From 4a38cf6f44d1c013cbe794093ea6c5b50337431a Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Thu, 14 Apr 2016 18:50:38 -0400 Subject: import mbed rtos library --- .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h | 535 --------------------- 1 file changed, 535 deletions(-) delete mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h (limited to 'Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h') diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h deleted file mode 100644 index efe0041..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h +++ /dev/null @@ -1,535 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_H -#define __STM32F4xx_HAL_I2C_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** - * @brief I2C Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz */ - - uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_general_call_addressing_mode */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_nostretch_mode */ - -}I2C_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */ - HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_MEM_BUSY_TX = 0x32, /*!< Memory Data Transmission process is ongoing */ - HAL_I2C_STATE_MEM_BUSY_RX = 0x42, /*!< Memory Data Reception process is ongoing */ - HAL_I2C_STATE_TIMEOUT = 0x03, /*!< I2C timeout state */ - HAL_I2C_STATE_ERROR = 0x04 /*!< I2C error state */ - -}HAL_I2C_StateTypeDef; - -/** - * @brief I2C handle Structure definition - */ -typedef struct -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - -}I2C_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_Error_Code I2C Error Code - * @brief I2C Error Code - * @{ - */ -#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */ -#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */ -#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */ -#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout Error */ -/** - * @} - */ - -/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode - * @{ - */ -#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000) -#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY -/** - * @} - */ - -/** @defgroup I2C_addressing_mode I2C addressing mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000) -#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000)) -/** - * @} - */ - -/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000) -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL -/** - * @} - */ - -/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000) -#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC -/** - * @} - */ - -/** @defgroup I2C_nostretch_mode I2C nostretch mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000) -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001) -#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @{ - */ -#define I2C_IT_BUF I2C_CR2_ITBUFEN -#define I2C_IT_EVT I2C_CR2_ITEVTEN -#define I2C_IT_ERR I2C_CR2_ITERREN -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ -#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000) -#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000) -#define I2C_FLAG_PECERR ((uint32_t)0x00011000) -#define I2C_FLAG_OVR ((uint32_t)0x00010800) -#define I2C_FLAG_AF ((uint32_t)0x00010400) -#define I2C_FLAG_ARLO ((uint32_t)0x00010200) -#define I2C_FLAG_BERR ((uint32_t)0x00010100) -#define I2C_FLAG_TXE ((uint32_t)0x00010080) -#define I2C_FLAG_RXNE ((uint32_t)0x00010040) -#define I2C_FLAG_STOPF ((uint32_t)0x00010010) -#define I2C_FLAG_ADD10 ((uint32_t)0x00010008) -#define I2C_FLAG_BTF ((uint32_t)0x00010004) -#define I2C_FLAG_ADDR ((uint32_t)0x00010002) -#define I2C_FLAG_SB ((uint32_t)0x00010001) -#define I2C_FLAG_DUALF ((uint32_t)0x00100080) -#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040) -#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020) -#define I2C_FLAG_GENCALL ((uint32_t)0x00100010) -#define I2C_FLAG_TRA ((uint32_t)0x00100004) -#define I2C_FLAG_BUSY ((uint32_t)0x00100002) -#define I2C_FLAG_MSL ((uint32_t)0x00100001) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) - -/** @brief Enable or disable the specified I2C interrupts. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) - -/** @brief Checks if the specified I2C interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __INTERRUPT__: specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2C flag is set or not. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag - * @arg I2C_FLAG_RXNE: Data register not empty flag - * @arg I2C_FLAG_STOPF: Stop detection flag - * @arg I2C_FLAG_ADD10: 10-bit header sent flag - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag - * Address matched flag - * @arg I2C_FLAG_SB: Start bit flag - * @arg I2C_FLAG_DUALF: Dual flag - * @arg I2C_FLAG_SMBHOST: SMBus host header - * @arg I2C_FLAG_SMBDEFAULT: SMBus default header - * @arg I2C_FLAG_GENCALL: General call header flag - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \ - ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK))) - -/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK)) - -/** @brief Clears the I2C ADDR pending flag. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - tmpreg = (__HANDLE__)->Instance->SR2; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clears the I2C STOPF pending flag. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE) -#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE) - -/** - * @} - */ - -/* Include I2C HAL Extension module */ -#include "stm32f4xx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions *****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions **************************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ -#define I2C_FLAG_MASK ((uint32_t)0x0000FFFF) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macros I2C Private Macros - * @{ - */ - -#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000) -#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1)) -#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1))) -#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9)) -#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS)) - -#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0))) -#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) - -#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) -#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) -#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) - -/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters - * @{ - */ -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \ - ((CYCLE) == I2C_DUTYCYCLE_16_9)) -#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \ - ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT)) -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000)) -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_I2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3