From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c | 3649 -------------------- 1 file changed, 3649 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c') diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c deleted file mode 100644 index f7ab5ed..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c +++ /dev/null @@ -1,3649 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief I2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (I2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The I2C HAL driver can be used as follows: - - (#) Declare a I2C_HandleTypeDef handle structure, for example: - I2C_HandleTypeDef hi2c; - - (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API: - (##) Enable the I2Cx interface clock - (##) I2C pins configuration - (+++) Enable the clock for the I2C GPIOs - (+++) Configure I2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the I2Cx interrupt priority - (+++) Enable the NVIC I2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx Stream - (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx Stream - - (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, - Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. - - (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. - - (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() - - (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback - (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback - (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback - (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using - HAL_I2C_Mem_Write_IT() - (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback - (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using - HAL_I2C_Mem_Read_IT() - (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non blocking mode (DMA) using - HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback - (+) Receive in master mode an amount of data in non blocking mode (DMA) using - HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback - (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using - HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback - (+) Receive in slave mode an amount of data in non blocking mode (DMA) using - HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using - HAL_I2C_Mem_Write_DMA() - (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback - (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using - HAL_I2C_Mem_Read_DMA() - (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2C_ErrorCallback - - - *** I2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in I2C HAL driver. - - (+) __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) __HAL_I2C_GET_FLAG : Checks whether the specified I2C flag is set or not - (+) __HAL_I2C_CLEAR_FLAG : Clear the specified I2C pending flag - (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt - - [..] - (@) You can refer to the I2C HAL driver header file for more useful macros - - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2C I2C - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup I2C_Private_Constants - * @{ - */ -#define I2C_TIMEOUT_FLAG ((uint32_t)35) /* 35 ms */ -#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000) /* 10 s */ -#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)10000) /* 10 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup I2C_Private_Functions - * @{ - */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAError(DMA_HandleTypeDef *hdma); - -static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout); -static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout); -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout); -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout); -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout); -static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout); - -static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c); - -static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c); -static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup I2C_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the I2Cx peripheral: - - (+) User must Implement HAL_I2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC). - - (+) Call the function HAL_I2C_Init() to configure the selected device with - the selected configuration: - (++) Communication Speed - (++) Duty cycle - (++) Addressing mode - (++) Own Address 1 - (++) Dual Addressing mode - (++) Own Address 2 - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_I2C_DeInit() to restore the default configuration - of the selected I2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the I2C according to the specified parameters - * in the I2C_InitTypeDef and create the associated handle. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) -{ - uint32_t freqrange = 0; - uint32_t pclk1 = 0; - - /* Check the I2C handle allocation */ - if(hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed)); - assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); - assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); - assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); - assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); - assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); - assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); - - if(hi2c->State == HAL_I2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2c->Lock = HAL_UNLOCKED; - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_I2C_MspInit(hi2c); - } - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get PCLK1 frequency */ - pclk1 = HAL_RCC_GetPCLK1Freq(); - - /* Calculate frequency range */ - freqrange = I2C_FREQRANGE(pclk1); - - /*---------------------------- I2Cx CR2 Configuration ----------------------*/ - /* Configure I2Cx: Frequency range */ - hi2c->Instance->CR2 = freqrange; - - /*---------------------------- I2Cx TRISE Configuration --------------------*/ - /* Configure I2Cx: Rise Time */ - hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed); - - /*---------------------------- I2Cx CCR Configuration ----------------------*/ - /* Configure I2Cx: Speed */ - hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle); - - /*---------------------------- I2Cx CR1 Configuration ----------------------*/ - /* Configure I2Cx: Generalcall and NoStretch mode */ - hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); - - /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ - /* Configure I2Cx: Own Address1 and addressing mode */ - hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1); - - /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ - /* Configure I2Cx: Dual mode and Own Address2 */ - hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2); - - /* Enable the selected I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the I2C peripheral. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if(hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the I2C Peripheral Clock */ - __HAL_I2C_DISABLE(hi2c); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_I2C_MspDeInit(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->State = HAL_I2C_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief I2C MSP Init. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief I2C MSP DeInit - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2C_Master_Transmit() - (++) HAL_I2C_Master_Receive() - (++) HAL_I2C_Slave_Transmit() - (++) HAL_I2C_Slave_Receive() - (++) HAL_I2C_Mem_Write() - (++) HAL_I2C_Mem_Read() - (++) HAL_I2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2C_Master_Transmit_IT() - (++) HAL_I2C_Master_Receive_IT() - (++) HAL_I2C_Slave_Transmit_IT() - (++) HAL_I2C_Slave_Receive_IT() - (++) HAL_I2C_Mem_Write_IT() - (++) HAL_I2C_Mem_Read_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2C_Master_Transmit_DMA() - (++) HAL_I2C_Master_Receive_DMA() - (++) HAL_I2C_Slave_Transmit_DMA() - (++) HAL_I2C_Slave_Receive_DMA() - (++) HAL_I2C_Mem_Write_DMA() - (++) HAL_I2C_Mem_Read_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2C_MemTxCpltCallback() - (++) HAL_I2C_MemRxCpltCallback() - (++) HAL_I2C_MasterTxCpltCallback() - (++) HAL_I2C_MasterRxCpltCallback() - (++) HAL_I2C_SlaveTxCpltCallback() - (++) HAL_I2C_SlaveRxCpltCallback() - (++) HAL_I2C_ErrorCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Send Slave Address */ - if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - while(Size > 0) - { - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - - if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) - { - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - } - } - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Send Slave Address */ - if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(Size == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - } - else if(Size == 2) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Enable Pos */ - hi2c->Instance->CR1 |= I2C_CR1_POS; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Enable Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while(Size > 0) - { - if(Size <= 3) - { - /* One byte */ - if(Size == 1) - { - /* Wait until RXNE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - /* Two bytes */ - else if(Size == 2) - { - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - /* 3 Last bytes */ - else - { - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - } - else - { - /* Wait until RXNE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) - { - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - } - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* If 10bit addressing mode is selected */ - if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while(Size > 0) - { - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - - if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) - { - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - } - } - - /* Wait until AF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Address Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - while(Size > 0) - { - /* Wait until RXNE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) - { - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - } - - /* Wait until STOP flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_STOPFLAG(hi2c); - - /* Disable Address Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Send Slave Address */ - if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Send Slave Address */ - if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(hi2c->XferCount == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - } - else if(hi2c->XferCount == 2) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Enable Pos */ - hi2c->Instance->CR1 |= I2C_CR1_POS; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Enable Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in no-blocking mode with DMA - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); - - /* Send Slave Address */ - if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in no-blocking mode with DMA - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); - - /* Send Slave Address */ - if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(Size == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - } - else - { - /* Enable Last DMA bit */ - hi2c->Instance->CR2 |= I2C_CR2_LAST; - } - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* If 7bit addressing mode is selected */ - if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in no-blocking mode with DMA - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - while(Size > 0) - { - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - - if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0)) - { - /* Write data to DR */ - hi2c->Instance->DR = (*pData++); - Size--; - } - } - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(Size == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - } - else if(Size == 2) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Enable Pos */ - hi2c->Instance->CR1 |= I2C_CR1_POS; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - while(Size > 0) - { - if(Size <= 3) - { - /* One byte */ - if(Size== 1) - { - /* Wait until RXNE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - /* Two bytes */ - else if(Size == 2) - { - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - /* 3 Last bytes */ - else - { - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Wait until BTF flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - } - else - { - /* Wait until RXNE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) - { - /* Read data from DR */ - (*pData++) = hi2c->Instance->DR; - Size--; - } - } - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(hi2c->XferCount == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - } - else if(hi2c->XferCount == 2) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Enable Pos */ - hi2c->Instance->CR1 |= I2C_CR1_POS; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - else - { - /* Enable Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable EVT, BUF and ERR interrupt */ - __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size); - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if(hi2c->State == HAL_I2C_STATE_READY) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - hi2c->pBuffPtr = pData; - hi2c->XferSize = Size; - hi2c->XferCount = Size; - - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Enable the DMA Stream */ - HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size); - - /* Send Slave Address and Memory Address */ - if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_TIMEOUT; - } - } - - if(Size == 1) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - } - else - { - /* Enable Last DMA bit */ - hi2c->Instance->CR2 |= I2C_CR2_LAST; - } - - /* Enable DMA Request */ - hi2c->Instance->CR2 |= I2C_CR2_DMAEN; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param Trials: Number of trials - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) -{ - uint32_t tickstart = 0, tmp1 = 0, tmp2 = 0, tmp3 = 0, I2C_Trials = 1; - - if(hi2c->State == HAL_I2C_STATE_READY) - { - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Pos */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - hi2c->State = HAL_I2C_STATE_BUSY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - do - { - /* Generate Start */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR or AF flag are set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - tmp3 = hi2c->State; - while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT)) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - hi2c->State = HAL_I2C_STATE_TIMEOUT; - } - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - tmp3 = hi2c->State; - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if the ADDR flag has been set */ - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET) - { - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Clear ADDR Flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_TIMEOUT; - } - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Clear AF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Wait until BUSY flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK) - { - return HAL_TIMEOUT; - } - - } - }while(I2C_Trials++ < Trials); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief This function handles I2C event interrupt request. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0, tmp4 = 0; - /* Master mode selected */ - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL) == SET) - { - /* I2C in mode Transmitter -----------------------------------------------*/ - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == SET) - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); - tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); - tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); - /* TXE set and BTF reset -----------------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) - { - I2C_MasterTransmit_TXE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if((tmp3 == SET) && (tmp4 == SET)) - { - I2C_MasterTransmit_BTF(hi2c); - } - } - /* I2C in mode Receiver --------------------------------------------------*/ - else - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); - tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); - tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); - /* RXNE set and BTF reset -----------------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) - { - I2C_MasterReceive_RXNE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if((tmp3 == SET) && (tmp4 == SET)) - { - I2C_MasterReceive_BTF(hi2c); - } - } - } - /* Slave mode selected */ - else - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_EVT)); - tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp4 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA); - /* ADDR set --------------------------------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET)) - { - I2C_Slave_ADDR(hi2c); - } - /* STOPF set --------------------------------------------------------------*/ - else if((tmp3 == SET) && (tmp2 == SET)) - { - I2C_Slave_STOPF(hi2c); - } - /* I2C in mode Transmitter -----------------------------------------------*/ - else if(tmp4 == SET) - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); - tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); - tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); - /* TXE set and BTF reset -----------------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) - { - I2C_SlaveTransmit_TXE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if((tmp3 == SET) && (tmp4 == SET)) - { - I2C_SlaveTransmit_BTF(hi2c); - } - } - /* I2C in mode Receiver --------------------------------------------------*/ - else - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF); - tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF); - tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT); - /* RXNE set and BTF reset ----------------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET)) - { - I2C_SlaveReceive_RXNE(hi2c); - } - /* BTF set -------------------------------------------------------------*/ - else if((tmp3 == SET) && (tmp4 == SET)) - { - I2C_SlaveReceive_BTF(hi2c); - } - } - } -} - -/** - * @brief This function handles I2C error interrupt request. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0; - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); - /* I2C Bus error interrupt occurred ----------------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); - /* I2C Arbitration Loss error interrupt occurred ---------------------------*/ - if((tmp1 == SET) && (tmp2 == SET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); - /* I2C Acknowledge failure error interrupt occurred ------------------------*/ - if((tmp1 == SET) && (tmp2 == SET)) - { - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL); - tmp2 = hi2c->XferCount; - tmp3 = hi2c->State; - if((tmp1 == RESET) && (tmp2 == 0) && (tmp3 == HAL_I2C_STATE_BUSY_TX)) - { - I2C_Slave_AF(hi2c); - } - else - { - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR); - tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR); - /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/ - if((tmp1 == SET) && (tmp2 == SET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - } - - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - hi2c->State = HAL_I2C_STATE_READY; - - /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */ - hi2c->Instance->CR1 &= ~I2C_CR1_POS; - - HAL_I2C_ErrorCallback(hi2c); - } -} - -/** - * @brief Master Tx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ -__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2C error callbacks. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval None - */ - __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the I2C state. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL state - */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) -{ - return hi2c->State; -} - -/** - * @brief Return the I2C error code - * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. -* @retval I2C Error Code -*/ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) -{ - return hi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @brief Handle TXE flag for Master - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c) -{ - /* Write data to DR */ - hi2c->Instance->DR = (*hi2c->pBuffPtr++); - hi2c->XferCount--; - - if(hi2c->XferCount == 0) - { - /* Disable BUF interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - } - - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Master transmitter - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount != 0) - { - /* Write data to DR */ - hi2c->Instance->DR = (*hi2c->pBuffPtr++); - hi2c->XferCount--; - } - else - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MemTxCpltCallback(hi2c); - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MasterTxCpltCallback(hi2c); - } - } - return HAL_OK; -} - -/** - * @brief Handle RXNE flag for Master - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) -{ - uint32_t tmp = 0; - - tmp = hi2c->XferCount; - if(tmp > 3) - { - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - } - else if((tmp == 2) || (tmp == 3)) - { - /* Disable BUF interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); - } - else - { - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - - if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MemRxCpltCallback(hi2c); - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MasterRxCpltCallback(hi2c); - } - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Master receiver - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount == 3) - { - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - } - else if(hi2c->XferCount == 2) - { - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - - /* Disable EVT and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); - - if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MemRxCpltCallback(hi2c); - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_MasterRxCpltCallback(hi2c); - } - } - else - { - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle TXE flag for Slave - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount != 0) - { - /* Write data to DR */ - hi2c->Instance->DR = (*hi2c->pBuffPtr++); - hi2c->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Slave transmitter - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount != 0) - { - /* Write data to DR */ - hi2c->Instance->DR = (*hi2c->pBuffPtr++); - hi2c->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle RXNE flag for Slave - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount != 0) - { - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle BTF flag for Slave receiver - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c) -{ - if(hi2c->XferCount != 0) - { - /* Read data from DR */ - (*hi2c->pBuffPtr++) = hi2c->Instance->DR; - hi2c->XferCount--; - } - return HAL_OK; -} - -/** - * @brief Handle ADD flag for Slave - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c) -{ - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - return HAL_OK; -} - -/** - * @brief Handle STOPF flag for Slave - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c) -{ - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Clear STOPF flag */ - __HAL_I2C_CLEAR_STOPFLAG(hi2c); - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_SlaveRxCpltCallback(hi2c); - - return HAL_OK; -} - -/** - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c) -{ - /* Disable EVT, BUF and ERR interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->State = HAL_I2C_STATE_READY; - - HAL_I2C_SlaveTxCpltCallback(hi2c); - - return HAL_OK; -} - -/** - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout) -{ - /* Generate Start */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - } - else - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); - - /* Wait until ADD10 flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); - } - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address for read request. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout) -{ - /* Enable Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Generate Start */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); - } - else - { - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); - - /* Wait until ADD10 flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Generate Restart */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send header of slave address */ - hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress); - } - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout) -{ - /* Generate Start */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* If Memory address size is 8Bit */ - if(MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param DevAddress: Target device address - * @param MemAddress: Internal memory address - * @param MemAddSize: Size of internal memory address - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout) -{ - /* Enable Acknowledge */ - hi2c->Instance->CR1 |= I2C_CR1_ACK; - - /* Generate Start */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_ADDRFLAG(hi2c); - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* If Memory address size is 8Bit */ - if(MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TXE flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Generate Restart */ - hi2c->Instance->CR1 |= I2C_CR1_START; - - /* Wait until SB flag is set */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Send slave address */ - hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); - - /* Wait until ADDR flag is set */ - if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK) - { - if(hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - return HAL_ERROR; - } - else - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief DMA I2C master transmit process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Wait until BTF flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_MasterTxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C slave transmit process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Wait until AF flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - } - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Disable Address Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_SlaveTxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C master receive process complete callback - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Disable Last DMA */ - hi2c->Instance->CR2 &= ~I2C_CR2_LAST; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_MasterRxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C slave receive process complete callback. - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Wait until STOPF flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - } - - /* Clear STOPF flag */ - __HAL_I2C_CLEAR_STOPFLAG(hi2c); - - /* Disable Address Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_SlaveRxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C Memory Write process complete callback - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Wait until BTF flag is reset */ - if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - } - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_MemTxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C Memory Read process complete callback - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Disable Last DMA */ - hi2c->Instance->CR2 &= ~I2C_CR2_LAST; - - /* Disable DMA Request */ - hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - /* Check if Errors has been detected during transfer */ - if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - HAL_I2C_ErrorCallback(hi2c); - } - else - { - HAL_I2C_MemRxCpltCallback(hi2c); - } -} - -/** - * @brief DMA I2C communication error callback. - * @param hdma: DMA handle - * @retval None - */ -static void I2C_DMAError(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - /* Disable Acknowledge */ - hi2c->Instance->CR1 &= ~I2C_CR1_ACK; - - hi2c->XferCount = 0; - - hi2c->State = HAL_I2C_STATE_READY; - - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - HAL_I2C_ErrorCallback(hi2c); -} - -/** - * @brief This function handles I2C Communication Timeout. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param Flag: specifies the I2C flag to check. - * @param Status: The new Flag status (SET or RESET). - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - if(Status == RESET) - { - while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - hi2c->State= HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_TIMEOUT; - } - } - } - } - else - { - while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - hi2c->State= HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for Master addressing phase. - * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @param Flag: specifies the I2C flag to check. - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) - { - if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - /* Generate Stop */ - hi2c->Instance->CR1 |= I2C_CR1_STOP; - - /* Clear AF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - hi2c->ErrorCode = HAL_I2C_ERROR_AF; - hi2c->State= HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - hi2c->State= HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3