From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c | 3488 -------------------- 1 file changed, 3488 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c deleted file mode 100644 index d579fe8..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c +++ /dev/null @@ -1,3488 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sd.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief SD card HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Secure Digital (SD) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - This driver implements a high level communication layer for read and write from/to - this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by - the user in HAL_SD_MspInit() function (MSP layer). - Basically, the MSP layer configuration should be the same as we provide in the - examples. - You can easily tailor this configuration according to hardware resources. - - [..] - This driver is a generic layered driver for SDIO memories which uses the HAL - SDIO driver functions to interface with SD and uSD cards devices. - It is used as follows: - - (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API: - (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE(); - (##) SDIO pins configuration for SD card - (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init() - and according to your pin assignment; - (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA() - and HAL_SD_WriteBlocks_DMA() APIs). - (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE(); - (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled. - (##) NVIC configuration if you need to use interrupt process when using DMA transfer. - (+++) Configure the SDIO and DMA interrupt priorities using functions - HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority - (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ() - (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT() - and __HAL_SD_SDIO_DISABLE_IT() inside the communication process. - (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT() - and __HAL_SD_SDIO_CLEAR_IT() - (#) At this stage, you can perform SD read/write/erase operations after SD card initialization - - - *** SD Card Initialization and configuration *** - ================================================ - [..] - To initialize the SD Card, use the HAL_SD_Init() function. It Initializes - the SD Card and put it into Standby State (Ready for data transfer). - This function provide the following operations: - - (#) Apply the SD Card initialization process at 400KHz and check the SD Card - type (Standard Capacity or High Capacity). You can change or adapt this - frequency by adjusting the "ClockDiv" field. - The SD Card frequency (SDIO_CK) is computed as follows: - - SDIO_CK = SDIOCLK / (ClockDiv + 2) - - In initialization mode and according to the SD Card standard, - make sure that the SDIO_CK frequency doesn't exceed 400KHz. - - (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo - structure. This structure provide also ready computed SD Card capacity - and Block size. - - -@- These information are stored in SD handle structure in case of future use. - - (#) Configure the SD Card Data transfer frequency. By Default, the card transfer - frequency is set to 24MHz. You can change or adapt this frequency by adjusting - the "ClockDiv" field. - In transfer mode and according to the SD Card standard, make sure that the - SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch. - To be able to use a frequency higher than 24MHz, you should use the SDIO - peripheral in bypass mode. Refer to the corresponding reference manual - for more details. - - (#) Select the corresponding SD Card according to the address read with the step 2. - - (#) Configure the SD Card in wide bus mode: 4-bits data. - - *** SD Card Read operation *** - ============================== - [..] - (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). - This function support only 512-bytes block length (the block size should be - chosen as 512 bytes). - You can choose either one block read operation or multiple block read operation - by adjusting the "NumberOfBlocks" parameter. - - (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA(). - This function support only 512-bytes block length (the block size should be - chosen as 512 bytes). - You can choose either one block read operation or multiple block read operation - by adjusting the "NumberOfBlocks" parameter. - After this, you have to call the function HAL_SD_CheckReadOperation(), to insure - that the read transfer is done correctly in both DMA and SD sides. - - *** SD Card Write operation *** - =============================== - [..] - (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). - This function support only 512-bytes block length (the block size should be - chosen as 512 bytes). - You can choose either one block read operation or multiple block read operation - by adjusting the "NumberOfBlocks" parameter. - - (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA(). - This function support only 512-bytes block length (the block size should be - chosen as 512 byte). - You can choose either one block read operation or multiple block read operation - by adjusting the "NumberOfBlocks" parameter. - After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure - that the write transfer is done correctly in both DMA and SD sides. - - *** SD card status *** - ====================== - [..] - (+) At any time, you can check the SD Card status and get the SD card state - by using the HAL_SD_GetStatus() function. This function checks first if the - SD card is still connected and then get the internal SD Card transfer state. - (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus() - function. - - *** SD HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in SD HAL driver. - - (+) __HAL_SD_SDIO_ENABLE : Enable the SD device - (+) __HAL_SD_SDIO_DISABLE : Disable the SD device - (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer - (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer - (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt - (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt - (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not - (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags - - (@) You can refer to the SD HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -#ifdef HAL_SD_MODULE_ENABLED - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SD - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup SD_Private_Defines - * @{ - */ -/** - * @brief SDIO Data block size - */ -#define DATA_BLOCK_SIZE ((uint32_t)(9 << 4)) -/** - * @brief SDIO Static flags, Timeout, FIFO Address - */ -#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ - SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ - SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ - SDIO_FLAG_DBCKEND)) - -#define SDIO_CMD0TIMEOUT ((uint32_t)0x00010000) - -/** - * @brief Mask for errors Card Status R1 (OCR Register) - */ -#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000) -#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000) -#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000) -#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000) -#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000) -#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000) -#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000) -#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000) -#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000) -#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000) -#define SD_OCR_CC_ERROR ((uint32_t)0x00100000) -#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000) -#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000) -#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000) -#define SD_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000) -#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000) -#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000) -#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000) -#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008) -#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008) - -/** - * @brief Masks for R6 Response - */ -#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000) -#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000) -#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000) - -#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000) -#define SD_HIGH_CAPACITY ((uint32_t)0x40000000) -#define SD_STD_CAPACITY ((uint32_t)0x00000000) -#define SD_CHECK_PATTERN ((uint32_t)0x000001AA) - -#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFF) -#define SD_ALLZERO ((uint32_t)0x00000000) - -#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000) -#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000) -#define SD_CARD_LOCKED ((uint32_t)0x02000000) - -#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFF) -#define SD_0TO7BITS ((uint32_t)0x000000FF) -#define SD_8TO15BITS ((uint32_t)0x0000FF00) -#define SD_16TO23BITS ((uint32_t)0x00FF0000) -#define SD_24TO31BITS ((uint32_t)0xFF000000) -#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFF) - -#define SD_HALFFIFO ((uint32_t)0x00000008) -#define SD_HALFFIFOBYTES ((uint32_t)0x00000020) - -/** - * @brief Command Class Supported - */ -#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080) -#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040) -#define SD_CCCC_ERASE ((uint32_t)0x00000020) - -/** - * @brief Following commands are SD Card Specific commands. - * SDIO_APP_CMD should be sent before sending these commands. - */ -#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD) - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup SD_Private_Functions_Prototypes - * @{ - */ -static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr); -static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus); -static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus); -static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD); -static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA); -static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd); -static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR); -static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma); -static void SD_DMA_RxError(DMA_HandleTypeDef *hdma); -static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma); -static void SD_DMA_TxError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SD_Exported_Functions - * @{ - */ - -/** @addtogroup SD_Exported_Functions_Group1 - * @brief Initialization and de-initialization functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to initialize/de-initialize the SD - card device to be ready for use. - - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the SD card according to the specified parameters in the - SD_HandleTypeDef and create the associated handle. - * @param hsd: SD handle - * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information - * @retval HAL SD error state - */ -HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo) -{ - __IO HAL_SD_ErrorTypedef errorstate = SD_OK; - SD_InitTypeDef tmpinit; - - /* Allocate lock resource and initialize it */ - hsd->Lock = HAL_UNLOCKED; - /* Initialize the low level hardware (MSP) */ - HAL_SD_MspInit(hsd); - - /* Default SDIO peripheral configuration for SD card initialization */ - tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING; - tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE; - tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE; - tmpinit.BusWide = SDIO_BUS_WIDE_1B; - tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE; - tmpinit.ClockDiv = SDIO_INIT_CLK_DIV; - - /* Initialize SDIO peripheral interface with default configuration */ - SDIO_Init(hsd->Instance, tmpinit); - - /* Identify card operating voltage */ - errorstate = SD_PowerON(hsd); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Initialize the present SDIO card(s) and put them in idle state */ - errorstate = SD_Initialize_Cards(hsd); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Read CSD/CID MSD registers */ - errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo); - - if (errorstate == SD_OK) - { - /* Select the Card */ - errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16)); - } - - /* Configure SDIO peripheral interface */ - SDIO_Init(hsd->Instance, hsd->Init); - - return errorstate; -} - -/** - * @brief De-Initializes the SD card. - * @param hsd: SD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd) -{ - - /* Set SD power state to off */ - SD_PowerOFF(hsd); - - /* De-Initialize the MSP layer */ - HAL_SD_MspDeInit(hsd); - - return HAL_OK; -} - - -/** - * @brief Initializes the SD MSP. - * @param hsd: SD handle - * @retval None - */ -__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_MspInit could be implemented in the user file - */ -} - -/** - * @brief De-Initialize SD MSP. - * @param hsd: SD handle - * @retval None - */ -__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @addtogroup SD_Exported_Functions_Group2 - * @brief Data transfer functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the data - transfer from/to SD card. - -@endverbatim - * @{ - */ - -/** - * @brief Reads block(s) from a specified address in a card. The Data transfer - * is managed by polling mode. - * @param hsd: SD handle - * @param pReadBuffer: pointer to the buffer that will contain the received data - * @param ReadAddr: Address from where data is to be read - * @param BlockSize: SD card Data block size - * @note BlockSize must be 512 bytes. - * @param NumberOfBlocks: Number of SD blocks to read - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer; - - /* Initialize data control register */ - hsd->Instance->DCTRL = 0; - - if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - ReadAddr /= 512; - } - - /* Set Block Size for Card */ - sdio_cmdinitstructure.Argument = (uint32_t) BlockSize; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize; - sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - if(NumberOfBlocks > 1) - { - /* Send CMD18 READ_MULT_BLOCK with argument data address */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK; - } - else - { - /* Send CMD17 READ_SINGLE_BLOCK */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK; - } - - sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Read block(s) in polling mode */ - if(NumberOfBlocks > 1) - { - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Poll on SDIO flags */ -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) - { - /* Read data from SDIO Rx FIFO */ - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); - } - - tempbuff += 8; - } - } - } - else - { - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* In case of single block transfer, no need of stop transfer at all */ -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) - { - /* Read data from SDIO Rx FIFO */ - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); - } - - tempbuff += 8; - } - } - } - - /* Send stop transmission command in case of multiblock read */ - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1)) - { - if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\ - (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ - (hsd->CardType == HIGH_CAPACITY_SD_CARD)) - { - /* Send stop transmission command */ - errorstate = HAL_SD_StopTransfer(hsd); - } - } - - /* Get error state */ - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - errorstate = SD_DATA_TIMEOUT; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - errorstate = SD_DATA_CRC_FAIL; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); - - errorstate = SD_RX_OVERRUN; - - return errorstate; - } -#ifdef SDIO_STA_STBITERR - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - errorstate = SD_START_BIT_ERR; - - return errorstate; - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - count = SD_DATATIMEOUT; - - /* Empty FIFO if there is still any data */ - while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) - { - *tempbuff = SDIO_ReadFIFO(hsd->Instance); - tempbuff++; - count--; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - return errorstate; -} - -/** - * @brief Allows to write block(s) to a specified address in a card. The Data - * transfer is managed by polling mode. - * @param hsd: SD handle - * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit - * @param WriteAddr: Address from where data is to be written - * @param BlockSize: SD card Data block size - * @note BlockSize must be 512 bytes. - * @param NumberOfBlocks: Number of SD blocks to write - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0; - uint32_t *tempbuff = (uint32_t *)pWriteBuffer; - uint8_t cardstate = 0; - - /* Initialize data control register */ - hsd->Instance->DCTRL = 0; - - if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - WriteAddr /= 512; - } - - /* Set Block Size for Card */ - sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - if(NumberOfBlocks > 1) - { - /* Send CMD25 WRITE_MULT_BLOCK with argument data address */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK; - } - else - { - /* Send CMD24 WRITE_SINGLE_BLOCK */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK; - } - - sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - if(NumberOfBlocks > 1) - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK); - } - else - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK); - } - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Set total number of bytes to write */ - totalnumberofbytes = NumberOfBlocks * BlockSize; - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - /* Write block(s) in polling mode */ - if(NumberOfBlocks > 1) - { -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE)) - { - if ((totalnumberofbytes - bytestransferred) < 32) - { - restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1); - - /* Write data to SDIO Tx FIFO */ - for (count = 0; count < restwords; count++) - { - SDIO_WriteFIFO(hsd->Instance, tempbuff); - tempbuff++; - bytestransferred += 4; - } - } - else - { - /* Write data to SDIO Tx FIFO */ - for (count = 0; count < 8; count++) - { - SDIO_WriteFIFO(hsd->Instance, (tempbuff + count)); - } - - tempbuff += 8; - bytestransferred += 32; - } - } - } - } - else - { - /* In case of single data block transfer no need of stop command at all */ -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE)) - { - if ((totalnumberofbytes - bytestransferred) < 32) - { - restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1); - - /* Write data to SDIO Tx FIFO */ - for (count = 0; count < restwords; count++) - { - SDIO_WriteFIFO(hsd->Instance, tempbuff); - tempbuff++; - bytestransferred += 4; - } - } - else - { - /* Write data to SDIO Tx FIFO */ - for (count = 0; count < 8; count++) - { - SDIO_WriteFIFO(hsd->Instance, (tempbuff + count)); - } - - tempbuff += 8; - bytestransferred += 32; - } - } - } - } - - /* Send stop transmission command in case of multiblock write */ - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1)) - { - if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ - (hsd->CardType == HIGH_CAPACITY_SD_CARD)) - { - /* Send stop transmission command */ - errorstate = HAL_SD_StopTransfer(hsd); - } - } - - /* Get error state */ - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - errorstate = SD_DATA_TIMEOUT; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - errorstate = SD_DATA_CRC_FAIL; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR); - - errorstate = SD_TX_UNDERRUN; - - return errorstate; - } -#ifdef SDIO_STA_STBITERR - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - errorstate = SD_START_BIT_ERR; - - return errorstate; - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* Wait till the card is in programming state */ - errorstate = SD_IsCardProgramming(hsd, &cardstate); - - while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) - { - errorstate = SD_IsCardProgramming(hsd, &cardstate); - } - - return errorstate; -} - -/** - * @brief Reads block(s) from a specified address in a card. The Data transfer - * is managed by DMA mode. - * @note This API should be followed by the function HAL_SD_CheckReadOperation() - * to check the completion of the read process - * @param hsd: SD handle - * @param pReadBuffer: Pointer to the buffer that will contain the received data - * @param ReadAddr: Address from where data is to be read - * @param BlockSize: SD card Data block size - * @note BlockSize must be 512 bytes. - * @param NumberOfBlocks: Number of blocks to read. - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - /* Initialize data control register */ - hsd->Instance->DCTRL = 0; - - /* Initialize handle flags */ - hsd->SdTransferCplt = 0; - hsd->DmaTransferCplt = 0; - hsd->SdTransferErr = SD_OK; - - /* Initialize SD Read operation */ - if(NumberOfBlocks > 1) - { - hsd->SdOperation = SD_READ_MULTIPLE_BLOCK; - } - else - { - hsd->SdOperation = SD_READ_SINGLE_BLOCK; - } - - /* Enable transfer interrupts */ -#ifdef SDIO_STA_STBITERR - __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ - SDIO_IT_DTIMEOUT |\ - SDIO_IT_DATAEND |\ - SDIO_IT_RXOVERR |\ - SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ - __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ - SDIO_IT_DTIMEOUT |\ - SDIO_IT_DATAEND |\ - SDIO_IT_RXOVERR)); -#endif /* SDIO_STA_STBITERR */ - - /* Enable SDIO DMA transfer */ - __HAL_SD_SDIO_DMA_ENABLE(); - - /* Configure DMA user callbacks */ - hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt; - hsd->hdmarx->XferErrorCallback = SD_DMA_RxError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4); - - if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - ReadAddr /= 512; - } - - /* Set Block Size for Card */ - sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - /* Check number of blocks command */ - if(NumberOfBlocks > 1) - { - /* Send CMD18 READ_MULT_BLOCK with argument data address */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK; - } - else - { - /* Send CMD17 READ_SINGLE_BLOCK */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK; - } - - sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - if(NumberOfBlocks > 1) - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK); - } - else - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK); - } - - /* Update the SD transfer error in SD handle */ - hsd->SdTransferErr = errorstate; - - return errorstate; -} - - -/** - * @brief Writes block(s) to a specified address in a card. The Data transfer - * is managed by DMA mode. - * @note This API should be followed by the function HAL_SD_CheckWriteOperation() - * to check the completion of the write process (by SD current status polling). - * @param hsd: SD handle - * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit - * @param WriteAddr: Address from where data is to be read - * @param BlockSize: the SD card Data block size - * @note BlockSize must be 512 bytes. - * @param NumberOfBlocks: Number of blocks to write - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - /* Initialize data control register */ - hsd->Instance->DCTRL = 0; - - /* Initialize handle flags */ - hsd->SdTransferCplt = 0; - hsd->DmaTransferCplt = 0; - hsd->SdTransferErr = SD_OK; - - /* Initialize SD Write operation */ - if(NumberOfBlocks > 1) - { - hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK; - } - else - { - hsd->SdOperation = SD_WRITE_SINGLE_BLOCK; - } - - /* Enable transfer interrupts */ -#ifdef SDIO_STA_STBITERR - __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ - SDIO_IT_DTIMEOUT |\ - SDIO_IT_DATAEND |\ - SDIO_IT_TXUNDERR |\ - SDIO_IT_STBITERR)); -#else /* SDIO_STA_STBITERR not defined */ - __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\ - SDIO_IT_DTIMEOUT |\ - SDIO_IT_DATAEND |\ - SDIO_IT_TXUNDERR)); -#endif /* SDIO_STA_STBITERR */ - - /* Configure DMA user callbacks */ - hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt; - hsd->hdmatx->XferErrorCallback = SD_DMA_TxError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4); - - /* Enable SDIO DMA transfer */ - __HAL_SD_SDIO_DMA_ENABLE(); - - if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - WriteAddr /= 512; - } - - /* Set Block Size for Card */ - sdio_cmdinitstructure.Argument = (uint32_t)BlockSize; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Check number of blocks command */ - if(NumberOfBlocks <= 1) - { - /* Send CMD24 WRITE_SINGLE_BLOCK */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK; - } - else - { - /* Send CMD25 WRITE_MULT_BLOCK with argument data address */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK; - } - - sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - if(NumberOfBlocks > 1) - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK); - } - else - { - errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK); - } - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - hsd->SdTransferErr = errorstate; - - return errorstate; -} - -/** - * @brief This function waits until the SD DMA data read transfer is finished. - * This API should be called after HAL_SD_ReadBlocks_DMA() function - * to insure that all data sent by the card is already transferred by the - * DMA controller. - * @param hsd: SD handle - * @param Timeout: Timeout duration - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t timeout = Timeout; - uint32_t tmp1, tmp2; - HAL_SD_ErrorTypedef tmp3; - - /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */ - tmp1 = hsd->DmaTransferCplt; - tmp2 = hsd->SdTransferCplt; - tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; - - while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0)) - { - tmp1 = hsd->DmaTransferCplt; - tmp2 = hsd->SdTransferCplt; - tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; - timeout--; - } - - timeout = Timeout; - - /* Wait until the Rx transfer is no longer active */ - while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0)) - { - timeout--; - } - - /* Send stop command in multiblock read */ - if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK) - { - errorstate = HAL_SD_StopTransfer(hsd); - } - - if ((timeout == 0) && (errorstate == SD_OK)) - { - errorstate = SD_DATA_TIMEOUT; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* Return error state */ - if (hsd->SdTransferErr != SD_OK) - { - return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr); - } - - return errorstate; -} - -/** - * @brief This function waits until the SD DMA data write transfer is finished. - * This API should be called after HAL_SD_WriteBlocks_DMA() function - * to insure that all data sent by the card is already transferred by the - * DMA controller. - * @param hsd: SD handle - * @param Timeout: Timeout duration - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t timeout = Timeout; - uint32_t tmp1, tmp2; - HAL_SD_ErrorTypedef tmp3; - - /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */ - tmp1 = hsd->DmaTransferCplt; - tmp2 = hsd->SdTransferCplt; - tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; - - while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0)) - { - tmp1 = hsd->DmaTransferCplt; - tmp2 = hsd->SdTransferCplt; - tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr; - timeout--; - } - - timeout = Timeout; - - /* Wait until the Tx transfer is no longer active */ - while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0)) - { - timeout--; - } - - /* Send stop command in multiblock write */ - if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK) - { - errorstate = HAL_SD_StopTransfer(hsd); - } - - if ((timeout == 0) && (errorstate == SD_OK)) - { - errorstate = SD_DATA_TIMEOUT; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* Return error state */ - if (hsd->SdTransferErr != SD_OK) - { - return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr); - } - - /* Wait until write is complete */ - while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK) - { - } - - return errorstate; -} - -/** - * @brief Erases the specified memory area of the given SD card. - * @param hsd: SD handle - * @param startaddr: Start byte address - * @param endaddr: End byte address - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - - uint32_t delay = 0; - __IO uint32_t maxdelay = 0; - uint8_t cardstate = 0; - - /* Check if the card command class supports erase command */ - if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0) - { - errorstate = SD_REQUEST_NOT_APPLICABLE; - - return errorstate; - } - - /* Get max delay value */ - maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2); - - if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) - { - errorstate = SD_LOCK_UNLOCK_FAILED; - - return errorstate; - } - - /* Get start and end block for high capacity cards */ - if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - startaddr /= 512; - endaddr /= 512; - } - - /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ - if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ - (hsd->CardType == HIGH_CAPACITY_SD_CARD)) - { - /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ - sdio_cmdinitstructure.Argument =(uint32_t)startaddr; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ - sdio_cmdinitstructure.Argument = (uint32_t)endaddr; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END); - - if (errorstate != SD_OK) - { - return errorstate; - } - } - - /* Send CMD38 ERASE */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE); - - if (errorstate != SD_OK) - { - return errorstate; - } - - for (; delay < maxdelay; delay++) - { - } - - /* Wait until the card is in programming state */ - errorstate = SD_IsCardProgramming(hsd, &cardstate); - - delay = SD_DATATIMEOUT; - - while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) - { - errorstate = SD_IsCardProgramming(hsd, &cardstate); - delay--; - } - - return errorstate; -} - -/** - * @brief This function handles SD card interrupt request. - * @param hsd: SD handle - * @retval None - */ -void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) -{ - /* Check for SDIO interrupt flags */ - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND); - - /* SD transfer is complete */ - hsd->SdTransferCplt = 1; - - /* No transfer error */ - hsd->SdTransferErr = SD_OK; - - HAL_SD_XferCpltCallback(hsd); - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - hsd->SdTransferErr = SD_DATA_CRC_FAIL; - - HAL_SD_XferErrorCallback(hsd); - - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - hsd->SdTransferErr = SD_DATA_TIMEOUT; - - HAL_SD_XferErrorCallback(hsd); - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); - - hsd->SdTransferErr = SD_RX_OVERRUN; - - HAL_SD_XferErrorCallback(hsd); - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR); - - hsd->SdTransferErr = SD_TX_UNDERRUN; - - HAL_SD_XferErrorCallback(hsd); - } -#ifdef SDIO_STA_STBITERR - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - hsd->SdTransferErr = SD_START_BIT_ERR; - - HAL_SD_XferErrorCallback(hsd); - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - /* Disable all SDIO peripheral interrupt sources */ -#ifdef SDIO_STA_STBITERR - __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\ - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\ - SDIO_IT_RXOVERR | SDIO_IT_STBITERR); -#else /* SDIO_STA_STBITERR not defined */ - __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\ - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\ - SDIO_IT_RXOVERR); -#endif /* SDIO_STA_STBITERR */ -} - - -/** - * @brief SD end of transfer callback. - * @param hsd: SD handle - * @retval None - */ -__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_XferCpltCallback could be implemented in the user file - */ -} - -/** - * @brief SD Transfer Error callback. - * @param hsd: SD handle - * @retval None - */ -__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_XferErrorCallback could be implemented in the user file - */ -} - -/** - * @brief SD Transfer complete Rx callback in non blocking mode. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_DMA_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief SD DMA transfer complete Rx error callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_DMA_RxErrorCallback could be implemented in the user file - */ -} - -/** - * @brief SD Transfer complete Tx callback in non blocking mode. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_DMA_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief SD DMA transfer complete error Tx callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SD_DMA_TxErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @addtogroup SD_Exported_Functions_Group3 - * @brief management functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the SD card - operations. - -@endverbatim - * @{ - */ - -/** - * @brief Returns information about specific card. - * @param hsd: SD handle - * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that - * contains all SD cardinformation - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t tmp = 0; - - pCardInfo->CardType = (uint8_t)(hsd->CardType); - pCardInfo->RCA = (uint16_t)(hsd->RCA); - - /* Byte 0 */ - tmp = (hsd->CSD[0] & 0xFF000000) >> 24; - pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0) >> 6); - pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2); - pCardInfo->SD_csd.Reserved1 = tmp & 0x03; - - /* Byte 1 */ - tmp = (hsd->CSD[0] & 0x00FF0000) >> 16; - pCardInfo->SD_csd.TAAC = (uint8_t)tmp; - - /* Byte 2 */ - tmp = (hsd->CSD[0] & 0x0000FF00) >> 8; - pCardInfo->SD_csd.NSAC = (uint8_t)tmp; - - /* Byte 3 */ - tmp = hsd->CSD[0] & 0x000000FF; - pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp; - - /* Byte 4 */ - tmp = (hsd->CSD[1] & 0xFF000000) >> 24; - pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4); - - /* Byte 5 */ - tmp = (hsd->CSD[1] & 0x00FF0000) >> 16; - pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4); - pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0F); - - /* Byte 6 */ - tmp = (hsd->CSD[1] & 0x0000FF00) >> 8; - pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80) >> 7); - pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6); - pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5); - pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10) >> 4); - pCardInfo->SD_csd.Reserved2 = 0; /*!< Reserved */ - - if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0)) - { - pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10; - - /* Byte 7 */ - tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF); - pCardInfo->SD_csd.DeviceSize |= (tmp) << 2; - - /* Byte 8 */ - tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24); - pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6; - - pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3; - pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07); - - /* Byte 9 */ - tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16); - pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5; - pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2; - pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1; - /* Byte 10 */ - tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8); - pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7; - - pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1) ; - pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2)); - pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen); - pCardInfo->CardCapacity *= pCardInfo->CardBlockSize; - } - else if (hsd->CardType == HIGH_CAPACITY_SD_CARD) - { - /* Byte 7 */ - tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF); - pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16; - - /* Byte 8 */ - tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24); - - pCardInfo->SD_csd.DeviceSize |= (tmp << 8); - - /* Byte 9 */ - tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16); - - pCardInfo->SD_csd.DeviceSize |= (tmp); - - /* Byte 10 */ - tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8); - - pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1)) * 512 * 1024); - pCardInfo->CardBlockSize = 512; - } - else - { - /* Not supported card type */ - errorstate = SD_ERROR; - } - - pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6; - pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1; - - /* Byte 11 */ - tmp = (uint8_t)(hsd->CSD[2] & 0x000000FF); - pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7; - pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F); - - /* Byte 12 */ - tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000) >> 24); - pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7; - pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5; - pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2; - pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2; - - /* Byte 13 */ - tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000) >> 16); - pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6; - pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5; - pCardInfo->SD_csd.Reserved3 = 0; - pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01); - - /* Byte 14 */ - tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00) >> 8); - pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7; - pCardInfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6; - pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5; - pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4; - pCardInfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2; - pCardInfo->SD_csd.ECC = (tmp & 0x03); - - /* Byte 15 */ - tmp = (uint8_t)(hsd->CSD[3] & 0x000000FF); - pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1; - pCardInfo->SD_csd.Reserved4 = 1; - - /* Byte 0 */ - tmp = (uint8_t)((hsd->CID[0] & 0xFF000000) >> 24); - pCardInfo->SD_cid.ManufacturerID = tmp; - - /* Byte 1 */ - tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000) >> 16); - pCardInfo->SD_cid.OEM_AppliID = tmp << 8; - - /* Byte 2 */ - tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00) >> 8); - pCardInfo->SD_cid.OEM_AppliID |= tmp; - - /* Byte 3 */ - tmp = (uint8_t)(hsd->CID[0] & 0x000000FF); - pCardInfo->SD_cid.ProdName1 = tmp << 24; - - /* Byte 4 */ - tmp = (uint8_t)((hsd->CID[1] & 0xFF000000) >> 24); - pCardInfo->SD_cid.ProdName1 |= tmp << 16; - - /* Byte 5 */ - tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000) >> 16); - pCardInfo->SD_cid.ProdName1 |= tmp << 8; - - /* Byte 6 */ - tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00) >> 8); - pCardInfo->SD_cid.ProdName1 |= tmp; - - /* Byte 7 */ - tmp = (uint8_t)(hsd->CID[1] & 0x000000FF); - pCardInfo->SD_cid.ProdName2 = tmp; - - /* Byte 8 */ - tmp = (uint8_t)((hsd->CID[2] & 0xFF000000) >> 24); - pCardInfo->SD_cid.ProdRev = tmp; - - /* Byte 9 */ - tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000) >> 16); - pCardInfo->SD_cid.ProdSN = tmp << 24; - - /* Byte 10 */ - tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00) >> 8); - pCardInfo->SD_cid.ProdSN |= tmp << 16; - - /* Byte 11 */ - tmp = (uint8_t)(hsd->CID[2] & 0x000000FF); - pCardInfo->SD_cid.ProdSN |= tmp << 8; - - /* Byte 12 */ - tmp = (uint8_t)((hsd->CID[3] & 0xFF000000) >> 24); - pCardInfo->SD_cid.ProdSN |= tmp; - - /* Byte 13 */ - tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000) >> 16); - pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4; - pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8; - - /* Byte 14 */ - tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00) >> 8); - pCardInfo->SD_cid.ManufactDate |= tmp; - - /* Byte 15 */ - tmp = (uint8_t)(hsd->CID[3] & 0x000000FF); - pCardInfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1; - pCardInfo->SD_cid.Reserved2 = 1; - - return errorstate; -} - -/** - * @brief Enables wide bus operation for the requested card if supported by - * card. - * @param hsd: SD handle - * @param WideMode: Specifies the SD card wide bus mode - * This parameter can be one of the following values: - * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC) - * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer - * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - SDIO_InitTypeDef tmpinit; - - /* MMC Card does not support this feature */ - if (hsd->CardType == MULTIMEDIA_CARD) - { - errorstate = SD_UNSUPPORTED_FEATURE; - - return errorstate; - } - else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ - (hsd->CardType == HIGH_CAPACITY_SD_CARD)) - { - if (WideMode == SDIO_BUS_WIDE_8B) - { - errorstate = SD_UNSUPPORTED_FEATURE; - } - else if (WideMode == SDIO_BUS_WIDE_4B) - { - errorstate = SD_WideBus_Enable(hsd); - } - else if (WideMode == SDIO_BUS_WIDE_1B) - { - errorstate = SD_WideBus_Disable(hsd); - } - else - { - /* WideMode is not a valid argument*/ - errorstate = SD_INVALID_PARAMETER; - } - - if (errorstate == SD_OK) - { - /* Configure the SDIO peripheral */ - tmpinit.ClockEdge = hsd->Init.ClockEdge; - tmpinit.ClockBypass = hsd->Init.ClockBypass; - tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave; - tmpinit.BusWide = WideMode; - tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl; - tmpinit.ClockDiv = hsd->Init.ClockDiv; - SDIO_Init(hsd->Instance, tmpinit); - } - } - - return errorstate; -} - -/** - * @brief Aborts an ongoing data transfer. - * @param hsd: SD handle - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - /* Send CMD12 STOP_TRANSMISSION */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION); - - return errorstate; -} - -/** - * @brief Switches the SD card to High Speed mode. - * This API must be used after "Transfer State" - * @note This operation should be followed by the configuration - * of PLL to have SDIOCK clock between 67 and 75 MHz - * @param hsd: SD handle - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - - uint8_t SD_hs[64] = {0}; - uint32_t SD_scr[2] = {0, 0}; - uint32_t SD_SPEC = 0 ; - uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs; - - /* Initialize the Data control register */ - hsd->Instance->DCTRL = 0; - - /* Get SCR Register */ - errorstate = SD_FindSCR(hsd, SD_scr); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Test the Version supported by the card*/ - SD_SPEC = (SD_scr[1] & 0x01000000) | (SD_scr[1] & 0x02000000); - - if (SD_SPEC != SD_ALLZERO) - { - /* Set Block Size for Card */ - sdio_cmdinitstructure.Argument = (uint32_t)64; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = 64; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - /* Send CMD6 switch mode */ - sdio_cmdinitstructure.Argument = 0x80FFFF01; - sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH); - - if (errorstate != SD_OK) - { - return errorstate; - } -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) - { - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); - } - - tempbuff += 8; - } - } - - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - errorstate = SD_DATA_TIMEOUT; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - errorstate = SD_DATA_CRC_FAIL; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); - - errorstate = SD_RX_OVERRUN; - - return errorstate; - } -#ifdef SDIO_STA_STBITERR - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - errorstate = SD_START_BIT_ERR; - - return errorstate; - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - count = SD_DATATIMEOUT; - - while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) - { - *tempbuff = SDIO_ReadFIFO(hsd->Instance); - tempbuff++; - count--; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* Test if the switch mode HS is ok */ - if ((SD_hs[13]& 2) != 2) - { - errorstate = SD_UNSUPPORTED_FEATURE; - } - } - - return errorstate; -} - -/** - * @} - */ - -/** @addtogroup SD_Exported_Functions_Group4 - * @brief Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in runtime the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the current SD card's status. - * @param hsd: SD handle - * @param pSDstatus: Pointer to the buffer that will contain the SD card status - * SD Status register) - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t count = 0; - - /* Check SD response */ - if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) - { - errorstate = SD_LOCK_UNLOCK_FAILED; - - return errorstate; - } - - /* Set block size for card if it is not equal to current block size for card */ - sdio_cmdinitstructure.Argument = 64; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Send CMD55 */ - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Configure the SD DPSM (Data Path State Machine) */ - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = 64; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Get status data */ -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) -#endif /* SDIO_STA_STBITERR */ - { - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) - { - for (count = 0; count < 8; count++) - { - *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance); - } - - pSDstatus += 8; - } - } - - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - errorstate = SD_DATA_TIMEOUT; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - errorstate = SD_DATA_CRC_FAIL; - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); - - errorstate = SD_RX_OVERRUN; - - return errorstate; - } -#ifdef SDIO_STA_STBITERR - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - errorstate = SD_START_BIT_ERR; - - return errorstate; - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - count = SD_DATATIMEOUT; - while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0)) - { - *pSDstatus = SDIO_ReadFIFO(hsd->Instance); - pSDstatus++; - count--; - } - - /* Clear all the static status flags*/ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - return errorstate; -} - -/** - * @brief Gets the current sd card data status. - * @param hsd: SD handle - * @retval Data Transfer state - */ -HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd) -{ - HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER; - - /* Get SD card state */ - cardstate = SD_GetState(hsd); - - /* Find SD status according to card state*/ - if (cardstate == SD_CARD_TRANSFER) - { - return SD_TRANSFER_OK; - } - else if(cardstate == SD_CARD_ERROR) - { - return SD_TRANSFER_ERROR; - } - else - { - return SD_TRANSFER_BUSY; - } -} - -/** - * @brief Gets the SD card status. - * @param hsd: SD handle - * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that - * will contain the SD card status information - * @retval SD Card error state - */ -HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t tmp = 0; - uint32_t sd_status[16]; - - errorstate = HAL_SD_SendSDStatus(hsd, sd_status); - - if (errorstate != SD_OK) - { - return errorstate; - } - - /* Byte 0 */ - tmp = (sd_status[0] & 0xC0) >> 6; - pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp; - - /* Byte 0 */ - tmp = (sd_status[0] & 0x20) >> 5; - pCardStatus->SECURED_MODE = (uint8_t)tmp; - - /* Byte 2 */ - tmp = (sd_status[2] & 0xFF); - pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8); - - /* Byte 3 */ - tmp = (sd_status[3] & 0xFF); - pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp; - - /* Byte 4 */ - tmp = (sd_status[4] & 0xFF); - pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24); - - /* Byte 5 */ - tmp = (sd_status[5] & 0xFF); - pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16); - - /* Byte 6 */ - tmp = (sd_status[6] & 0xFF); - pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8); - - /* Byte 7 */ - tmp = (sd_status[7] & 0xFF); - pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp; - - /* Byte 8 */ - tmp = (sd_status[8] & 0xFF); - pCardStatus->SPEED_CLASS = (uint8_t)tmp; - - /* Byte 9 */ - tmp = (sd_status[9] & 0xFF); - pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp; - - /* Byte 10 */ - tmp = (sd_status[10] & 0xF0) >> 4; - pCardStatus->AU_SIZE = (uint8_t)tmp; - - /* Byte 11 */ - tmp = (sd_status[11] & 0xFF); - pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8); - - /* Byte 12 */ - tmp = (sd_status[12] & 0xFF); - pCardStatus->ERASE_SIZE |= (uint8_t)tmp; - - /* Byte 13 */ - tmp = (sd_status[13] & 0xFC) >> 2; - pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp; - - /* Byte 13 */ - tmp = (sd_status[13] & 0x3); - pCardStatus->ERASE_OFFSET = (uint8_t)tmp; - - return errorstate; -} - -/** - * @} - */ - -/** - * @} - */ - -/* Private function ----------------------------------------------------------*/ -/** @addtogroup SD_Private_Functions - * @{ - */ - -/** - * @brief SD DMA transfer complete Rx callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma) -{ - SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* DMA transfer is complete */ - hsd->DmaTransferCplt = 1; - - /* Wait until SD transfer is complete */ - while(hsd->SdTransferCplt == 0) - { - } - - /* Disable the DMA channel */ - HAL_DMA_Abort(hdma); - - /* Transfer complete user callback */ - HAL_SD_DMA_RxCpltCallback(hsd->hdmarx); -} - -/** - * @brief SD DMA transfer Error Rx callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SD_DMA_RxError(DMA_HandleTypeDef *hdma) -{ - SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Transfer complete user callback */ - HAL_SD_DMA_RxErrorCallback(hsd->hdmarx); -} - -/** - * @brief SD DMA transfer complete Tx callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma) -{ - SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* DMA transfer is complete */ - hsd->DmaTransferCplt = 1; - - /* Wait until SD transfer is complete */ - while(hsd->SdTransferCplt == 0) - { - } - - /* Disable the DMA channel */ - HAL_DMA_Abort(hdma); - - /* Transfer complete user callback */ - HAL_SD_DMA_TxCpltCallback(hsd->hdmatx); -} - -/** - * @brief SD DMA transfer Error Tx callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SD_DMA_TxError(DMA_HandleTypeDef *hdma) -{ - SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - /* Transfer complete user callback */ - HAL_SD_DMA_TxErrorCallback(hsd->hdmatx); -} - -/** - * @brief Returns the SD current state. - * @param hsd: SD handle - * @retval SD card current state - */ -static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd) -{ - uint32_t resp1 = 0; - - if (SD_SendStatus(hsd, &resp1) != SD_OK) - { - return SD_CARD_ERROR; - } - else - { - return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F); - } -} - -/** - * @brief Initializes all cards or single card as the case may be Card(s) come - * into standby state. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint16_t sd_rca = 1; - - if(SDIO_GetPowerState(hsd->Instance) == 0) /* Power off */ - { - errorstate = SD_REQUEST_NOT_APPLICABLE; - - return errorstate; - } - - if(hsd->CardType != SECURE_DIGITAL_IO_CARD) - { - /* Send CMD2 ALL_SEND_CID */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp2Error(hsd); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Get Card identification number data */ - hsd->CID[0] = SDIO_GetResponse(SDIO_RESP1); - hsd->CID[1] = SDIO_GetResponse(SDIO_RESP2); - hsd->CID[2] = SDIO_GetResponse(SDIO_RESP3); - hsd->CID[3] = SDIO_GetResponse(SDIO_RESP4); - } - - if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\ - (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD)) - { - /* Send CMD3 SET_REL_ADDR with argument 0 */ - /* SD Card publishes its RCA. */ - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca); - - if(errorstate != SD_OK) - { - return errorstate; - } - } - - if (hsd->CardType != SECURE_DIGITAL_IO_CARD) - { - /* Get the SD card RCA */ - hsd->RCA = sd_rca; - - /* Send CMD9 SEND_CSD with argument as card's RCA */ - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp2Error(hsd); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Get Card Specific Data */ - hsd->CSD[0] = SDIO_GetResponse(SDIO_RESP1); - hsd->CSD[1] = SDIO_GetResponse(SDIO_RESP2); - hsd->CSD[2] = SDIO_GetResponse(SDIO_RESP3); - hsd->CSD[3] = SDIO_GetResponse(SDIO_RESP4); - } - - /* All cards are initialized */ - return errorstate; -} - -/** - * @brief Selects of Deselects the corresponding card. - * @param hsd: SD handle - * @param addr: Address of the card to be selected - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - /* Send CMD7 SDIO_SEL_DESEL_CARD */ - sdio_cmdinitstructure.Argument = (uint32_t)addr; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD); - - return errorstate; -} - -/** - * @brief Enquires cards about their operating voltage and configures clock - * controls and stores SD information that will be needed in future - * in the SD handle. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - __IO HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t response = 0, count = 0, validvoltage = 0; - uint32_t sdtype = SD_STD_CAPACITY; - - /* Power ON Sequence -------------------------------------------------------*/ - /* Disable SDIO Clock */ - __HAL_SD_SDIO_DISABLE(); - - /* Set Power State to ON */ - SDIO_PowerState_ON(hsd->Instance); - - /* 1ms: required power up waiting time before starting the SD initialization - sequence */ - HAL_Delay(1); - - /* Enable SDIO Clock */ - __HAL_SD_SDIO_ENABLE(); - - /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/ - /* No CMD response required */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdError(hsd); - - if(errorstate != SD_OK) - { - /* CMD Response Timeout (wait for CMDSENT flag) */ - return errorstate; - } - - /* CMD8: SEND_IF_COND ------------------------------------------------------*/ - /* Send CMD8 to verify SD card interface operating condition */ - /* Argument: - [31:12]: Reserved (shall be set to '0') - - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) - - [7:0]: Check Pattern (recommended 0xAA) */ - /* CMD Response: R7 */ - sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN; - sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp7Error(hsd); - - if (errorstate == SD_OK) - { - /* SD Card 2.0 */ - hsd->CardType = STD_CAPACITY_SD_CARD_V2_0; - sdtype = SD_HIGH_CAPACITY; - } - - /* Send CMD55 */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - /* If errorstate is Command Timeout, it is a MMC card */ - /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch) - or SD card 1.x */ - if(errorstate == SD_OK) - { - /* SD CARD */ - /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ - while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL)) - { - - /* SEND CMD55 APP_CMD with RCA as 0 */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Send CMD41 */ - sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp3Error(hsd); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Get command response */ - response = SDIO_GetResponse(SDIO_RESP1); - - /* Get operating voltage*/ - validvoltage = (((response >> 31) == 1) ? 1 : 0); - - count++; - } - - if(count >= SD_MAX_VOLT_TRIAL) - { - errorstate = SD_INVALID_VOLTRANGE; - - return errorstate; - } - - if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */ - { - hsd->CardType = HIGH_CAPACITY_SD_CARD; - } - - } /* else MMC Card */ - - return errorstate; -} - -/** - * @brief Turns the SDIO output signals off. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - - /* Set Power State to OFF */ - SDIO_PowerState_OFF(hsd->Instance); - - return errorstate; -} - -/** - * @brief Returns the current card's status. - * @param hsd: SD handle - * @param pCardStatus: pointer to the buffer that will contain the SD card - * status (Card Status register) - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - if(pCardStatus == NULL) - { - errorstate = SD_INVALID_PARAMETER; - - return errorstate; - } - - /* Send Status command */ - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Get SD card status */ - *pCardStatus = SDIO_GetResponse(SDIO_RESP1); - - return errorstate; -} - -/** - * @brief Checks for error conditions for CMD0. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t timeout, tmp; - - timeout = SDIO_CMD0TIMEOUT; - - tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT); - - while((timeout > 0) && (!tmp)) - { - tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT); - timeout--; - } - - if(timeout == 0) - { - errorstate = SD_CMD_RSP_TIMEOUT; - return errorstate; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - return errorstate; -} - -/** - * @brief Checks for error conditions for R7 response. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_ERROR; - uint32_t timeout = SDIO_CMD0TIMEOUT, tmp; - - tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT); - - while((!tmp) && (timeout > 0)) - { - tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT); - timeout--; - } - - tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - if((timeout == 0) || tmp) - { - /* Card is not V2.0 compliant or card does not support the set voltage range */ - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND)) - { - /* Card is SD V2.0 compliant */ - errorstate = SD_OK; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND); - - return errorstate; - } - - return errorstate; -} - -/** - * @brief Checks for error conditions for R1 response. - * @param hsd: SD handle - * @param SD_CMD: The sent command index - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t response_r1; - - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) - { - } - - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) - { - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) - { - errorstate = SD_CMD_CRC_FAIL; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); - - return errorstate; - } - - /* Check response received is of desired command */ - if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD) - { - errorstate = SD_ILLEGAL_CMD; - - return errorstate; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* We have received response, retrieve it for analysis */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return errorstate; - } - - if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - - return errorstate; -} - -/** - * @brief Checks for error conditions for R3 (OCR) response. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - - while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) - { - } - - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) - { - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - return errorstate; -} - -/** - * @brief Checks for error conditions for R2 (CID or CSD) response. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - - while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) - { - } - - if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) - { - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) - { - errorstate = SD_CMD_CRC_FAIL; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); - - return errorstate; - } - else - { - /* No error flag set */ - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - return errorstate; -} - -/** - * @brief Checks for error conditions for R6 (RCA) response. - * @param hsd: SD handle - * @param SD_CMD: The sent command index - * @param pRCA: Pointer to the variable that will contain the SD card relative - * address RCA - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA) -{ - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t response_r1; - - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) - { - } - - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) - { - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) - { - errorstate = SD_CMD_CRC_FAIL; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); - - return errorstate; - } - else - { - /* No error flag set */ - } - - /* Check response received is of desired command */ - if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD) - { - errorstate = SD_ILLEGAL_CMD; - - return errorstate; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - /* We have received response, retrieve it. */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO) - { - *pRCA = (uint16_t) (response_r1 >> 16); - - return errorstate; - } - - if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - return errorstate; -} - -/** - * @brief Enables the SDIO wide bus mode. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - uint32_t scr[2] = {0, 0}; - - if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) - { - errorstate = SD_LOCK_UNLOCK_FAILED; - - return errorstate; - } - - /* Get SCR Register */ - errorstate = SD_FindSCR(hsd, scr); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* If requested card supports wide bus operation */ - if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO) - { - /* Send CMD55 APP_CMD with argument as card's RCA.*/ - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ - sdio_cmdinitstructure.Argument = 2; - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH); - - if(errorstate != SD_OK) - { - return errorstate; - } - - return errorstate; - } - else - { - errorstate = SD_REQUEST_NOT_APPLICABLE; - - return errorstate; - } -} - -/** - * @brief Disables the SDIO wide bus mode. - * @param hsd: SD handle - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - - uint32_t scr[2] = {0, 0}; - - if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED) - { - errorstate = SD_LOCK_UNLOCK_FAILED; - - return errorstate; - } - - /* Get SCR Register */ - errorstate = SD_FindSCR(hsd, scr); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* If requested card supports 1 bit mode operation */ - if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO) - { - /* Send CMD55 APP_CMD with argument as card's RCA */ - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH); - - if(errorstate != SD_OK) - { - return errorstate; - } - - return errorstate; - } - else - { - errorstate = SD_REQUEST_NOT_APPLICABLE; - - return errorstate; - } -} - - -/** - * @brief Finds the SD card SCR register value. - * @param hsd: SD handle - * @param pSCR: pointer to the buffer that will contain the SCR value - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - SDIO_DataInitTypeDef sdio_datainitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - uint32_t index = 0; - uint32_t tempscr[2] = {0, 0}; - - /* Set Block Size To 8 Bytes */ - /* Send CMD55 APP_CMD with argument as card's RCA */ - sdio_cmdinitstructure.Argument = (uint32_t)8; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN); - - if(errorstate != SD_OK) - { - return errorstate; - } - - /* Send CMD55 APP_CMD with argument as card's RCA */ - sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD); - - if(errorstate != SD_OK) - { - return errorstate; - } - sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT; - sdio_datainitstructure.DataLength = 8; - sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B; - sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; - sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK; - sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE; - SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure); - - /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ - sdio_cmdinitstructure.Argument = 0; - sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - /* Check for error conditions */ - errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR); - - if(errorstate != SD_OK) - { - return errorstate; - } -#ifdef SDIO_STA_STBITERR - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR)) -#else /* SDIO_STA_STBITERR not defined */ - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) -#endif /* SDIO_STA_STBITERR */ - { - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) - { - *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance); - index++; - } - } - - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); - - errorstate = SD_DATA_TIMEOUT; - - return errorstate; - } - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); - - errorstate = SD_DATA_CRC_FAIL; - - return errorstate; - } - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); - - errorstate = SD_RX_OVERRUN; - - return errorstate; - } -#ifdef SDIO_STA_STBITERR - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR)) - { - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR); - - errorstate = SD_START_BIT_ERR; - - return errorstate; - } -#endif /* SDIO_STA_STBITERR */ - else - { - /* No error flag set */ - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) |\ - ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24); - - *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) |\ - ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24); - - return errorstate; -} - -/** - * @brief Checks if the SD card is in programming state. - * @param hsd: SD handle - * @param pStatus: pointer to the variable that will contain the SD card state - * @retval SD Card error state - */ -static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus) -{ - SDIO_CmdInitTypeDef sdio_cmdinitstructure; - HAL_SD_ErrorTypedef errorstate = SD_OK; - __IO uint32_t responseR1 = 0; - - sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16); - sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS; - sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT; - sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO; - sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE; - SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure); - - while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) - { - } - - if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT)) - { - errorstate = SD_CMD_RSP_TIMEOUT; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT); - - return errorstate; - } - else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL)) - { - errorstate = SD_CMD_CRC_FAIL; - - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL); - - return errorstate; - } - else - { - /* No error flag set */ - } - - /* Check response received is of desired command */ - if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS) - { - errorstate = SD_ILLEGAL_CMD; - - return errorstate; - } - - /* Clear all the static flags */ - __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); - - - /* We have received response, retrieve it for analysis */ - responseR1 = SDIO_GetResponse(SDIO_RESP1); - - /* Find out card status */ - *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F); - - if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return errorstate; - } - - if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - - return errorstate; -} - -/** - * @} - */ - -#endif /* HAL_SD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3