| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2017-07-31 | Report UART receive queue length, so we can tune it. | Paul Selkirk | |
| 2017-07-31 | Adapt uart_rx_thread to the post-thread tasking model, because we're still | Paul Selkirk | |
| subject to the same forces that made it a good idea in the first place. commit 2b6b9f8 Change RPC UART to have a high-priority thread monitoring a large(ish) DMA buffer, because we've observed out-of-order receives under load. | |||
| 2017-07-31 | Add a generic SysTick hook, to call a function on every 1ms tick, because ↵ | Paul Selkirk | |
| it's easier than setting up a dedicated timer. | |||
| 2017-06-17 | Fix optimization settings in HSM's build of libtfm. | Rob Austein | |
| 2017-05-28 | Stub out hal_allocate_static_memory() to avoid linker error. | Rob Austein | |
| This is a quick fix, so that we can get on with testing the ks9 branch changes. A better fix in the long run might be to add a third keystore ("ks_pin_read_only", or some such) which implemented the bare minimum interface that the bootloader needs and left everything else unimplemented. This would require a bit of refactoring the current PIN code to make it work right with both the bootloader's abbreivated keystore and the normal token keystore. Probably worth doing, but a bit of a can of worms, so postponing for now. | |||
| 2017-05-28 | Track API changes in libhal ks9 branch. | Rob Austein | |
| 2017-05-24 | Add task_yield_maybe | Paul Selkirk | |
| 2017-05-24 | Duh, actually build task_metrics | Paul Selkirk | |
| 2017-05-13 | Merge branch 'task_metrics' into profiling | Paul Selkirk | |
| 2017-05-10 | Sigh, right offset for the wrong register. Get the PC (the address we | Paul Selkirk | |
| interrupted) rather than LR (the return address from the function we interrupted). Also, change u_short and u_int to unsigned short and unsigned int, since gcc recently decided that those aren't part of the C99 standard. Finally, add profilable versions of memcpy, memset, and friends, because they get called a lot in the course of unit testing, and it would be nice to know who's calling them. | |||
| 2017-05-06 | Correct offset to get the PC. | Paul Selkirk | |
| A previous version of this code ran over the RTOS, where threads used the Process Stack, while the SysTick interrupt used the Main Stack. Now everything's on the main stack, so we need to account for 2 extra words that SysTick_Handler pushes on the stack at entry. | |||
| 2017-05-05 | Port profiling code, using a new SysTick hook and new CLI commands. | Paul Selkirk | |
| 2017-05-04 | Copy profiling code from MCUOnEclipse. | Paul Selkirk | |
| 2017-05-03 | Add some task metrics. | Paul Selkirk | |
| 2017-05-02 | Merge branch 'init_cleanup' into no-rtos | Paul Selkirk | |
| Clean up Makefiles and initialization code. | |||
| 2017-05-01 | Remove bogus counting-loop version of HAL_Delay. | Paul Selkirk | |
| 2017-05-01 | Add HAL_Delay as an alias for task_delay, but don't wedge if the tasker ↵ | Paul Selkirk | |
| isn't running yet. | |||
| 2017-05-01 | Addendum to commit e0e97a5: Remove all references to the tasker from cli-test. | Paul Selkirk | |
| 2017-04-30 | Need stdint.h if we're going to use uint32_t. | Rob Austein | |
| 2017-04-30 | Merge branch 'ksng' into no-rtos | Rob Austein | |
| Required minor manual intervention to resolve merge issues git had no way of understanding: git is clever, but not quite clever enough to understand that a commit in branch had removed the entire RTOS that a commit in the other branch was using. No big deal, just a couple of osDelay() calls needing conversion to HAL_Delay() or task_delay(). | |||
| 2017-04-29 | Add minimal mutexes to the minimal tasking system | Paul Selkirk | |
| 2017-04-29 | cli-test doesn't use the tasker, even though it might have previously used a ↵ | Paul Selkirk | |
| semaphore from the rtos | |||
| 2017-04-29 | Add task_delay. | Paul Selkirk | |
| 2017-04-29 | Simplify hsm makefile. | Paul Selkirk | |
| 2017-04-29 | Port cli-test to the new task API. | Paul Selkirk | |
| 2017-04-29 | Remove exception handlders that I probably shouldn't have defined in the ↵ | Paul Selkirk | |
| first place. | |||
| 2017-04-29 | Remove rtos source files. | Paul Selkirk | |
| 2017-04-27 | Replace the RTOS with a simple cooperative tasker. | Paul Selkirk | |
| There are no priorities and no preemption, so tasks run in a round-robin fashion, and explicitly yield control. | |||
| 2017-04-27 | Refactor cryptech_upload to work either directly or via cryptech_muxd. | Rob Austein | |
| 2017-04-26 | Add support for hal_sleep(). | Rob Austein | |
| 2017-04-17 | Rewrite the wait-for-ready loop in uart_send_bytes() to actually work. | Paul Selkirk | |
| 2017-04-17 | Add a short delay to osMailAlloc, since we're no longer calling it in an ISR. | Paul Selkirk | |
| 2017-04-17 | Use default SysTick interrupt priority. | Paul Selkirk | |
| We really don't want SysTick_Handler, which runs the task scheduler, to run at a higher priority than SVC_Handler, which runs supposedly-atomic operations like mutex locking and unlocking. I've seen a mutex lock/unlock mismatch which I think is due to interrupting rt_mut_release at a particularly inopportune moment. | |||
| 2017-04-17 | Merge remote-tracking branch 'origin/uart_rx_thread' into ksng | Paul Selkirk | |
| 2017-04-16 | Switch to libhal's CRC-32 code. | Rob Austein | |
| 2017-04-15 | Missing include files, doh. | Rob Austein | |
| 2017-04-15 | sw/stm32 Makefiles are a mess. | Rob Austein | |
| Apparently it's easier to duplicate source files into multiple project directories than to write Makefiles that do something sane. Feh. | |||
| 2017-04-15 | Move hal_log() support to separate module. | Rob Austein | |
| 2017-04-15 | Logging implementation for Alpha hardware. | Rob Austein | |
| 2017-04-12 | Handle race condition while fetching key metadata for display. | Rob Austein | |
| Fetching a list of keys and all of their metadata isn't an atomic process, nor, probably, should it be, so we need to cope with things like a key being deleted via the RPC interface while we're fetching its metadata for display on the console interface. | |||
| 2017-04-11 | Track API changes on sw/libhal pkcs8 branch. | Rob Austein | |
| 2017-04-01 | Change RPC UART to have a high-priority thread monitoring a large(ish) DMA | Paul Selkirk | |
| buffer, because we've observed out-of-order receives under load. | |||
| 2017-03-02 | Try to be a bit more robust in the face of normal errors. | Paul Selkirk | |
| If hal_rpc_server_dispatch() returns an XDR decode error because the request packet was too short, don't call Error_Handler() and kill the dispatch thread, just drop the request. Add more ibuf_queue entries, but don't panic and kill the dispatch thread if we can't get one, just drop the incoming character (which will lead to an XDR decode error if/when we finally get an ibuf). | |||
| 2017-02-23 | Add --pin and --quiet options. | Paul Selkirk | |
| 2017-02-23 | Speed up file upload enormously. | Paul Selkirk | |
| We need to start with a long serial timeout, in order to catch the reboot messages for a firmware upload (this has to be done through the bootloader). But once we start sending the file, cut the serial timeout to 1ms. (I've tested it down to 1us, but that may not work for everyone, and it doesn't improve performance in a statistically significant way.) This brings the time to upload a 4.5MB bitstream from 38:23 to 1:25. | |||
| 2017-02-22 | Refactor flash code. | Paul Selkirk | |
| 2017-02-21 | Use libcli return codes where appropriate; show whether PINs are set. | Paul Selkirk | |
| 2017-02-21 | Use bulk erase in the one place it makes sense. | Paul Selkirk | |
| 2017-02-20 | Move dangerous auto_erase functionality to where it's actually used. | Paul Selkirk | |
| 2017-02-19 | Remove unnecessary delays in flash code. | Paul Selkirk | |
 |
index : sw/stm32 | |
| Cryptech HSM on STM-32 ARM processor | git repositories |
| aboutsummaryrefslogtreecommitdiff |