From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c | 1125 -------------------- 1 file changed, 1125 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c deleted file mode 100644 index 4b0a4dc..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c +++ /dev/null @@ -1,1125 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_nand.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief NAND HAL module driver. - * This file provides a generic firmware to drive NAND memories mounted - * as external device. - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - This driver is a generic layered driver which contains a set of APIs used to - control NAND flash memories. It uses the FMC/FSMC layer functions to interface - with NAND devices. This driver is used as follows: - - (+) NAND flash memory configuration sequence using the function HAL_NAND_Init() - with control and timing parameters for both common and attribute spaces. - - (+) Read NAND flash memory maker and device IDs using the function - HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef - structure declared by the function caller. - - (+) Access NAND flash memory by read/write operations using the functions - HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea() - to read/write page(s)/spare area(s). These functions use specific device - information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef - structure. The read/write address information is contained by the Nand_Address_Typedef - structure passed as parameter. - - (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset(). - - (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block(). - The erase block address information is contained in the Nand_Address_Typedef - structure passed as parameter. - - (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status(). - - (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/ - HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction - feature or the function HAL_NAND_GetECC() to get the ECC correction code. - - (+) You can monitor the NAND device HAL state by calling the function - HAL_NAND_GetState() - - [..] - (@) This driver is a set of generic APIs which handle standard NAND flash operations. - If a NAND flash device contains different operations and/or implementations, - it should be implemented separately. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - - -#ifdef HAL_NAND_MODULE_ENABLED - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) - -/** @defgroup NAND NAND - * @brief NAND HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup NAND_Private_Constants NAND Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup NAND_Private_Macros NAND Private Macros - * @{ - */ - -/** - * @} - */ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup NAND_Exported_Functions NAND Exported Functions - * @{ - */ - -/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - ============================================================================== - ##### NAND Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to initialize/de-initialize - the NAND memory - -@endverbatim - * @{ - */ - -/** - * @brief Perform NAND memory Initialization sequence - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param ComSpace_Timing: pointer to Common space timing structure - * @param AttSpace_Timing: pointer to Attribute space timing structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing) -{ - /* Check the NAND handle state */ - if(hnand == NULL) - { - return HAL_ERROR; - } - - if(hnand->State == HAL_NAND_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hnand->Lock = HAL_UNLOCKED; - /* Initialize the low level hardware (MSP) */ - HAL_NAND_MspInit(hnand); - } - - /* Initialize NAND control Interface */ - FMC_NAND_Init(hnand->Instance, &(hnand->Init)); - - /* Initialize NAND common space timing Interface */ - FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank); - - /* Initialize NAND attribute space timing Interface */ - FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank); - - /* Enable the NAND device */ - __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank); - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Perform NAND memory De-Initialization sequence - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand) -{ - /* Initialize the low level hardware (MSP) */ - HAL_NAND_MspDeInit(hnand); - - /* Configure the NAND registers with their reset values */ - FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank); - - /* Reset the NAND controller state */ - hnand->State = HAL_NAND_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief NAND MSP Init - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval None - */ -__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_NAND_MspInit could be implemented in the user file - */ -} - -/** - * @brief NAND MSP DeInit - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval None - */ -__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_NAND_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief This function handles NAND device interrupt request. - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL status -*/ -void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) -{ - /* Check NAND interrupt Rising edge flag */ - if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE)) - { - /* NAND interrupt callback*/ - HAL_NAND_ITCallback(hnand); - - /* Clear NAND interrupt Rising edge pending bit */ - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE); - } - - /* Check NAND interrupt Level flag */ - if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL)) - { - /* NAND interrupt callback*/ - HAL_NAND_ITCallback(hnand); - - /* Clear NAND interrupt Level pending bit */ - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL); - } - - /* Check NAND interrupt Falling edge flag */ - if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE)) - { - /* NAND interrupt callback*/ - HAL_NAND_ITCallback(hnand); - - /* Clear NAND interrupt Falling edge pending bit */ - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE); - } - - /* Check NAND interrupt FIFO empty flag */ - if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT)) - { - /* NAND interrupt callback*/ - HAL_NAND_ITCallback(hnand); - - /* Clear NAND interrupt FIFO empty pending bit */ - __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT); - } - -} - -/** - * @brief NAND interrupt feature callback - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval None - */ -__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_NAND_ITCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions - * @brief Input Output and memory control functions - * - @verbatim - ============================================================================== - ##### NAND Input and Output functions ##### - ============================================================================== - [..] - This section provides functions allowing to use and control the NAND - memory - -@endverbatim - * @{ - */ - -/** - * @brief Read the NAND memory electronic signature - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pNAND_ID: NAND ID structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID) -{ - __IO uint32_t data = 0; - uint32_t deviceaddress = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Send Read ID command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID; - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; - - /* Read the electronic signature from NAND flash */ - data = *(__IO uint32_t *)deviceaddress; - - /* Return the data read */ - pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data); - pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data); - pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data); - pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data); - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief NAND memory reset - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand) -{ - uint32_t deviceaddress = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Send NAND reset command */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF; - - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; - -} - -/** - * @brief Read Page(s) from NAND memory block - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress : pointer to NAND address structure - * @param pBuffer : pointer to destination read buffer - * @param NumPageToRead : number of pages to read from block - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead) -{ - __IO uint32_t index = 0; - uint32_t deviceaddress = 0, size = 0, numpagesread = 0, addressstatus = NAND_VALID_ADDRESS; - NAND_AddressTypeDef nandaddress; - uint32_t addressoffset = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Save the content of pAddress as it will be modified */ - nandaddress.Block = pAddress->Block; - nandaddress.Page = pAddress->Page; - nandaddress.Zone = pAddress->Zone; - - /* Page(s) read loop */ - while((NumPageToRead != 0) && (addressstatus == NAND_VALID_ADDRESS)) - { - /* update the buffer size */ - size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread); - - /* Get the address offset */ - addressoffset = ARRAY_ADDRESS(&nandaddress, hnand); - - /* Send read page command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; - - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset); - - /* for 512 and 1 GB devices, 4th cycle is required */ - if(hnand->Info.BlockNbr >= 1024) - { - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset); - } - - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; - - /* Get Data into Buffer */ - for(index = size; index != 0; index--) - { - *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress; - } - - /* Increment read pages number */ - numpagesread++; - - /* Decrement pages to read */ - NumPageToRead--; - - /* Increment the NAND address */ - addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress); - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; - -} - -/** - * @brief Write Page(s) to NAND memory block - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress : pointer to NAND address structure - * @param pBuffer : pointer to source buffer to write - * @param NumPageToWrite : number of pages to write to block - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite) -{ - __IO uint32_t index = 0; - uint32_t tickstart = 0; - uint32_t deviceaddress = 0 , size = 0, numpageswritten = 0, addressstatus = NAND_VALID_ADDRESS; - NAND_AddressTypeDef nandaddress; - uint32_t addressoffset = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Save the content of pAddress as it will be modified */ - nandaddress.Block = pAddress->Block; - nandaddress.Page = pAddress->Page; - nandaddress.Zone = pAddress->Zone; - - /* Page(s) write loop */ - while((NumPageToWrite != 0) && (addressstatus == NAND_VALID_ADDRESS)) - { - /* update the buffer size */ - size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpageswritten); - - /* Get the address offset */ - addressoffset = ARRAY_ADDRESS(&nandaddress, hnand); - - /* Send write page command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; - - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset); - - /* for 512 and 1 GB devices, 4th cycle is required */ - if(hnand->Info.BlockNbr >= 1024) - { - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset); - } - - /* Write data to memory */ - for(index = size; index != 0; index--) - { - *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++; - } - - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Read status until NAND is ready */ - while(HAL_NAND_Read_Status(hnand) != NAND_READY) - { - if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT) - { - return HAL_TIMEOUT; - } - } - - /* Increment written pages number */ - numpageswritten++; - - /* Decrement pages to write */ - NumPageToWrite--; - - /* Increment the NAND address */ - addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress); - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief Read Spare area(s) from NAND memory - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress : pointer to NAND address structure - * @param pBuffer: pointer to source buffer to write - * @param NumSpareAreaToRead: Number of spare area to read - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead) -{ - __IO uint32_t index = 0; - uint32_t deviceaddress = 0, size = 0, num_spare_area_read = 0, addressstatus = NAND_VALID_ADDRESS; - NAND_AddressTypeDef nandaddress; - uint32_t addressoffset = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Save the content of pAddress as it will be modified */ - nandaddress.Block = pAddress->Block; - nandaddress.Page = pAddress->Page; - nandaddress.Zone = pAddress->Zone; - - /* Spare area(s) read loop */ - while((NumSpareAreaToRead != 0) && (addressstatus == NAND_VALID_ADDRESS)) - { - /* update the buffer size */ - size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_read); - - /* Get the address offset */ - addressoffset = ARRAY_ADDRESS(&nandaddress, hnand); - - /* Send read spare area command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; - - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset); - - /* for 512 and 1 GB devices, 4th cycle is required */ - if(hnand->Info.BlockNbr >= 1024) - { - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset); - } - - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; - - /* Get Data into Buffer */ - for (index = size ;index != 0; index--) - { - *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress; - } - - /* Increment read spare areas number */ - num_spare_area_read++; - - /* Decrement spare areas to read */ - NumSpareAreaToRead--; - - /* Increment the NAND address */ - addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress); - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief Write Spare area(s) to NAND memory - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress : pointer to NAND address structure - * @param pBuffer : pointer to source buffer to write - * @param NumSpareAreaTowrite : number of spare areas to write to block - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite) -{ - __IO uint32_t index = 0; - uint32_t tickstart = 0; - uint32_t deviceaddress = 0, size = 0, num_spare_area_written = 0, addressstatus = NAND_VALID_ADDRESS; - NAND_AddressTypeDef nandaddress; - uint32_t addressoffset = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the FMC_NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Save the content of pAddress as it will be modified */ - nandaddress.Block = pAddress->Block; - nandaddress.Page = pAddress->Page; - nandaddress.Zone = pAddress->Zone; - - /* Spare area(s) write loop */ - while((NumSpareAreaTowrite != 0) && (addressstatus == NAND_VALID_ADDRESS)) - { - /* update the buffer size */ - size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written); - - /* Get the address offset */ - addressoffset = ARRAY_ADDRESS(&nandaddress, hnand); - - /* Send write Spare area command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; - - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset); - - /* for 512 and 1 GB devices, 4th cycle is required */ - if(hnand->Info.BlockNbr >= 1024) - { - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset); - } - - /* Write data to memory */ - for(; index < size; index++) - { - *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++; - } - - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Read status until NAND is ready */ - while(HAL_NAND_Read_Status(hnand) != NAND_READY) - { - if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT) - { - return HAL_TIMEOUT; - } - } - - /* Increment written spare areas number */ - num_spare_area_written++; - - /* Decrement spare areas to write */ - NumSpareAreaTowrite--; - - /* Increment the NAND address */ - addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress); - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief NAND memory Block erase - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress : pointer to NAND address structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress) -{ - uint32_t deviceaddress = 0; - uint32_t tickstart = 0; - - /* Process Locked */ - __HAL_LOCK(hnand); - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Send Erase block command sequence */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0; - - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); - - /* for 512 and 1 GB devices, 4th cycle is required */ - if(hnand->Info.BlockNbr >= 1024) - { - *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); - } - - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1; - - /* Update the NAND controller state */ - hnand->State = HAL_NAND_STATE_READY; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Read status until NAND is ready */ - while(HAL_NAND_Read_Status(hnand) != NAND_READY) - { - if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT) - { - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_TIMEOUT; - } - } - - /* Process unlocked */ - __HAL_UNLOCK(hnand); - - return HAL_OK; -} - -/** - * @brief NAND memory read status - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval NAND status - */ -uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand) -{ - uint32_t data = 0; - uint32_t deviceaddress = 0; - - /* Identify the device address */ - if(hnand->Init.NandBank == FMC_NAND_BANK2) - { - deviceaddress = NAND_DEVICE1; - } - else - { - deviceaddress = NAND_DEVICE2; - } - - /* Send Read status operation command */ - *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS; - - /* Read status register data */ - data = *(__IO uint8_t *)deviceaddress; - - /* Return the status */ - if((data & NAND_ERROR) == NAND_ERROR) - { - return NAND_ERROR; - } - else if((data & NAND_READY) == NAND_READY) - { - return NAND_READY; - } - - return NAND_BUSY; -} - -/** - * @brief Increment the NAND memory address - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param pAddress: pointer to NAND address structure - * @retval The new status of the increment address operation. It can be: - * - NAND_VALID_ADDRESS: When the new address is valid address - * - NAND_INVALID_ADDRESS: When the new address is invalid address - */ -uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress) -{ - uint32_t status = NAND_VALID_ADDRESS; - - /* Increment page address */ - pAddress->Page++; - - /* Check NAND address is valid */ - if(pAddress->Page == hnand->Info.BlockSize) - { - pAddress->Page = 0; - pAddress->Block++; - - if(pAddress->Block == hnand->Info.ZoneSize) - { - pAddress->Block = 0; - pAddress->Zone++; - - if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr)) - { - status = NAND_INVALID_ADDRESS; - } - } - } - - return (status); -} -/** - * @} - */ - -/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * -@verbatim - ============================================================================== - ##### NAND Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the NAND interface. - -@endverbatim - * @{ - */ - - -/** - * @brief Enables dynamically NAND ECC feature. - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand) -{ - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Enable ECC feature */ - FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank); - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand) -{ - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Disable ECC feature */ - FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank); - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Disables dynamically NAND ECC feature. - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @param ECCval: pointer to ECC value - * @param Timeout: maximum timeout to wait - * @retval HAL status - */ -HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the NAND controller state */ - if(hnand->State == HAL_NAND_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_BUSY; - - /* Get NAND ECC value */ - status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout); - - /* Update the NAND state */ - hnand->State = HAL_NAND_STATE_READY; - - return status; -} - -/** - * @} - */ - - -/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - ============================================================================== - ##### NAND State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the NAND controller - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief return the NAND state - * @param hnand: pointer to a NAND_HandleTypeDef structure that contains - * the configuration information for NAND module. - * @retval HAL state - */ -HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand) -{ - return hnand->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ - STM32F446xx */ - -#endif /* HAL_NAND_MODULE_ENABLED */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3