrorCallback(hspi); -} - -/** - * @brief This function handles SPI Communication Timeout. - * @param hspi: pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Flag: SPI flag to check - * @param Status: Flag status to check: RESET or set - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - if(Status == RESET) - { - while(__HAL_SPI_GET_FLAG(hspi, Flag) == RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable the SPI and reset the CRC: the CRC value should be cleared - on both master and slave sides in order to resynchronize the master - and slave for their respective CRC calculation */ - - /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - hspi->State= HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_TIMEOUT; - } - } - } - } - else - { - while(__HAL_SPI_GET_FLAG(hspi, Flag) != RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable the SPI and reset the CRC: the CRC value should be cleared - on both master and slave sides in order to resynchronize the master - and slave for their respective CRC calculation */ - - /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Reset CRC Calculation */ - if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - hspi->State= HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - - -/** - * @} - */ - -#endif /* HAL_SPI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3